SAE Papers

Paper Number	Paper Title	Book Number
2009-01-0895	Analysis of Compromising Degree of an Internal Combustion Engine Using Biodiesel	V118-3
2009-01-0890	Characterization of Zirconium Oxide-Based Pretreatment Coatings. Part 1 Variability in Coating Deposition on Different Metal Substrates	V118-5
2009-01-0892	Characterization of Zirconium Oxide-Based Pretreatment Coatings. Part 2: Challenges in Coating Aluminum Body Panels	V118-5
2009-01-0894	Viscosity Controlled High Penetration Wax on Paint Process	V118-5
2008-01-1158	A Replacement for Phosphate Conversion Coating Based on Hexafluorozirconic Acid
2008-01-1154	Corrosion Testing and Evaluation of Automotive and Military Coatings in the Hawaiian Islands - 3-year Update	V117-5
2008-01-1156	Development of an Improved Cosmetic Corrosion Test for Aluminum Autobody Panels: Correlation of Laboratory and On-Vehicle Results	V117-5
2008-01-1155	Film Formation on Magnesium Alloys Due to Corrosion in Aqueous Solutions and Engine Coolants
2008-01-1153	New Conversion Coatings Update for the Automotive Industry	V117-5
2007-01-0418	Development of Sealing Material Used in the Body Welding Shop	V116-5
2007-01-0415	Development of Sintered Bearing Material with Higher Corrosion Resistance for Fuel Pumps	V116-5
2007-01-0417	Development of an Improved Cosmetic Corrosion Test for Finished Aluminum Autobody Panels	V116-5
2007-01-0416	New Generation Conversion Coatings for the Automotive Industry	V116-5
2006-01-1649	Corrosion Evaluation of Army and Automotive Materials in Hawaii
2006-01-1645	Method Development for Evaluating Microbiological Growth on and Attachment to Aluminum Air Conditioner Evaporator Core Surfaces
2006-01-1648	Use of Personal Digital Assistants (PDAs) to Collect Corrosion Inspection Data
2006-01-1671	Variation in Corrosion Resistance of Trivalent Chromate Coating Depending on Type of Zinc Plating Bath
2005-01-0539	Corrosion Behaviour of Hypereutectic Al-Si-Cu Alloys Used in Cylinder Liners
2005-01-0541	Corrosion Product Analysis of Aluminum Closure Panels
2005-01-0542	Development of An Improved Cosmetic Corrosion Test for Finished Aluminum Autobody Panels
2005-01-0540	Evaluation of the Corrosion Resistance of Steel Systems for Automobile Fuel Tanks
2005-01-0543	Gamma Phase Zinc Nickel Electrodeposits From Alkaline Electrolyte
2004-01-0062	Method of Heat Reduction for Vehicle Traction Motor Inverter Locked At Standstill on a Climbing Slope
2003-01-3666	Composite Stabilizer Bar Link
2003-01-3611	CorrotectSr Rust Prevention for Rolling Bearings and Precision Parts
2003-01-1240	A Comparative Study of Corrosion Test Environments At Three Proving Grounds
2003-01-1241	An Obliquely Incident X-Ray Radiography to Measure Greatest Corrosion Depths in Automobile Metallic Plates
2003-01-1235	Development of An Improved Cosmetic Corrosion Test By the Automotive and Aluminum Industries for Finished Aluminum Autobody Panels
2003-01-1243	Development of New Conversion Coating System
2003-01-1239	Di Water Uses in Laboratory Corrosion
2003-01-1236	Examination of the Effects of Test Piece Spacing in Astm B117-97 Neutral Salt Spray and General Motors 9540p
2003-01-1242	New Zinc Phosphate Treatment Technologies for Automotive in 21st Century
2003-01-1238	Perforation Corrosion Performance of Autobody Steel Sheet in On-Vehicle and Accelerated Tests
2003-01-1237	Selective Galvanizing Using Kinetic Spraying
2003-01-1244	U. S. Automotive Corrosion Trends: 1998 SAE (Acap) Automotive Body Corrosion Survey Results
2003-01-1234	Update on the Developments of the SAE J2334 Laboratory Cyclic Corrosion Test
2002-01-0206	Corrosion Rates of Steel, Zinc and Bi-Metal Couples in the Field and in Laboratory Environments
2002-01-0207	New Epoxy-Based Autodepositing Coating System
2002-01-0205	Paint Integrity and Corrosion Sensor	PT-105
2001-01-2751	A Methodology of Using Topology Optimization in Finite Element Stress Analysis to Reduce Weight of a Structure
2001-01-2807	A Tool for Predicting Interior Sound Package Treatment in a Truck
2001-01-2743	A Two-Dimensional External Aerodynamics Tool (Eat) for Simulating Airflow Around Tractor-Trailer Combinations
2001-01-2712	An End-UserS Guide to Commercial Vehicle Measurements: Interpreting Dynamic and Structural Tests Outside the Lab
2001-01-2726	Analysis of Truck-Light Vehicle Crash Data for Truck Aggressivity Reduction	SP-1652
2001-01-2781	Auxiliary Axles - An Axle Manufacturers Perspective
2001-01-2782	Co-Simulation of Driveline Torque Bias Controls
2001-01-2791	Custom Configuration of a Vehicle Electrical Control System for Production and Service
2001-01-2759	Design for Manufacture of Cab-In-White Parts With Sheet Metal Forming Simulations
2001-01-2815	Development of Continuous Dilution Factor for Cvs Emissions Sampling and Calculation
2001-01-2753	Engineering Office Process Automation With Workflow One Year Later
