|
|
SAE Standards
| Number |
Title |
Publication Date / Revision Num |
| AMS4077G |
Aluminum Alloy Sheet and Plate, Alclad One Side, 4.4Cu - 1.5Mg - 0.60Mn (Clad One Side 2024-0), Annealed |
OCT 2009 / G |
| AMS4079G |
Aluminum Alloy, Drawn, Round, Seamless, Tubing, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O), Close Tolerance, Annealed |
OCT 2009 / G |
| AMS4004D |
Aluminum Alloy, Foil, 2.5Mg - 0.25Cr (5052-H191), Strain Hardened |
OCT 2009 / D |
| AMS4190J |
Aluminum Alloy, Welding Wire 5.2Si (4043) |
OCT 2009 / J |
| AMS2658C |
Hardness and Conductivity Inspection of Wrought Aluminum Alloy Parts |
OCT 2009 / C |
| AMS4333C |
Aluminum Alloy, Die Forgings, 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7452), Solution Heat Treated, Compression Stress-Relieved, and Overaged |
SEP 2009 / C |
| AMS4304B |
Aluminum Alloy, Discontinuously Reinforced Sheet, 2009/SiC/15w (T8P), Solution Heat Treated, Stretched, and Precipitation Heat Treated |
SEP 2009 / B |
| AMS4140J |
Aluminum Alloy Die Forgings, 4.0Cu - 2.0Ni - 0.68Mg (2018-T61), Solution and Precipitation Heat Treated (NONCURRENT Aug 2009) |
AUG 2009 / J |
| AMS4130M |
Aluminum Alloy Die Forgings, 4.4Cu - 0.85Si - 0.80Mn (2025-T6), Solution and Precipitation Heat Treated (NONCURRENT Aug 2009) |
AUG 2009 / M |
| AMS4125K |
Aluminum Alloy Die Forgings, and Rolled or Forged Rings, 0.90Si - 0.62Mg - 0.25Cr, (6151-T6) Solution and Precipitation Heat Treated (NONCURRENT Aug 2009) |
AUG 2009 / K |
| AMS4286F |
Aluminum Alloy Castings, Permanent Mold, 7.0Si - 0.32Mg (356.0-T51), As-Cast then Precipitation Heat Treated |
JUL 2009 / F |
| AMS4116H |
Aluminum Alloy, Bars, Rods, and Wire, 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T4), Cold Finished, Solution Heat Treated and Naturally Aged |
JUL 2009 / H |
| AMS4070M |
Aluminum Alloy, Drawn, Round Seamless Tubing, 2.5Mg - 0.25Cr (5052-0), Annealed |
JUL 2009 / M |
| AMS4069E |
Aluminum Alloy, Drawn, Round Seamless Tubing, Close Tolerance, 2.5Mg - 0.25Cr (5052-0) Annealed |
JUL 2009 / E |
| AMS4117J |
Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire and Flash Welded Rings, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr, (6061; -T6, -T651), Solution and Precipitation Heat Treated |
JUL 2009 / J |
| AMS4115H |
Aluminum Alloy, Rolled or Cold-Finished, Bars, Rods, Wire, and Flash Welded Rings, Annealed, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-0) |
JUL 2009 / H |
| AMS4635F |
Aluminum Bronze Bars, Rods, and Forgings, 87Cu - 9Al - 3Fe, Stress Relieved |
JUL 2009 / F |
| AMS4590C |
Extrusions, Nickel-Aluminum Bronze, Martensitic, 78.5Cu - 10.5Al - 5.1Ni - 4.8Fe, Quenched and Tempered (TQ50) |
JUL 2009 / C |
| AMS3412F |
Flux, Aluminum Brazing for Torch or Furnance Brazing |
JUL 2009 / F |
| AMS2355J |
Quality Assurance, Sampling and Testing, Aluminum Alloys and Magnesium Alloy, Wrought Products (Except Forging Stock), and Rolled, Forged, or Flash Welded Rings |
JUL 2009 / J |
| AMS4133E |
Aluminum Alloy Forgings and Rolled Rings, 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6), Solution and Precipitation Heat Treated |
MAR 2009 / E |
| AMSQQA250/24B |
Aluminum Alloy, 7075, Plate and Sheet (Improved Exfoliation Resistant) |
MAR 2009 / B |
| AMSQQA250/25B |
Aluminum Alloy, Alclad 7075 Plate and Sheet, Improved Exfoliation Resistant |
MAR 2009 / B |
| AMS4118L |
Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire, 4.0Cu - 0.70Mn - 0.60Mg - 0.50Si, (2017; -T4, -T451), Solution Heat Treated |
MAR 2009 / L |
| AMS4634B |
Aluminum Bronze Bars, Rods, and Forgings, 90.5Cu - 7.5Al - 1.9Si, Stress Relieved |
MAR 2009 / B |
| AMS4011D |
Aluminum, Foil and Light Gage Sheet, 99.45Al (1145-0) Annealed |
MAR 2009 / D |
| AMS4132F |
Aluminum Alloy, Die and Hand Forgings, Rolled Rings, and Forging Stock, 2.3Cu - 1.6Mg - 1.1Fe - 1.0Ni - 0.18Si - 0.07Ti (2618-T61), Solution and Precipitation Heat Treated |
DEC 2008 / F |
| AMS2505F |
Aluminum Paint Finishing, Low Baking (Cancelled Dec 2008) |
DEC 2008 / F |
| AMS2471G |
Anodic Treatment of Aluminum Alloys Sulfuric Acid Process, Undyed Coating |
DEC 2008 / G |
| MAM2771B |
Heat Treatment of Aluminum Alloy Castings (Cancelled Dec 2008) |
DEC 2008 / B |
| AMS4090E |
Aluminum Alloy, Plate, 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T651) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated |
NOV 2008 / E |
| AMSB20148A |
Brazing Sheet, Aluminum Alloy (Cancelled Nov 2008) |
NOV 2008 / A |
| AMS4141F |
Aluminum Alloy Die Forgings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73), Solution and Precipitation Heat Treated |
OCT 2008 / F |
| AMS4178E |
Core, Flexible Honeycomb, Aluminum Alloy, Treated for Sandwich Construction, 5052, 350 (177) |
OCT 2008 / E |
| AS3122A |
Pin, Expansion - Aluminum, 2024-T4 and 2024-T351, Long (UNS A92024) |
SEP 2008 / A |
| AS3121A |
Plug, Expansion - Aluminum, 2024-T4 and 2024-T351, Long; Std and .010 Oversize Diameters (UNS A92024) |
SEP 2008 / A |
| AS3220A |
Fitting, Sleeve, Flared, Aluminum |
AUG 2008 / A |
| AMSQQA250/11A |
Aluminum Alloy 6061, Plate and Sheet (Cancelled Jul 2008) |
JUL 2008 / A |
| AMS4312D |
Aluminum Alloy, Rolled or Forged Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T651, 6061-T652) Solution Heat Treated, Mechanically Stress Relieved and Precipitation Heat Treated |
JUL 2008 / D |
| AMS4310E |
Aluminum Alloy, Rolled or Forged Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T651, 7075-T652) Solution Heat Treated, Mechanically Stress Relieved and Precipitation Heat Treated |
JUL 2008 / E |
| AMS4025L |
Aluminum Alloy, Sheet and Plate, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-0) Annealed |
JUL 2008 / L |
| AMS4026M |
Aluminum Alloy, Sheet and Plate, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061; -T4 Sheet, -T451 Plate), Solution Heat Treated and Naturally Aged |
JUL 2008 / M |
| AMS4027N |
Aluminum Alloy, Sheet and Plate, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061; -T6 Sheet, -T651 Plate), Solution and Precipitation Heat Treated |
JUL 2008 / N |
| AMS4244B |
Aluminum Alloy, Welding Wire, 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti For Welding A206.0 Type Alloys |
JUL 2008 / B |
| AMS2469H |
Hard Anodic Coating on Aluminum and Aluminum Alloys |
JUL 2008 / H |
| AMS4285D |
Aluminum Alloy Castings, Centrifugal, 7.0Si - 0.30Mg (356.0-T6), Solution and Precipitation Heat Treated |
JUN 2008 / D |
| AMS4281G |
Aluminum Alloy Castings, Permanent Mold, 5.0Si - 1.2Cu - 0.50Mg (355.0-T6), Solution and Precipitation Heat Treated |
JUN 2008 / G |
| AMS4280J |
Aluminum Alloy Castings, Permanent Mold, 5.0Si - 1.2Cu - 0.5Mg (355.0-T71), Solution Heat Treated and Overaged |
JUN 2008 / J |
| AMS4284H |
