SAE Papers

Paper Number	Paper Title	Book Number
2008-01-1650	Numerical Investigation on Fluid Flow of Gear Lubrication	V117-4
2008-01-1654	Remaining Lifetime Evaluation for Crankshaft Main Bearings
2008-01-1647	Simulated Analysis of a Motorbike High Performance Lubricantion Circuit
2007-01-1567	Adaptation of a Variable Displacement Vane Pump to Engine Lube Oil Applications	SP-2093
2007-01-1570	Basic Characteristics of Lead-Free Aluminum Alloy Bearings with Low Frictional Property of Adhered Molybdenum Disulfide	SP-2093
2007-01-1569	Development of Lead Free Copper Based Alloy for Bushing Under Boundary Lubrication	SP-2093
2007-01-1565	Development of an Oil Deterioration Monitoring System by Estimating Base Number	V116-3
2007-01-1566	Engine Wear Modeling with Sensitivity to Lubricant Chemistry: A Theoretical Framework	SP-2093
2007-01-0113	Influence of Electrical Current on Bearing Flaking Life	SP-2134
2007-01-1248	Investigations of Crank Offset and It's Influence on Piston and Piston Ring Friction Behavior Based on Simulation and Testing	V116-3
2007-01-1246	Mixed Lubrication and Roughness Surface Effects Application to Piston Rings	V116-3
2007-01-1440	Modeling and Measurement of Tribological Parameters between Piston Rings and Liner in Turbocharged Diesel Engine	SP-2073
2007-01-1568	Robust Optimization of Engine Lubrication System	SP-2093
2007-01-1250	The Effects of Piston Rings and Liner Break-in on Lubricating Condition	SP-2073
2006-01-0428	Application to Engine Development of Friction analysis by Piston Secondary Motion Simulation in Consideration of Cylinder Block Bore Distortion	SP-2013
2006-01-1105	Development of Lead Free Copper Based Alloy for Piston Pin Bushing Under Higher Load Engines
2006-01-0646	Evaluation of Cost Effective Coatings for Automotive Piston and Pin Assemblies	SP-2013
2006-01-1097	Lead-Free Replacements for SAE 792 for Bushing Applications
2006-01-1103	Newly Development Lead Free Copper Alloy Bushing for Fuel Injection Pump
2006-01-1102	Plain Bearings in High Performance Engines - Simulation Tools for Advanced Investigations and Layouts
2006-01-1099	Raman Characterization of Anti-Wear Films Formed from Fresh and Aged Engine Oils
2006-01-1101	Small End Conrod Lubrication
2006-01-1104	Studies on Lead-free Resin Overlay for Engine Bearings
2006-01-0358	The Effects of Cage Flexibility on Ball-to-Cage Pocket Contact Forces and Cage Instability in Deep Groove Ball Bearings
2006-01-0357	The Impact of Some Gear Lubricants on the Surface Durability of Rolling Element Bearings
2006-01-0648	The Measurement Of Liner - Piston Skirt Oil Film Thickness By An Ultrasonic Means	SP-2013
2006-01-1098	Wear of Valve-Train Components Due to Soot Contaminated Lubricant
2005-01-1866	A New Family of Lead-Free, Aluminum-Base Engine Bearing Alloys	SP-1967
2005-01-1869	Advanced Bearing Solutions for Enhancing the Fuel Efficiency and Improving the Noise, Vibration and Harshness Behavior of Modern Automotive Driveline Applications	SP-1967
2005-01-1863	Development of Lead Free Overlay for Three Layer Bearings of Highly Loaded Engines	SP-1967
2005-01-1867	Development of Oil Aeration Meter for Internal Combustion Engine	SP-1967
2005-01-1652	Engine Friction Reduction Through Liner Rotation	SP-1964
2005-01-1865	Maintenance-Free and Low-Maintenance Plain Bearings for Added Car Comfort	SP-1967
2005-01-1864	Modelling of the Asperity Contact Area on Actual 3D Surfaces	SP-1967
2005-01-1647	Research Into Surface Improvement for Low Friction Pistons	SP-1964
2005-01-1868	Research Work for Clarifying the Mechanism of White Structure Flaking and Extending the Life of Bearings	SP-1967
2004-01-2693	Preload Adjustments of Wheel Bearings on Tractor-Trailer Combinations - The Factors of Compliance
2004-01-1600	Development of Lead-Free-Copper-Based Alloy for Three Layers Bearings Under Higher Load Engines
2004-01-1602	Displacement Versus Flow Control in Ic Engines Lubricating Pumps
2004-01-1599	Influence of Design Parameters on the Lubrication of a High-Speed Connecting Rod Bearing
2004-01-1601	Modelling and Simulation of Variable Displacement Vane Pumps for Ic Engine Lubrication
2003-01-3743	Angular Contact Ball Bearings for a Rear Axle Differential
2003-01-3611	CorrotectSr Rust Prevention for Rolling Bearings and Precision Parts
2003-01-3552	Dynamic Analysis of Flexible Couplings in Rotor-Bearing-Coupling Systems
2003-01-3557	Finite Difference Model for Journal Bearings Applied in the Camshaft Support Elements
2003-01-3668	High Performance Ball Joint
2003-01-0243	A Study for Measurement of Oil Film Thickness on Engine Bearing By Using Laser-Induced Fluorescence (Lif) Method
2003-01-0245	Journal Bearing Analysis in Engines Using Simulation Techniques