2001-01-2755	Factors Affecting the Friction Coefficients Between Wooden Pallets and the Wooden Floor of a Van-Type Semi- Trailer
2001-01-2752	Leveraging Product Configurators in Service Parts and Aftermarket Applications
2001-01-2821	Methods for In-Vehicle Measurement of Truck Driver Postures	SP-1652
2001-01-2810	Optimum Engine Mounting Layout By Genetic Algorithm
2001-01-2760	System Modules, the Impacts on Truck Cab Assembly
2001-01-2732	The Effect of Kingpin Inclination Angle and Wheel Offset on Medium-Duty Truck Handling
2001-01-2725	Tools for Occupant Protection Analysis	SP-1652
2001-01-2808	Visualization of Truck Interior Noise
2001-01-3157	Validation Testing of An Environmentally Friendly, Corrosion-Resistant Coating for Brake Rotors
2001-01-1182	A Chemical Base for Engine Coolant/Antifreeze With Improved Thermal Stability Properties
2001-01-1176	A New Tool for Corrosion Inhibitor Research
2001-01-0646	A Vehicle Micro Corrosion Environmental Study of Field and Proving Ground Tests
2001-01-0645	Development of Liquid Surface Conditioner
2001-01-1179	Elastomer Service Life Prediction in Organic Acid Coolants
2001-01-1185	Heat Exchange Characteristics of Silicate and Carboxylate-Based Coolants in Air-Cooled Engine Parts
2001-01-1175	Round Robin Study of Freezing Point of Coolants Using Manual and Automatic Methods
2001-01-1181	Standard Test Method for Cavitation and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
2001-01-3978	Study of Sea Transportation Effects on Corrosion of Cast Iron Cylinder Liners
2001-01-1180	The Effects of Contaminated Engine Coolants on the Service Life of Elastomers
2001-01-1184	The Role of Carboxylate-Based Coolants in Cast Iron Corrosion Protection
2000-01-0617	Epoxy Coatings for Automotive Corrosion Protection
982373	Collaborative Research Center Sfb 362 "Sheet Metal Technology"-Processes for Production and Applications
982375	Determination of Forming Limits for Aluminum Alloys
982376	Development and Processing of Density Reduced Magnesium Alloys
982372	Development of High Strength Hot Rolled Steel to Be Applied for Flanging Deformation
982409	Evolution of Ld-Srim: Recent Advances to Meet Market Demands
982374	Experimental Determination of Forming Limit Diagram (Fld) of Steel Sheets
982417	Injection Molding of Metals and Ceramics
982410	Material Consolidation for Automotive Interior and Exterior Parts Through Development of a High Performance Material
982407	New Microstructural Approaches for Improved Mechanical Properties of Multiphase Steels With Emphasis on Trip Steels
982408	Recent Experience With the Application of Trip and Other Advanced Multiphase Steels
982339	Surface Degradation of Mold-In-Color Polymers for Exterior Applications
982312	Vibration Control of Body-Mounted Plastic Mirror Design
970729	Applications and Advances in Autodeposition Coatings
971002	Automotive Body Component Field Corrosion Behavior in the De-Icing Salt Zone
970733	Automotive Corrosion Protection Practices in Europe
970736	Characterization of Corrosion Products and Corrosion Mechanisms on Automotive Coated Steels Subjected to Field and Laboratory Exposure Tests
971006	Corrosion Performance and Fuel Compatibility of Prepainted Zinc-Nickel Coated Steel for Fuel Tank Applications
971008	Corrosion Resistance of Gas Shielded Metal Arc Welds With E-Coat
970732	Effects of Coating Weight and Pretreatment on the Painted Corrosion Performance of Coated Steel Sheet
971003	Evaluation of the Corrosion Rate of Zn-Coated Steel Sheets for Automotive Body Use
970735	Filiform Corrosion of Aluminum Auto Body Sheet in Accelerated and Outdoor Environments
971007	Improved Methods for Testing the Durability of Corrosion Protection in Brake Fluids
970731	Influence of Surface Treatments on Durability of Painted Aluminum Alloys
971000	Laboratory Perforation Corrosion Tests of Autobody Steel Sheet
971001	Perforation Corrosion on Automotive Steel--Comparison of Accelerated Indoor Corrosion Test and Field Performance
970730	Reduction of Sludge in a Zinc Phosphating Process--A Doe Study
970734	Round-Robin Evaluation of a New Standard Laboratory Test for Cosmetic Corrosion
971004	Specifying Zinc Alloy Coatings for Improved Galvanic Corrosion Performance
971005	Stabilization Requirements for T409 (Uns S40900) Ferritic Stainless Steel
971009	Wire Bonding With Corrosion Resistant Wire for Under-The-Hood Automotive Applications
861963	Flow-Controlled Air Dryer Regeneration System
800800	A Rapid Method to Predict the Effectiveness of Inhibited Engine Coolants in Aluminum Heat Exchangers
800799	Prevention of Zinc Sublimation From Alclad Vacuum Brazing Sheet By Calcium Addition to 7072 Cladding
790659	Effect of "Sour" Gasoline on Fuel Hose Rubber Materials
780662	Conventional Brake Fluids--State of the Art
710839	Short-Trip Engine Oil Rust Testing
080015	What carbon does to automobile steel