Aluminum Alloy Castings, Permanent Mold, 7.0Si - 0.30Mg (356.0-T6), Solution and Precipitation Heat Treated |
JUN 2008 / H |
| AMS4048M |
Aluminum Alloy Sheet and Plate, Alclad 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075-0) Annealed |
JUN 2008 / M |
| AMS4063E |
Aluminum Alloy, Clad One Side, Sheet, 1.25 Mn - 0.12Cu (No. 11-0 Brazing Sheet), Annealed |
JUN 2008 / E |
| AMS4260G |
Aluminum Alloy, Investment Castings, 7.0Si - 0.32Mg (356.0-T6), Solution and Precipitation Heat Treated |
JUN 2008 / G |
| AMS4082P |
Aluminum Alloy, Seamless Drawn Tubing, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution and Precipitation Heat Treated |
JUN 2008 / P |
| AMS4044L |
Aluminum Alloy, Sheet and Plate, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr, Annealed (7075-0), or when specified, As Fabricated (7075-F) |
JUN 2008 / L |
| AMS4081J |
Aluminum Alloy, Tubing, Hydraulic, Seamless, Drawn, Round, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged |
JUN 2008 / J |
| AMS4214J |
Castings, Aluminum Alloy Sand, 5.0Si - 1.2Cu - 0.50Mg (355.0-T71), Solution Heat Treated and Overaged |
JUN 2008 / J |
| AMS4146G |
Aluminum Alloy Forgings and Rolled or Forged Rings, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061 - T4), Solution Heat Treated and Naturally Aged |
MAY 2008 / G |
| AMS4235B |
Aluminum Alloy Castings, 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (A206.0-T71), Solution and Precipitation Heat Treated |
MAR 2008 / B |
| AMS4215H |
Aluminum Alloy, Castings, 5.0Si - 1.2Cu - 0.50Mg (C355.0-T6), Solution and Precipitation Heat Treated |
MAR 2008 / H |
| AMS4246D |
Aluminum Alloy, Welding Wire, 7.0Si - 0.52Mg (357) (NONCURRENT Feb 2008) |
FEB 2008 / D |
| AMS3128G |
Aluminum Pigment Paste (NONCURRENT Jan 2000) (Cancelled Feb 2008) |
FEB 2008 / G |
| AMS2772E |
Heat Treatment of Aluminum Alloy Raw Materials |
FEB 2008 / E |
| AMSQQA200/2A |
Aluminum Alloy 2014, Bar, Rod, Shapes, Tube, and Wire, Extruded (NONCURRENT Jan 2008) |
JAN 2008 / A |
| AMSQQA200/4B |
Aluminum Alloy 5083, Bar, Rod, Shapes, Tube, and Wire, Extruded (NONCURRENT Jan 2008) |
JAN 2008 / B |
| AMS4274A |
Aluminum Alloy, Alclad Sheet, 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024-0), Annealed, Fine Grain |
JAN 2008 / A |
| AMS4064F |
Aluminum Alloy, Clad Two Sides Sheet, 1.25Mn - 0.12Cu (No. 12-0 Brazing Sheet), Annealed |
JAN 2008 / F |
| AMS4245D |
Aluminum Alloy, Welding Wire, 5.0Si - 1.2Cu - 0.50Mg (355) (NONCURRENT Jan 2008) |
JAN 2008 / D |
| AMS4191H |
Aluminum Alloy, Welding Wire, 6.3Cu - 0.30Mn - 0.18Zr - 0.15Ti - 0.10V (2319) (NONCURRENT Jan 2008) |
JAN 2008 / H |
| MAM2355E |
Quality Assurance, Sampling and Testing, Aluminum Alloys and Magnesium Alloys, Wrought Products, Except Forging Stock, and Rolled, Forged, or Flash Welded Rings (Cancelled Jan 2008, Superseded by AMS2355) |
JAN 2008 / E |
| ARP982D |
Minimizing Stress-Corrosion Cracking in Wrought Titanium Alloy Products |
DEC 2007 / D |
| AMS4122K |
Aluminum Alloy Bars, Rods, and Wire Rolled or Cold Finished, and Rings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6), Solution and Precipitation Heat Treated |
NOV 2007 / K |
| AMS4121H |
Aluminum Alloy Bars, Rods, and Wire, Rolled or Cold Finished, 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6), Solution and Precipitation Heat Treated |
NOV 2007 / H |
| AMS4347C |
Aluminum Alloy Sheet, 1.0Mg - 0.8Si - 0.8Cu - 0.5Mn (6013-T4), Solution Heat Treated and Naturally Aged |
NOV 2007 / C |
| ARP823E |
Minimizing Stress-Corrosion Cracking in Wrought Heat-Treatable Aluminum Alloy Products |
NOV 2007 / E |
| AMS4128D |
Aluminum Alloy Bars, Rolled or Cold Finished, 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451), Solution Heat Treated and Stress Relieved by Stretching |
OCT 2007 / D |
| AMS4184F |
Filler Metal, Aluminum Brazing, 10Si - 4.0Cu (4145) (Cancelled Oct 2007, Superseded by AWS S5.8, BAISi-3) |
OCT 2007 / F |
| AMS3414E |
Flux, Aluminum Welding |
OCT 2007 / E |
| AMSQQA250/8B |
Aluminum Alloy 5052, Plate and Sheet (NONCURRENT Sep 2007) |
SEP 2007 / B |
| AMSQQA200/6B |
Aluminum Alloy 5454, Bar, Rod, Shapes, Tube, and Wire, Extruded (NONCURRENT Sep 2007) |
SEP 2007 / B |
| AMSQQA250/10A |
Aluminum Alloy 5454, Plate and Sheet (NONCURRENT Sep 2007) |
SEP 2007 / A |
| AMS4006K |
Aluminum Alloy, Sheet and Plate, 1.25Mn - 0.12Cu (3003-0), Annealed (Cancelled Sep 2007, Superseded by ASTM B 209) |
SEP 2007 / K |
| AMSQQA250/18A |
Aluminum 7075, Plate and Sheet, Alclad One Side (NONCURRENT Aug 2007) |
AUG 2007 / A |
| AMSQQA200/9A |
Aluminum Alloy 6063, Bar, Rod, Shapes, Tube, and Wire, Extruded (Cancelled Aug 2007, Superseded by ASTMB221, ASTMB241) |
AUG 2007 / A |
| AMS4236B |
Aluminum Alloy Castings, 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (A206.0-T4), Solution Heat Treated and Naturally Aged |
AUG 2007 / B |
| AMS4189G |
Aluminum Alloy Welding Wire, 4.1Si - 0.20 Mg (4643) (Cancelled Aug 2007, Superseded by AWS A5.10, ER4643) |
AUG 2007 / G |
| AMS4041Q |
Aluminum Alloy, Alclad Sheet and Plate, 4.4Cu - 1.5Mg - 0.60Mn, Alclad 2024 and 1-1/2% Alclad 2024, -T3 Flat Sheet; 1-1/2% Alclad 2024-T351 Plate |
AUG 2007 / Q |
| AMSQQA225/7A |
Aluminum Alloy, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished, 5052 (Cancelled Aug 2007, Superseded by ASTM B 211, alloy 5052) |
AUG 2007 / A |
| AMS4342E |
Aluminum Alloy, Extrusions, 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T74511), Solution Heat Treated, Stress Relieved, Straightened, and Overaged |
AUG 2007 / E |
| AMS4311E |
Aluminum Alloy, Rolled or Forged Rings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7351, 7075-T7352), Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated |
AUG 2007 / E |
| AMS2472F |
Anodic Treatment of Aluminum Alloys, Sulfuric Acid Process, Dyed Coating |
AUG 2007 / F |
| ARP1947B |
Dendrite Arm Spacing of Structural Aircraft Quality D357 Aluminum Alloy Castings, Determination and Acceptance of |
AUG 2007 / B |
| AMS4143E |
Aluminum Alloy Forgings and Rolled or Forged Rings, 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T6), Solution and Precipitation Heat Treated |
JUL 2007 / E |
| AMS4242B |
Aluminum Alloy, Castings, 4.7Cu - 0.60Ag - 0.35Mn - 0.25Mg - 0.25Ti (B201.0-T7), Solution Heat Treated and Overaged |
JUL 2007 / B |
| AMS4067J |
Aluminum Alloy, Drawn Round Seamless Tubing, 1.25Mn - 0.12Cu (3003-H14), Strain Hardened (Cancelled Jul 2007, Superseded by ASTM B 210, Alloy 3003, Temper H14) |
JUL 2007 / J |
| AMS4062J |
Aluminum Alloy, Drawn Seamless Round Tubing, (1100-H14), Strain Hardened (Cancelled Jul 2007, Superseded by ASTM B 210, Alloy 1100, Temper H14) |
JUL 2007 / J |
| AMS4065K |
Aluminum Alloy, Drawn Seamless Tubing, 1.2Mn - 0.12Cu (3003-0), Annealed (Cancelled Jul 2007, Superseded by ASTM B 210, Alloy 3003, Temper 0) |