2003-01-0244	New Conceptual Lead-Free Overlays Consisted of Solid Lubricant for Internal Combustion Engine Bearings
2003-01-1387	The Impact of Axial Bearing Profile on Engine Bearing Performance
2002-32-1848	Study on Bearing Lubricity of Two-Cycle Engine Oil
2002-01-1314	A New Concept Thrust Washer for Gasoline and Diesel Engines
2002-01-0296	A Study of Oil Film Pressure Distribution on Connecting Rods Big Ends
2002-01-0297	Experimental Study for High Specific Load Bearings in the Diesel Engine
2002-01-1369	Experimental and Analytical Methods for Assessing Bearing Performance Under Debris-Contaminated Lubrication Conditions
2002-01-1315	Lubrication and Ventilation System of Modern Engines--Measurements, Calculations and Analysis
2002-01-1372	Metrics and Conversions for Process Quality
2002-01-1370	Off-Highway Truck Wheel Bearing Performance Testing
2002-01-0298	Parametric Study for Design Factors on Engine Bearings By Using Tehl Analysis
2002-01-1319	The Controlled Vane-Type Oil Pump for Oil Supply on Demand for Passenger Car Engines
2002-01-0295	The Effect of Crankshaft Flexibility on the Ehl of Connecting Rod Bearings	PT-100
2002-01-1371	The Effect of Microstructure on Debris-Dented Rolling Element Bearing Performance
2002-01-1316	The Progression of Engine Bearing Overlays
2002-01-0299	Universal Joint Grease Development
2001-01-1075	A New Transient Elastohydrodynamic (Ehd) Bearing Model Linkable to AdamsSr
2001-01-1079	Analysis of the Frequency, Causes and Consequences of a Common Quality Problem in the Babbit Coating of Trimetal Journal Bearings
2001-01-1073	Engine Lubrication System Model for Sump Oil Temperature Prediction
2001-01-1077	New Aluminum Alloy Bearing With Higher Wear Resistance
2001-01-1074	Oil Aeration in Combustion Engines--Analysis and Optimization
2001-01-1076	Theoretical Analysis of Engine Bearing Considering Both Elastic Deformation and Oil Film Temperature Distribution
2000-01-3299	Bearings Performance Simulation With Elasto-Hydrodynamic Lubrication (Ehl) Model
2000-01-3189	Linear Model Updating Applied to Rotating Machines
2000-01-2605	"Zero Defects", Statistically Considered
2000-01-2603	Comparison of Plain Bushing Technologies for Reduced Grease Consumption in Construction Equipment
2000-01-2602	Development of Heat Resistant Long Life Through Hardening Bearing Steel (Stj2)
2000-01-2601	Development of a New Life Equation for Ball and Roller Bearings
2000-01-2604	Select-A-SealSt, a New Flange Sealing Technology
2000-01-1340	A Method to Determine the Two Components of the Crankshaft Load on a Bearing Cap in Firing Engines
2000-01-1338	A Study of Microgrooved Bearing Performance By Using Numerical Analysis
2000-01-1339	Hybrid Ceramic Ball Bearings for Turbochargers
2000-01-1341	Measured Crankshaft Bearing Oil Flow and Temperatures With a Full and Partial Groove Main Bearing
1999-01-3036	Roller Bearing Design Optimization Applying Hertz Contact Theory
1999-01-2793	A Bearing Life Prediction Method for Utilizing Progressive Functional Surface Damage Analysis From a Debris-Contaminated Lubrication Environment
1999-01-2790	A Study of the Effect of Friction on Bearing Surface Fatigue Taking Into Account the Microplastic Deformation
1999-01-2791	Assessing and Predicting the Performance of Bearings in Debris-Contaminated Lubrication Environment
1999-01-2789	Design Target and Life Cycle Cost Management Through Bearing Value Analysis
1999-01-2792	Development of Long-Life Needle Roller and Cage Assembly With Special Specification and Shaft With Unique Heat Treatment
982030	A Rational Approach for Determining Permissible Speed for Needle Roller Bearings
982028	Material and Heat Treatment Effect on the Bearing Inner Ring Fracture Under Hoop Stress
982029	The Analysis of Frictional Torque for Tapered Roller Bearings Using Ehd Theory
970214	A Study of Three-Layer Copper-Lead Bearings Without Nickel Barrier
970217	A Study of the Behavior of Connecting Rod Bearings Using An Ehl Predictive Tool
970213	Bearing Loads in a Vehicular Flywheel Battery
970216	The Influence of Circumferential Waviness of the Journal on the Lubrication of Dynamically Loaded Journal Bearings
810801	A Study of Lubricating Oil Performance in a Journal Bearing Rig, Ii
810798	A Test to Relate the Loss of Hydrodynamic Lubrication in An Automotive Journal Bearing to Lubricant Viscosity
810758	Applications of Pre-Packaged Wheel Bearing Assemblies
810757	Automotive Hub Bearing Units--European Experience
810799	Influence of the Effective Viscosity on Bearing Performance
810755	Integral Ball Bearing Spindles for Automotive Wheel Applications
790744	Axle Efficiency--Test Procedures and Results
710829	New Look At Swash-Plate Drive Mechanisms
080015	What carbon does to automobile steel
070008PPR	The influence of acid and rust on ball bearings
060002	Ball bearings