JUL 2007 / K |
| AMS2427D |
Aluminum Coating, Ion Vapor Deposition |
JUL 2007 / D |
| AMS4001J |
Aluminum Sheet and Plate, 0.12Cu (1100-0), Annealed (Cancelled Jul 2007) |
JUL 2007 / J |
| AMS4180G |
Aluminum Wire, 99.0Al Minimum (1100-H18) |
JUL 2007 / G |
| AMSQQA250/26B |
Aluminum 7075, Plate and Sheet, Alclad 7011 (Cancelled Jun 2007, Superseded by ASTM B 209) |
JUN 2007 / B |
| AMSQQA200/1A |
Aluminum Alloy 3003, Bar, Rod, Shapes, Tube, and Wire, Extruded (Cancelled Jun 2007, Superseded by ASTMB241, ASTMB221) |
JUN 2007 / A |
| AMSQQA200/5A |
Aluminum Alloy 5086, Bar, Rod, Shapes, Tube, and Wire, Extruded (NONCURRENT Jun 2007) |
JUN 2007 / A |
| AMSQQA200/7B |
Aluminum Alloy 5456, Bar, Rod, Shapes, Tube, and Wire, Extruded (NONCURRENT Jun 2007) |
JUN 2007 / B |
| AMSQQA200/10A |
Aluminum Alloy 6066, Bar, Rod, Shapes, Tube, and Wire, Extruded (Cancelled Jun 2007, Superseded by ASTMB241, ASTMB221) |
JUN 2007 / A |
| AMSQQA200/17A |
Aluminum Alloy 6162, Bar, Rod, Shapes, Tube, and Wire, Extruded (Cancelled Jun 2007, Superseded by ASTMB221, ASTMB241) |
JUN 2007 / A |
| AMS4111D |
Aluminum Alloy Forgings, 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr (7049-T73), Solution and Precipitation Heat Treated |
JUN 2007 / D |
| AMSA22771A |
Aluminum Alloy Forgings, Heat Treated (NONCURRENT Jun 2007) |
JUN 2007 / A |
| AMSQQA225/3A |
Aluminum Alloy, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished, 2011 (Cancelled Jun 2007, Superseded by ASTM B 211) |
JUN 2007 / A |
| AMSQQA225/10A |
Aluminum Alloy, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished, 6262 (Cancelled Jun 2007, Superseded by ASTM B 211) |
JUN 2007 / A |
| AMS4225D |
Aluminum Alloy, Heat-Resistant, Castings, 5.0Cu - 1.5Ni - 0.25Mn - 0.25Sb - 0.25Co - 0.20Ti - 0.20Zr (203.0-T6), Solution Heat Treated and Precipitation Heat Treated |
JUN 2007 / D |
| AMSQQA200/16A |
Aluminum Alloy, Structural Shapes, Extruded, 6061 (Cancelled Jun 2007, Superseded by ASTM B 221, Alloy 6061) |
JUN 2007 / A |
| AMS2450G |
Sprayed Metal Finish, Aluminum (CANCELLED June 2007) |
JUN 2007 / G |
| AMS4157D |
Aluminum Alloy Extrusions, 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T73511), Solution Heat Treated, Stress Relieved, and Overaged |
MAY 2007 / D |
| AMS4045J |
Aluminum Alloy Sheet and Plate, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr 7075: (-T6 Sheet, -T651 Plate), Solution and Precipitation Heat Treated |
MAY 2007 / J |
| AMS4100D |
Aluminum Alloy, Alclad, Sheet, 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (Alclad 7475-T761), Solution and Precipitation Heat Treated |
MAY 2007 / D |
| AMS4306B |
Aluminum Alloy, Plate, 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr (7150-T6151), Solution Heat Treated, Stress Relieved, and Aged |
MAY 2007 / B |
| AMS4013F |
Aluminum Sheet, Laminated, Surface Bonded |
MAY 2007 / F |
| AMS5047F |
Steel, Sheet and Strip, 0.08 - 0.13C, Aluminum Killed (SAE 1010), Deep Forming Grade |
MAY 2007 / F |
| AMSQQA250/1A |
Aluminum 1100, Plate and Sheet (Cancelled Apr 2007, Superseded by ASTM B 209, Alloy 1199) |
APR 2007 / A |
| AMSQQA250/2A |
Aluminum Alloy 3003, Plate and Sheet (Cancelled Apr 2007, Superseded by ASTM B 209, Alloy 3003) |
APR 2007 / A |
| AMSQQA250/14A |
Aluminum Alloy 7178, Plate and Sheet (NONCURRENT Apr 2007) |
APR 2007 / A |
| AMSQQA250/15B |
Aluminum Alloy Alclad 7178, Plate and Sheet (NONCURRENT Apr 2007) |
APR 2007 / B |
| AMS4303B |
Aluminum Alloy Plate, 2.7Cu - 2.2Li - 0.12Zr (2090-T81), Solution Heat Treated, Cold Worked, and Aged (NONCURRENT Apr 2007) |
APR 2007 / B |
| AMSQQA250/28B |
Aluminum Alloy, 7011 Alclad 7178 Plate and Sheet (NONCURRENT Apr 2007) |
APR 2007 / B |
| AMSQQA200/14A |
Aluminum Alloy, Bar, Rod, Shapes, and Wire, Extruded, 7178-T76, Improved Exfoliation Resistance (NONCURRENT Apr 2007) |
APR 2007 / A |
| AMSQQA225/1B |
Aluminum Alloy, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished, 1100 (Cancelled Apr 2007, Superseded by ASTM B 211, Alloy 1100) |
APR 2007 / B |
| AMSQQA225/2A |
Aluminum Alloy, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished, 3003 (Cancelled Apr 2007) |
APR 2007 / A |
| AMS4223D |
Aluminum Alloy, Castings, 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T4), Solution Heat Treated and Naturally Aged |
APR 2007 / D |
| AMS4217H |
Aluminum Alloy, Castings, 7Si - 0.3Mg (356.0-T6), Solution and Precipitation Heat Treated |
APR 2007 / H |
| AMS4237B |
Aluminum Alloy, Castings, Sand, 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (206.0-T71), Solution Heat Treated and Naturally Aged (Cancelled Apr 2007) |
APR 2007 / B |
| AMS4003H |
Aluminum Alloy, Sheet and Plate, 0.12cu (1100-H14), Strain Hardened (Cancelled Apr 2007, Superseded by ASTM B 209 alloy 1100, temper H14) |
APR 2007 / H |
| AMS2470M |
Anodic Treatment of Aluminum Alloys, Chromic Acid Process |
APR 2007 / M |
| AMSQQA200/13B |
Aluminum Alloy 7178, Bar, Rod, Shapes, Tube, and Wire, Extruded (NONCURRENT Mar 2007) |
MAR 2007 / B |
| AMSQQA250/22B |
Aluminum Alloy, 7178-T76, Alclad Plate and Sheet, Improved Exfoliation Resistant (NONCURRENT Mar 2007) |
MAR 2007 / B |
| AMSQQA250/21B |
Aluminum Alloy, 7178-T76, Plate and Sheet Improved Exfoliation Resistant (NONCURRENT Mar 2007) |
MAR 2007 / B |
| AMS4270B |
Aluminum Alloy, Alclad Flat Sheet 4.1Cu - 1.4Mg - 0.45Mn (Alclad 2424-T3) Solution Heat Treated and Cold Worked (NONCURRENT Mar 2007) |
MAR 2007 / B |
| AMS4296B |
Aluminum Alloy, Alclad Sheet and Plate 4.3Cu - 1.4Mg - 0.60Mn (Alclad 2524-T3) Solution Heat Treated and Cold Worked |
MAR 2007 / B |
| AMS4088K |
Aluminum Alloy, Drawn, Seamless Tubing 4.4Cu - 1.5Mg - 0.60Mn (2024-T3) Solution Heat Treated and Cold Worked |
MAR 2007 / K |
| ARP1575B |
Surface Preparation and Priming of Aluminum Alloy Parts for High Durability Structural Adhesive Bonding, Hand Applied Phosphoric Acid Anodizing (NONCURRENT Mar 2007) |
MAR 2007 / B |
| AMSQQA250/7A |
Aluminum Alloy 5086, Plate and Sheet (Cancelled Feb 2007, Superseded by ASTM B 209B 209M) |
FEB 2007 / A |
| AMS4152M |
Aluminum Alloy Extrusions 4.4Cu - 1.5Mg - 0.60Mn (2024-T3) Solution Heat Treated |
FEB 2007 / M |
| AMS4147D |
Aluminum Alloy Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7352) Solution Heat Treated, Stress Relieved by Compression, and Overaged |
FEB 2007 / D |
| AMS4078G |
Aluminum Alloy Plate (7075-T7351) Solution Heat Treated, Stress Relieved, and Overaged |
FEB 2007 / G |
| AMS4015L |
Aluminum Alloy, Sheet and Plate 2.5Mg - 0.25Cr (5052-0) Annealed |
FEB 2007 / L |
| AMS4031G |
Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-0) Annealed |
FEB 2007 / G |
| AMS4010C |
Aluminum Alloy Foil, 1.25Mn - 0.12Cu (3003-H18) (Cancelled Oct 2006) |
OCT 2006 / C |
| AMS4297A |
Aluminum Alloy Sheet, 4.4Cu - 1.5Mg - 0.60Mn (2024; -T4 Flat Sheet), Solution Heat Treated, High Formability |
OCT 2006 / A |
| AMS4008K |
Aluminum Alloy, Sheet and Plate, 1.25Mn - 0.12Cu (3003-H14) Strain Hardened (Cancelled Oct 2006, Superseded by ASTM B 209) |
OCT 2006 / K |
| AMS4036K |
Aluminum Alloy, Sheet and Plate, Alclad One Side, 4.4Cu - 1.5Mg - 0.60Mn, Alclad One Side 2024 and 1-1/2% Alcald One Side 2024-T3 Sheet; 1-1/2% Alclad One Side 2024-T351 Plate (NONCURRENT Oct 2006) |
OCT 2006 / K |
| AMS4300C |
Boron-Aluminum Composite Sheet, 50 v/o 5.6B, 6061-0, for Diffusion Bonding |
OCT 2006 / C |
| AMS7488E |
Rings, Flash Welded, Aluminum and Aluminum Alloys |
OCT 2006 / E |
| AMSQQA250/6A |
Aluminum Alloy 5083, Plate and Sheet |
SEP 2006 / A |
| AMSQQA250/9A |
Aluminum Alloy 5456, Plate and Sheet |
SEP 2006 / A |
| AMS4239D |
Aluminum Alloy Castings, Sand, 6.8Mg - 0.18Ti - 0.18Mn (535.0-0), Annealed (Cancelled Sep 2006) |
SEP 2006 / D |
| AMS4238E |
Aluminum Alloy Castings, Sand, 6.8Mg - 0.18Ti - 0.18Mn (535.0-F), As Cast (Cancelled Sep 2006) |
SEP 2006 / E |
| AMS4138B |
Aluminum Alloy Forgings, 4.3Zn - 3.3Mg - 0.60Cu - 0.20Mn - 0.18Cr (7079-T6) (Cancelled Sep 2006) |
SEP 2006 / B |
| AMS4248B |
Aluminum Alloy Hand Forgings and Rolled Rings, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T652), Solution Heat Treated, Stress Relief Compressed, and Precipitation Heat Treated |
SEP 2006 / B |
| AMS4087H |
Aluminum Alloy Tubing, Seamless, Drawn, (2024-0), Reinstate Composition Annealed |
SEP 2006 / H |
| AMS4254B |
Aluminum Alloy, Aramid Fiber Reinforced, Laminated Sheet, 4.4Cu - 1.5Mg - 0.6Mn (2024-T3), 3, 5, 7, or 9 Ply (NONCURRENT Sep 2006) |
SEP 2006 / B |
| AMS4086N |
Aluminum Alloy, Drawn, Round, Seamless Hydraulic Tubing, 4.4Cu - 1.5Mg - 0.6Mn (2024-T3), Solution Heat Treated, Cold Worked and Naturally Aged |
SEP 2006 / N |
| AMS4337A |
Aluminum Alloy, Extruded Profiles (7055-T77511), 8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr, Solution Heat Treated, Stress Relieved, and Overaged |
SEP 2006 / A |
| AMS4344C |
Aluminum Alloy, Extrusions, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T73511), Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged |
SEP 2006 / C |
| AMS4341E |
Aluminum Alloy, Extrusions, 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T73511), Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged |
SEP 2006 / E |
| AMS4340E |
Aluminum Alloy, Extrusions, 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T76511), Solution Heat Treated, Stress Relieved, Straightened, and Overaged |
SEP 2006 / E |
| AMS4302B |
Aluminum Alloy, Laminated, Sheet, Aramid Fiber Reinforced, 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T761), 3, 5, 7, or 9 Ply (NONCURRENT Sep 2006) |
SEP 2006 / B |
| AMS4016L |
Aluminum Alloy, Sheet and Plate, 2.5Mg - 0.25Cr (5052-H32), Strain Hardened, Quarter-Hard, and Stabilized |
SEP 2006 / L |
| AMS4253B |
Aluminum Alloy-Aramid Fiber Reinforced-Laminated Sheet, 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T61), 3, 5, 7, or 9 Ply (Cancelled Sep 2006) |
SEP 2006 / B |
| AMS4177D |
Core, Flexible Honeycomb, Aluminum Alloy, for Sandwich Construction, 5056, 350 (177) |
SEP 2006 / D |
| AMS4348D |
Core, Honeycomb Aluminum Alloy, Corrosion Inhibited, for Sandwich Construction, 5052, 350 (177) |
SEP 2006 / D |
| AMS4349D |
Core, Honeycomb, Aluminum Alloy, Corrosion Inhibited for Sandwich Construction 5056, 350 (177) |
SEP 2006 / D |
| AMS4258A |
Laminated Sheet Aluminum Alloy, Aramid Fiber Reinforced, 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (Alclad, One Side 7475-T761) 5 or 7 Ply (NONCURRENT Sep 2006) |
SEP 2006 / A |
| AMSQQA250/19A |
Aluminum Alloy 5086, Plate and Sheet for Sea Water Applications (Cancelled Aug 2006) |
AUG 2006 / A |
| AMSQQA250/20A |
Aluminum Alloy 5456, Plate and Sheet, for Sea Water Applications (Cancelled Aug 2006) |
AUG 2006 / A |
| AMS4148E |
Aluminum Alloy Die Forgings (7175-T66) Solution and Precipitation Heat Treated (NONCURRENT Aug 2006) |
AUG 2006 / E |
| AMS4207B |
Aluminum Alloy Sheet, Alclad, 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T61) Solution and Precipitation Heat Treated |
AUG 2006 / B |
| AMS4028G |
Aluminum Alloy, Sheet and Plate, 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg, Annealed (NONCURRENT Aug 2006) |
AUG 2006 / G |
| AMS3415D |
Flux, Aluminum Dip Brazing, 1030 °F (554 °C) or Lower Liquidus |
AUG 2006 / D |
| AMS2770H |
Heat Treatment of Wrought Aluminum Alloy Parts |
AUG 2006 / H |
| AMS7912B |
Aluminum-Beryllium Alloy, Extrusions, 38Al - 62Be, Annealed |
JUL 2006 / B |
| AMS7913B |
Aluminum-Beryllium Alloy, Sheet and Plate, 38Al - 62Be |
JUL 2006 / B |
| ARP891B |
Determination of Aluminum Alloy Tempers Through Electrical Conductivity Measurement (Eddy Current) (Cancelled Jul 2006) |
JUL 2006 / B |
| AMS4114H |
Aluminum Alloy Bars and Rods, Rolled or Cold-Finished, 2.5Mg - 0.25Cr (5052-F), as Fabricated |
JUN 2006 / H |
| AMS4279B |
Aluminum Alloy, Alclad Sheet, 4.4Cu - 1.5Mg - 0.60Mn (2024 -T4 Flat Sheet), Solution Heat Treated, High Formability |
JUN 2006 / B |
| AMS4005D |
Aluminum Alloy, Foil, 5.0Mg - 0.12Mn - 0.12Cr (5056-H191), Strain Hardened (Cancelled Jun 2006) |
JUN 2006 / D |
| AMS4029K |
Aluminum Alloy Sheet and Plate (2014; -T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treated |
MAY 2006 / K |
| AMS4134E |
Aluminum Alloy, Die Forgings, 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T4), Solution Heat Treated |
MAY 2006 / E |
| AMS4144F |
Aluminum Alloy, Hand Forgings and Rolled Rings, 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T852/T851), Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated |
MAY 2006 / F |
| AMS4247B |
Aluminum Alloy, Hand Forgings, 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T7352) Solution Heat Treated, Stress Relieved by Compression, and Precipitation Heat Treated |
MAY 2006 / B |
| AMS4251A |
Aluminum Alloy Sheet 2.7cu 2.2li 0.12zr (2090-T83) Solution Heat Treated, Cold Worked, and Precipitation Heat Treated |
MAR 2006 / A |
| AMS4085C |
Aluminum Alloy Sheet 5.7zn 2.2mg 1.6cu 0.22cr (7475-T761) Solution Heat Treated and Overaged |
MAR 2006 / C |
| AMS4295B |
Aluminum Alloy Sheet and Plate, 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr (2219 - O, F, T31, T351, T37, T81, T851, T87) |
FEB 2006 / B |
| AMS2474D |
Chemical Treatment for Aluminum Alloys, Low Electrical Resistance Coating (NONCURRENT) |
FEB 2006 / D |
| AMS4123H |
Aluminum Alloy, Rolled Or Cold Finished Bars and Rods (7075-T651) Solution and Precipitation Heat Treated |
JAN 2006 / H |
| AMS4273B |
Aluminum Alloy, Sheet and Plate (2424-T3 Flat Sheet and Plate) Solution Heat Treated and Cold Worked |
JAN 2006 / B |
| AMS4107F |
Aluminum Alloy Die Forgings (7050-T74) Solution Heat Treated and Overaged |
NOV 2005 / F |
| AMS4213 |
Aluminum Alloy Plate (2027-T351)4.4cu 1.2mg 0.8mn 0.10zr Solution Heat Treated, Cold Worked and Naturally Ages |
OCT 2005 |
| AMS4212J |
Aluminum Alloy, Castings 5.0si 1.2cu 0.50mg (355.0-T6), Solution and Precipitation Heat Treated |
OCT 2005 / J |
| AMS4183 |
Aluminum Alloy, Extruded Profiles (2027-T3511) 4.4cu 1.2mg 0.8mn 0.10zr Solution Heat Treated and Stress Relieved By Stretching |
OCT 2005 |
| AMS4320B |
Aluminum Alloy, Forgings, 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr (7149-T73), Solution and Precipitation Heat Treated |
SEP 2005 / B |
| AMS4208B |
Aluminum Alloy, Sheet, 6.0Cu - 0.40Zr - (2004-F), As Rolled |
SEP 2005 / B |
| AMS4209B |
Aluminum Alloy, Sheet, Alclad, 6.0Cu - 0.40Zr - (2004-F), As Rolled |
SEP 2005 / B |
| AMS4291G |
Aluminum Alloy, Die Castings 8.5si - 3.5cu (A390.0-F0 (See as 1990) as Cast |
AUG 2005 / G |
| AMS4290K |
Aluminum Alloy, Die Castings 9.5si 0.50mg, (360.0-F) (See as 1990) as Cast |
AUG 2005 / K |
| AMS4131D |
Aluminum Alloy, Die and Hand Forgings 5.6zn 2.5mg 1.6cu 0.23cr (7075-T-74), Solution and Precipitation Heat Treated and Aged |
AUG 2005 / D |
| AMS4126C |
Aluminum Alloy, Die and Hand Forgings and Rolled Rings 5.6zn 2.5mg 1.6cu 0.23cr (7079-T6) Solution and Precipitation Heat Treated |
AUG 2005 / C |
| AMS4160G |
Aluminum Alloy, Extrusions 1.0mg 0.60si 0.28cu 0.20cr (6061-0), Annealed |
AUG 2005 / G |
| AMS4172E |
Aluminum Alloy, Extrusions 1.0mg 0.60si 0.28cu 0.20cr (6061-T4511) Solution Heat Treated and Stress Relieved By Stretching |
AUG 2005 / E |
| AMS4174D |
Aluminum Alloy, Flash Welded Rings, 5.6zn 2.5mg 1.6cu 0.23cr (7075-T-73), Solution and Precipitation Heat Treated |
AUG 2005 / D |
| AMS4127J |
Aluminum Alloy, Forgings and Rolled Or Forged Rings, (6061-T6) Solution and Precipitation Heat Treated |
AUG 2005 / J |
| AMS4221B |
Aluminum Alloy, Plate 4.4cu 1.5mg 0.60mn (2124-T8151) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated |
AUG 2005 / B |
| AMS4276A |
Aluminum Alloy, Sheet 4.4cu 1.5mg 0.60mn (2024-0) Annealed, Fine Grained |
AUG 2005 / A |
| AMS4056G |
Aluminum Alloy, Sheet and Plate, 4.4mg 0.70mn 0.15cr (5083-0), Annealed |
AUG 2005 / G |
| AMS4873F |
Aluminum Bronze Castings, Sand, 85cu 11al 3.6fe, Solution Heat Treated and Tempered |
AUG 2005 / F |
| AMS4640G |
Aluminum Bronze, Bars, Rods, Shapes, Tubes, and Forgings 81.5cu 10.0al 4.8ni 3.0fe Drawn and Stress Relieved (Hr50) Or Temper Annealed (Tq50) |
AUG 2005 / G |
| AMS4227E |
Aluminum Alloy, Castings, Sand, 8.0cu 6.0mg 0.50mn 0.50ni, as Cast (Cancelled Jul 2005) |
JUL 2005 / E |
| AMS4322A |
Aluminum Alloy, Die Forgings 4.0mg 1.3li 1.2c 0.45 OD2 Mechanically Alloyed, As-Fabricated (Cancelled Jul 2005) |
JUL 2005 / A |
| AMS4202D |
Aluminum Alloy, Plate, 5.7zn 2.2mg 1.6cu 0.22cr (7475-T7351), Solution Heat Treated, Stress Relieved By Stretching, and Precipitation Heat Treated |
JUL 2005 / D |
| AMS4046F |
Aluminum Alloy, Sheet and Plate, Alclad One Side 5.6zn 2.5mg 1.6cu 0.23cr Solution and Precipitation Heat Treated |
JUL 2005 / F |
| AMS7911B |
Aluminum Beryllium, Preforms Hot Isostatic Pressed and Heat Treated 38al 62be |
JUL 2005 / B |
| AMS4880D |
Aluminum Bronze Alloy, Centrifugal and Continuous-Cast Castings 81.5cu 10.3al 5.0ni 2.8fe Quench Hardened and Temper Annealed (Tq50) |
JUL 2005 / D |
| AMSA21180A |
Aluminum-Alloy Castings, High Strength, Area Meca (NONCURRENT Jul 2005) |
JUL 2005 / A |
| AMS4203C |
Aluminum Alloy, Plate, 6.2zn 1.8cu 2.4mg 0.13zr (7010-T7351) Solution Heat Treated, Stress Relieved and Precipitation Heat Treated |
APR 2005 / C |
| AMS4210K |
Aluminum Alloy, Castings 5.0si 1.2cu 0.50mg (355.0-T51) Precipitation Heat Treated |
MAR 2005 / K |
| AMS4249A |
Aluminum Alloy, Castings 7.0si 0.58mg 0.15ti 0.06be (D357.0-T6) Solution and Precipitation Heat Treated (Requiring Fatigue and Fracture Toughness Testing) |
MAR 2005 / A |
| AMS4255B |
Aluminum Alloy, Clad One Side Sheet 0.6mg 0.35si 0.28cu (No. 21 Brazing Sheet) as Fabricated |
MAR 2005 / B |
| AMS4256B |
Aluminum Alloy, Clad Two Sides Sheet, 0.6Mg - 0.35Si - 0.28Cu (No. 22 Brazing Sheet) As Fabricated |
MAR 2005 / B |
| AMS4345B |
Aluminum Alloy, Extrusions, 6.4zn 2.4mg 2.2cu 0.12zr (7150-T77511) Solution Heat Treated, Stress-Relieved, Straightened, and Overaged |
MAR 2005 / B |
| AMS4252B |
Aluminum Alloy, Plate 6.4zn 2.4mg 2.2cu 0.12zr (7150-T7751), Solution Heat Treated, Stress Relieved, and Overaged |
MAR 2005 / B |
| AMS4021G |
Aluminum Alloy, Alclad Sheet and Plate, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (Alclad 6061-0), Annealed (NONCURRENT) |
FEB 2005 / G |
| AMS4307B |
Aluminum Alloy, Extrusions, 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr (7150-T61511), Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Precipitation Heat Treated (NONCURRENT) |
FEB 2005 / B |
| AMS4009B |
Aluminum Alloy, Foil, 1.0Mg - 0.6Si - 0.30Cu - 0.20Cr (6061-0), Annealed (NONCURRENT) |
FEB 2005 / B |
| AMS4200B |
Aluminum Alloy, Plate 7.7zn 2.4mg 1.6cu 0.16cr Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated |
FEB 2005 / B |
| AMS4314D |
Aluminum Alloy, Rings, Rolled Or Forged 4.5cu 0.85si 0.80mn 0.50mg (2014-T651, 2014-T652) Solution Heat Treated, Mechanically Stress Relieved and Precipitation Heat Treated |
FEB 2005 / D |
| AMS4318A |
Aluminum Alloy, Rolled or Cold Finished Bars and Rods, 12.2Si - 1.0Mg - 0.90Cu - 0.90Ni (4032-T86) Solution Heat Treated, Cold Worked, and Artificially Aged (Cancelled Feb 2005) |
FEB 2005 / A |
| AMS4084D |
Aluminum Alloy, Sheet 5.7zn 2.2mg 1.6cu 0.22cr Solution and Precipitation Heat Treated |
FEB 2005 / D |
| AMS4194C |
Aluminum Alloy, Sheet and Plate, Alclad, 4.4Cu - 1.5Mg - 0.60Mn, Solution Heat Treated and Cold Worked (NONCURRENT) |
FEB 2005 / C |
| AMS4051G |
Aluminum Alloy, Sheet and Plate, Alclad, 6.8Zn - 2.8Mg - 2.0Cu - 0.23Cr (Alclad 7178-0), Annealed (Cancelled Feb 2005) |
FEB 2005 / G |
| AMS3416B |
Flux, Aluminum Dip Brazing, 1090 °F (588 °C), Fusion Point (Cancelled Feb 2005) |
FEB 2005 / B |
| AMS4167H |
Aluminum Alloy, Extrusions, 5.6zn 2.5mg 1.6cu 0.23cr (7075-T73511) Solution Heat Treated, Stress Relieved By Stretching, and Overaged |
JAN 2005 / H |
| AMS4334A |
Aluminum Alloy, Forgings, 7.8Zn - 2.2Mg - 1.6Cu - 0.15Cr (7249-T74 and -T7452) (NONCURRENT) |
JAN 2005 / A |
| AMS4193C |
Aluminum Alloy, Sheet and Plate, 4.4cu 1.5mg 0.60mn (2024-T861), Solution Heat Treated, Cold Worked, and Precipitation Heat Treated |
JAN 2005 / C |
| AMS4343D |
Aluminum Alloy, Extrusions, 7.7zn 2.4mg 1.6cu 0.16cr, (7149-T73511) Solution Heat Treated, Stress Relieved By Stretching, and Overaged |
DEC 2004 / D |
| AMS4017K |
Aluminum Alloy, Sheet and Plate, 2.5mg 0.25cr, (5052-H34), Strain-Hardened, Half-Hard, and Stabilized |
DEC 2004 / K |
| AMS4186C |
Aluminum Alloy, Bars, Rods, and Wire, Rolled Or Cold Finished, 5.6zn 2.5mg 1.6cu 0.23cr, as Fabricated |
NOV 2004 / C |
| AMS4094C |
Aluminum Alloy, Sheet and Plate, Alclad 6.3cu 0.30mn 0.18zr 0.10v 0.06ti Alclad 2219-T81 Sheet Solution Heat Treated, Cold Worked, and Precipitation Heat Treated Alclad 2219-T851 Plate Solution Heat Treated, Stress Relieved and Precipitation Heat Treated |
NOV 2004 / C |
| AMS4095C |
Aluminum Alloy, Sheet and Plate, Alclad 6.3cu 0.30mn 0.18zr 0.10v 0.06ti, Alclad 2219 T31; Sheet, Solution Heat Treated and Cold Worked Alclad 2219-T351; Plate, Solution Heat Treated and Stress Relieved |
NOV 2004 / C |
| AMS4339A |
Aluminum Alloy, Rolled Or Cold Finished Bars and Rods 4.4cu 1.5mg 0.60mn (2024-T-851) Solution Heat Treated, Cold Worked, and Artificially Aged |
OCT 2004 / A |
| AMSQQA200B |
Aluminum Alloys, Bar, Rod, Shapes, Structural Shapes, Tube, and Wire, Extruded: General Specification For |
AUG 2004 / B |
| AMSQQA225B |
Aluminum and Aluminum Alloy, Bar, Rod, Wire, or Special Shapes; Rolled, Drawn, or Cold Finished; General Specification For |
AUG 2004 / B |
| AMSQQA250A |
Aluminum and Aluminum Alloy, Plate and Sheet General Specification For |
AUG 2004 / A |
| AMS2771C |
Heat Treatment of Aluminum Alloy Castings |
JUL 2004 / C |
| AMS4870F |
Aluminum Bronze, Centrifugal and Chill Castings 85cu 11al 3.6fe as Cast |
APR 2004 / F |
| AMS4881C |
Nickel-Aluminum-Bronze, Martensitic, Sand and Centrifugal Castings, 78cu 11al 5.1ni 4.8fe, Quench Hardened and Tempered Annealed |
APR 2004 / C |
| ARP142B |
Assembling of Studs in Aluminum and Magnesium |
FEB 2004 / B |
| AMS4068D |
Aluminum Alloy, Drawn Seamless Tubing 6.3cu 0.30mn 0.18zr 0.10v 0.06ti (2219-T3511) Solution Heat Treated and Stress Relieved By Stretching |
DEC 2003 / D |
| AMS4050H |
Aluminum Alloy, Plate 6.2zn 2.3cu 2.2mg 0.12zr (7050-T7451) Solution Heat Treated, Stress Relieved, and Overaged |
DEC 2003 / H |
| AMS4633A |
Bronze, Aluminum Silicon, Rods, Bars, and Forgings 90cu 7.0al 1.8si Drawn and Stress Relieved (Hr50) |
DEC 2003 / A |
| AMS4309A |
Aluminum Allloy Extrusions 8.6Fe - 1.8Si - 1.3V (8009-H112) Powder Metallurgy Product, Strain-Hardened (NONCURRENT Oct 2003) |
OCT 2003 / A |
| AMS4066C |
Aluminum Alloy, Drawn, Round Seamless Tubing 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti - (2219-T8511) Solution Heat Treated, Stress Relieved by Stretching and Precipitation Heat Treated |
OCT 2003 / C |
| AMS4164H |
Aluminum Alloy, Extrusions 4.4Cu - 1.5Mg - 0.60Mn (2024-T3510) Stress-Relief Stretched, Unstraightened |
OCT 2003 / H |
| AMS4089D |
Aluminum Alloy, Plate 1.6Cu - 2.2Mg - 0.22Cr - 5.7Zn (7475-T7651) Solution Heat Treated, Stress Relieved by Stretching, and Precipitation Heat Treated |
OCT 2003 / D |
| AMS4308A |
Aluminum Alloy, Sheet 8.6Fe - 1.8Si - 1.3V (8009-H112) Powder Metallurgy Product, Strain Hardened (NONCURRENT Oct 2003) |
OCT 2003 / A |
| AMS4049K |
Aluminum Alloy, Sheet and Plate, Alclad 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075; -T6 Sheet - T651 Plate) Solution and Precipitation Heat Treated |
OCT 2003 / K |
| AMS4278B |
Aluminum Alloy, Alclad Sheet 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075-0) Annealed, Fine Grained |
SEP 2003 / B |
| AMS4243B |
Aluminum Alloy, Alclad Sheet 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (Alclad 7050-T76) Solution Heat Treated and Overaged |
AUG 2003 / B |
| AMS4165H |
Aluminum Alloy, Extrusions 4.4Cu - 1.5Mg - 0.60Mn (2024-T3511) Solution Heat Treated, Stress-Relieved by Stretching, and Straightened |
AUG 2003 / H |
| AMS4153K |
Aluminum Alloy, Extrusions 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6) Solution and Precipitation Heat Treated |
AUG 2003 / K |
| AMS4154N |
Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6) Solution and Precipitation Heat Treated |
AUG 2003 / N |
| AMS4150L |
Aluminum Alloy, Extrusions and Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr - (6061-T6) Solution and Precipitation Heat Treated |
AUG 2003 / L |
| AMS4108F |
Aluminum Alloy, Hand Forgings, 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7452) Solution Heat Treated, Compression Stress-Relieved, and Overaged |
AUG 2003 / F |
| AMS4319B |
Aluminum Alloy, Rolled or Cold Finished, Bars and Rods 12.2Si - 1.0Mg - 0.90Cu - 0.90Ni (4032-T651) Solution Heat Treated, Stress-Relieved, and Artificially Aged |
AUG 2003 / B |
| AMS4113E |
Aluminum Alloy, Extruded Profiles 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution and Precipitation Heat Treated |
JUL 2003 / E |
| AMS4156K |
Aluminum Alloy, Extrusions 0.68Mg - 0.40Si (6063-T6) Solution and Precipitation Heat Treated |
JUL 2003 / K |
| AMS4173E |
Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T6511) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Precipitation Heat Treated |
JUL 2003 / E |
| AMS4168J |
Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6510) Solution Heat Treated, Stress Relieved by Stretching, and Precipitation Heat Treated, Unstraightened |
JUL 2003 / J |
| AMS4169K |
Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6511) Solution Heat Treated, Stress Relieved by Stretching, Straightened and Precipitation Heat Treated |
JUL 2003 / K |
| AMS4166F |
Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution Heat Treated and Overaged |
JUL 2003 / F |
| AMS4163D |
Aluminum Alloy, Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T3511) Solution Heat Treated, Stress-Relieved by Stretching, and Straightened |
JUL 2003 / D |
| AMS4162D |
Aluminum Alloy, Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T8511) Solution Treated, Stress Relief Stretched, Straightened, and Precipitation Heat Treated |
JUL 2003 / D |
| AMS4159D |
Aluminum Alloy, Extrusions 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T76511) Solution Heat Treated, Stress Relieved, Straightened, and Overaged |
JUL 2003 / D |
| AMS4323B |
Aluminum Alloy, Hand Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7452) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated |
JUL 2003 / B |
| AMS4216B |
Aluminum Alloy, Sheet 1.0Mg - 0.8Si - 0.8Cu - 0.50Mn (6013-T6) Solution Heat Treated and Artificially Aged |
JUL 2003 / B |
| AMS4035K |
Aluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024-0) Annealed |
JUL 2003 / K |
| AMS4037N |
Aluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024; -T3 Flat Sheet, -T351 Plate) Solution Heat Treated |
JUL 2003 / N |
| AMS4201E |
Aluminum Alloy Plate 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7651) Solution Heat Treated, Stress Relieved, and Overaged |
MAY 2003 / E |
| AMS4181C |
Aluminum Alloy, Welding Wire, 7.0Si - 0.38Mg - 0.10Ti (4008 or 356) |
APR 2003 / C |
| AMS2506D |
Coating of Fasteners, Aluminum Filled, Ceramic Bonded Coating |
APR 2003 / D |
| MAM4141B |
Aluminum Alloy, Die Forgings, 5.6zn 2.5mg 1.6cu 0.23cr Solution and Precipitation Heat Treated (Cancelled Mar 2003) |
MAR 2003 / B |
| MAM4131B |
Aluminum Alloy, Die and Hand Forgings 5.6zn 2.5mg 1.6cu 0.23cr Solution Heat Treated and Aged (Cancelled Mar 2003) |
MAR 2003 / B |
| MAM4247B |
Aluminum Alloy, Hand Forgings 7.7zn 2.4mg 1.6cu 0.16cr (7049-T7352) Solution Heat Treated, Stress Relieved By Compression, and Precipitation Heat Treated (Cancelled Mar 2003) |
MAR 2003 / B |
| MAM4248B |
Aluminum Alloy, Hand Forgings and Rolled Rings 1.0mg 0.60si 0.28cu 0.20cr Solution Heat Treated, Stress Relieved By Compression, and Precipitation Heat Treated (Cancelled Mar 2003) |
MAR 2003 / B |
| MAM4323B |
Aluminum Alloy, Hand Forgings, 5.6zn 2.5mg 1.6cu 0.23cr, Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated (Cancelled Mar 2003) |
MAR 2003 / B |
| MAM4208B |
Aluminum Alloy, Sheet, 6.0cu 0.40zr, as Rolled (Cancelled Mar 2003) |
MAR 2003 / B |
| MAM4209B |
Aluminum Alloy, Sheet, Alclad, 6.0cu 0.40zr, as Rolled (Cancelled Mar 2003) |
MAR 2003 / B |
| AMS4233C |
Aluminum Alloy, Welding Wire, 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (201) |
MAR 2003 / C |
| AS1990C |
Aluminum Alloy Tempers |
JAN 2003 / C |
| AMS4205C |
Aluminum Alloy, Plate, 6.2Zn - 1.8Cu - 2.4Mg - 0.13Zr (7010-T73651) or (7010-T7451), Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated |
JAN 2003 / C |
| AMS4204C |
Aluminum Alloy, Plate, 6.2Zn - 1.8Cu - 2.4Mg - 0.13Zr (7010-T7651), Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated |
JAN 2003 / C |
| AMS2420D |
Plating of Aluminum for Solderability, Zinc Immersion Pre-Treatment Process |
DEC 2002 / D |
| AMS2473G |
Chemical Film Treatment for Aluminum Alloys, General Purpose Coating |
OCT 2002 / G |
| AMS4149D |
Aluminum Alloy, Die and Hand Forgings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T74), Solution and Precipitation Heat Treated |
SEP 2002 / D |
| AMS4120R |
Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire, 4.4Cu - 1.5Mg - 0.60Mn (2024), Solution Heat Treated and Naturally Aged (T4), Solution Heat Treated, Cold Worked, and Naturally Aged (T351) |
SEP 2002 / R |
| AMS4179C |
Aluminum Alloy Forgings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T7452), Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated |
AUG 2002 / C |
| AMS4161G |
Aluminum Alloy, Extrusions, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4), Solution Heat Treated and Naturally Aged |
AUG 2002 / G |
| AMS4241C |
Aluminum Alloy Castings, 7.0Si - 0.58Mg - 0.15Ti - 0.06Be (D357.0-T6), Solution and Precipitation Heat Treated, Dendrite Arm Spacing (DAS) Controlled |
JUL 2002 / C |
| AMS4080M |
Aluminum Alloy, Drawn Seamless Tubing, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-0), Annealed |
JUL 2002 / M |
| AMS2436D |
Coating, Aluminum Oxide Detonation Deposition |
JUL 2002 / D |
| AMS4071L |
Aluminum Alloy, Drawn, Round, Seamless Hydraulic Tubing, 2.5Mg - 0.25Cr (5052-0), Annealed |
MAR 2002 / L |
| AMS4195C |
Aluminum Alloy Sheet and Plate, Alclad, 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024 and 1-1/2% Alclad 2024-T861 Flat Sheet; 1-1/2% Alclad 2024-T861 Plate), Solution Heat Treated, Cold Worked, and Precipitation Heat Treated |
JAN 2002 / C |
| MAM2201A |
Tolerances, Metric, Aluminum and Aluminum Alloy Bar, Rod, Wire, and Forging Stock, Rolled, Drawn, Or Cold Finished (Cancelled Jan 2002) |
JAN 2002 / A |
| AMS4219E |
Aluminum Alloy Castings, 7.0Si - 0.55Mg - 0.12Ti - 0.06Be (A357.0 T61P), Solution and Precipitation Heat Treated |
DEC 2001 / E |
| AMS4102G |
Aluminum Alloy, Bars, Rods, and Wire, Rolled Or Cold-Finished 99.0a1, as Fabricated (Cancelled Nov 2001) |
NOV 2001 / G |
| AMS4175C |
Honeycomb Core, Aluminum Alloy, for Sandwich Construction, 5052, 350 (175) (Cancelled Nov 2001) |
NOV 2001 / C |
| AMS4176C |
Honeycomb Core, Aluminum Alloy, for Sandwich Construction, 5056, 350 (175) (Cancelled Nov 2001) |
NOV 2001 / C |
| AMS4266A |
Aluminum Alloy, Sheet, 6.5Fe - 1.3Si - 0.60V (8002-H112), Powder Metallurgy Product, Strain Hardened (NONCURRENT) |
OCT 2001 / A |
| AMS4632E |
Aluminum Bronze Bars and Rods 90cu 8.5al, Hard (Cancelled Oct 2001) |
OCT 2001 / E |
| AMS3126C |
Aluminum Coating Material, Corrosion and Heat Resistant, Thermosetting, Inorganic Binder (NONCURRENT Aug 2001) |
AUG 2001 / C |
| AMS1420B |
Coating Removal Process, Aluminum Alloy Coated Cobalt Alloys (Cancelled Aug 2001) |
AUG 2001 / B |
| AMS4229D |
Aluminum Alloy Castings, High Strength, 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T7) Solution Heat Treated and Overaged |
MAY 2001 / D |
| AMS4232A |
Aluminum Alloy Extrusions, 2.7Cu - 2.2Li - 0.12Zr (2090-T86), Solution Heat Treated, Cold Worked, and Precipitation Heat Treated |
MAY 2001 / A |
| AMS4101C |
Aluminum Alloy, Plate, 4.4Cu - 1.5Mg - 0.60Mn (2124-T851), Solution Heat Treated, Stretched, and Precipitation Heat Treated |
MAY 2001 / C |
| AMS4313C |
Aluminum Alloy, Rolled or Forged Rings, 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T351, 2219-T352) Solution Heat Treated and Mechanically Stress Relieved |
MAY 2001 / C |
| AMS4182F |
Aluminum Alloy, Wire, 5.0Mg - 0.12Mn - 0.12Cr (5056-0), Annealed |
MAY 2001 / F |
| AMS4218H |
Aluminum Alloy Castings, 7.0Si - 0.35Mg (A356.0-T6P) (Formerly T61P Temper), Solution and Precipitation Heat Treated |
APR 2001 / H |
| AMS4040M |
Aluminum Alloy, Alclad Sheet and Plate, 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024 and 1-1/2% Alclad 2024-0), Annealed |
APR 2001 / M |
| AMS2483B |
Blackening Solution For Aluminum Touch-Up Solution |
APR 2001 / B |
| AMS4259A |
Aluminum Alloy, Sheet, 2.4Li - 1.3Cu - 0.95Mg - 0.10Zr (8090-T6), Solution and Precipitation Heat Treated (Unrecrystallized) (NONCURRENT) |
MAR 2001 / A |
| AMS2514A |
Anodic Coating on Aluminum Alloys Sulfuric Acid Process, Resin-Sealed |
MAR 2001 / A |
| AMS2672F |
Brazing, Aluminum Torch or Furnace |
MAR 2001 / F |
| AMS2673D |
Brazing, Aluminum and Aluminum Alloys Molten Flux (Dip) |
MAR 2001 / D |
| AMS2409G |
Plating, Immersion Tin for Aluminum Alloys |
FEB 2001 / G |
| AMS4871F |
Aluminum Bronze, Centrifugal and Chill Castings, 85Cu - 11Al - 3.6Fe, Solution Heat Treated and Tempered |
NOV 2000 / F |
| AMS4083K |
Aluminum Alloy Tubing, Hydraulic, Seamless, Drawn, Round, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6), Solution and Precipitation Heat Treated |
SEP 2000 / K |
| AMS2482C |
Hard Coating Treatment of Aluminum Alloys Teflon-Impregnated or Codeposited |
AUG 2000 / C |
| AMS4265A |
Aluminum Alloy, Particulate Reinforced Extrusions 6092/Sic/25p - T6p Solution Heat Treated, Quenched, and Precipitation Heat Treated (Cancelled Jul 2000) |
JUL 2000 / A |
| AMSC5541A |
Chemical Conversion Coatings on Aluminum and Aluminum Alloys (Cancelled Jul 2000) |
JUL 2000 / A |
| AMS4185D |
Filler Metal, Aluminum Brazing 12si (4047) |
JUL 2000 / D |
| AMSH6088C |
Heat Treatment of Aluminum Alloys (Cancelled Jul 2000) |
JUL 2000 / C |
| AMS3807B |
Tape, Aluminum Foil, Sound and Vibration Damping Pressure Sensitive Adhesive |
NOV 1999 / B |
| AMS4007D |
Aluminum Alloy, Foil 4.4cu 1.5mg 0.60mn (Cancelled Aug 1999) |
AUG 1999 / D |
| AMSC7438 |
Core Material, Aluminum, for Sandwich Construction |
JUN 1999 |
| AS7222A |
Aluminum Rivets, Uns A92117 2.5cu 0.3mg (2117-T4) Procurement Specification |
NOV 1998 / A |
| AMSQQA250/4A |
Aluminum Alloy 2024, Plate and Sheet |
SEP 1998 / A |
| AMSQQA225/8A |
Aluminum Alloy 6061, Bar, Rod, Wire, and Special Shapes; Rolled, Drawn, or Cold Finished |
SEP 1998 / A |
| AMSQQA250/5A |
Aluminum Alloy Alclad 2024, Plate and Sheet |
SEP 1998 / A |
| AMSQQA200/15A |
Aluminum Alloy Bar, Rod, and Shapes, Extruded, 7075-T76, Improved Exfoliation Resistance |
SEP 1998 / A |
| AMSQQA225/6A |
Aluminum Alloy, 2024, Bar, Rod, and Wire; Rolled, Drawn, or Cold Finished |
SEP 1998 / A |
| AS6136 |
Conduit, Electrical, Flexible, Shielded, Aluminum Alloy for Aircraft Installations |
AUG 1998 |
| AMSA81596 |
Aluminum Foil for Sandwich Construction |
JUL 1998 |
| AMS2811A |
Identification, Aluminum and Magnesium Alloy Wrought Products (Cancelled May 1998, Superseded by ASTM B 666) |
MAY 1998 / A |
| AMS4261E |
Aluminum Alloy, Castings, Investment, 7.0Si - 0.30Mg (356.0-T51), Precipitation Heat Treated |
APR 1998 / E |
| AMS3673B |
Cloth, Glass, Aluminum Face, Silicone Rubber Back |
OCT 1997 / B |
| AMSQQA250/29 |
Aluminum Alloy 2124, Plate |
AUG 1997 |
| AMSQQA250/30 |
Aluminum Alloy 2219, Plate and Sheet |
AUG 1997 |
| AMSQQA250/12 |
Aluminum Alloy 7075, Plate and Sheet |
AUG 1997 |
| AMSQQA250/3 |
Aluminum Alloy Alclad 2014, Plate and Sheet |
AUG 1997 |
| AMSQQA250/13 |
Aluminum Alloy Alclad 7075, Plate and Sheet |
AUG 1997 |
| AMSQQA200/3 |
Aluminum Alloy 2024, Bar, Rod, Shapes, Tube, and Wire, Extruded |
JUL 1997 |
| AMSQQA200/8 |
Aluminum Alloy 6061, Bar, Rod, Shapes, Tube, and Wire, Extruded |
JUL 1997 |
| AMSQQA200/11 |
Aluminum Alloy 7075, Bar, Rod, Shapes, Tube, and Wire, Extruded |
JUL 1997 |
| AMSQQA225/9 |
Aluminum Alloy 7075, Bar, Rod, Wire, and Special Shapes; Rolled, Drawn, or Cold Finished |
JUL 1997 |
| AMSQQA225/4 |
Aluminum Alloy, 2014, Bar, Rod, Wire and Special Shapes, Rolled, Drawn, or Cold Finished |
JUL 1997 |
| AMSQQA225/5 |
Aluminum Alloy, 2017, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished |
JUL 1997 |
| AS5255 |
Exfoliation Testing of Aluminum (Cancelled Jun 1997) |
JUN 1997 |
| AMS4171C |
Aluminum Alloy Extrusions, 4.3zn 3.3mg 0.60cu 0.20mn 0.18cr (Cancelled Sep 1996) |
SEP 1996 / C |
| AMS4022F |
Aluminum Alloy Sheet and Plate, Alclad, 1.0mg 0.60si 0.28cu 0.20cr (Cancelled Sep 1996) |
SEP 1996 / F |
| AMS4139H |
Aluminum Alloy, Forgings, 5.6zn 2.5mg 1.6cu 0.25cr (Cancelled Sep 1996, Superseded by AMS4126) |
SEP 1996 / H |
| AMS2204H |
Tolerances, Aluminum Alloy Standard Structural Shapes (Cancelled Aug 1996, Superseded by ANSI H35.2) |
AUG 1996 / H |
| AMS2205 |
Tolerances, Aluminum Alloy and Magnesium Alloy Extrusions (Reaffirmed, 1991) (Cancelled and Superseded by ANSI H35.2, Aug 96) |
AUG 1996 |
| AMS2202 |
Tolerances, Aluminum Alloy and Magnesium Alloy Sheet and Plate (Cancelled Aug 1996) |
AUG 1996 |
| AMS4228B |
Aluminum Alloy, Castings, High Strength, 4.5cu 0.70ag 0.30mn 0.25mg 0.25ti, Solution and Precipitation Heat Treated (Cancelled Apr 1996) |
APR 1996 / B |
| AMS4136A |
Aluminum Alloy, Forgings, 4.3zn 3.3mg 0.6cu 0.2mn 0.2cr, Solution and Precipitation Heat Treated, Low Residual Stresses (Cancelled Feb 1996) |
FEB 1996 / A |
| AMS4058E |
Aluminum Alloy, Sheet 4.4mg-0.70mn-0.15cr (5083-373) (Cancelled Feb 1996) |
FEB 1996 / E |
| AMS4057E |
Aluminum Alloy, Sheet 4.4mg-0.70mn-0.15cr (5083-H323) (Cancelled Feb 1996) |
FEB 1996 / E |
| AMS4301C |
Boron-Aluminum Composite Sheet - 50 V/O 5.6b, 2024-0, for Diffusion Bonding (Cancelled Feb 1996) |
FEB 1996 / C |
| AMS4112D |
Aluminum Alloy, Bars, Rods, and Wire 4.4cu 1.5mg 0.60mn Rolled, Drawn, Or Cold Finished (Cancelled Jan 1996, Superseded by AMS4339) |
JAN 1996 / D |
| AMS4014B |
Aluminum Alloy, Plate 4.5cu 0.85si 0.80mn 0.50mg (Cancelled May 1995, Superseded by AMS4029) |
MAY 1995 / B |
| AMS4000E |
Aluminum Sheet and Plate (1060-0) (NONCURRENT) |
MAY 1995 / E |
| AMS4321A |
Aluminum Alloy, Forgings 7.7zn 2.5mg 1.5cu 0.16cr High Temperature Annealed |
JAN 1993 / A |
| AMS4263A |
Aluminum Silicon Bronze Bars, Rods, and Forgings, 90cu 7.0al 1.9si, Drawn and Stress Relieved (Cancelled Jan 1993, Superseded by AMS4633) |
JAN 1993 / A |
| AMS4012F |
Aluminum Sheet, Laminated, Edge Bonded (NONCURRENT) |
AUG 1992 / F |
| ARP4402 |
Eddy Current Inspection of Open Fastener Holes in Aluminum Aircraft Structure |
APR 1992 |
| AS7220 |
Aluminum Rivets, UNS A91100, 99Al (1100-H14) |
OCT 1991 |
| MA2152/1 |
Clamp, Center Mount, Bare Metal, Aluminum, Metric |
APR 1991 |
| MA2153/1 |
Clamp, Loop Type, Bare Metal, Aluminum, Metric |
APR 1991 |
| MA2155/1 |
Clamp, Rectangular Loop, Cushioned, With Wedge, Hydrocarbon Fluid Resistant, Aluminum, Metric |
APR 1991 |
| MA2155/3 |
Clamp, Rectangular Loop, Cushioned, With Wedge, Phosphate Ester Fluid Resistant, Aluminum, Metric |
APR 1991 |
| MAM2202C |
Tolerances, Metric, Aluminum Alloy and Magnesium Alloy Sheet and Plate (Cancelled Jan 1991, Superseded by ANSI H35.2(M)) |
JAN 1991 / C |
| ARP1675 |
Structural Weldbonding of Aluminum Structures |
OCT 1990 |
| ARP1524A |
Surface Preparation and Priming of Aluminum Alloy Parts for High Durability Structural Adhesive Bonding |
OCT 1990 / A |
| AMS3779/2A |
Tape, Adhesive, Pressure-Sensitive, Thermal Radiation Resistant, Aluminum Coated Glass Cloth |
JUL 1990 / A |
| AMS3779/1A |
Tape, Adhesive, Pressure-Sensitive, Thermal Radiation Resistant, Aluminum Foil/Glass Cloth |
JUL 1990 / A |
| AMS4631E |
Aluminum Bronze Rods, Bars and Forgings, 90.5Cu - 7.5Al - 1.9Si, Stress Relieved (NONCURRENT) |
JUL 1989 / E |
| AMS1626B |
Desmutter, Aluminum, Liquid |
JUL 1989 / B |
| AMS1625B |
Desmutter, Aluminum, Powdered |
JUL 1989 / B |
| MAM2204C |
Tolerances, Metric, Aluminum Alloy Standard Structural Shapes (Cancelled Jul 1989, Superseded by ANSI H35.2(M)) |
JUL 1989 / C |
| AMS4018C |
Aluminum Alloy, Sheet and Plate 3.5mg 0.25cr (Cancelled Jan 1989) |
JAN 1989 / C |
| AMS4019B |
Aluminum Alloy, Sheet and Plate 3.5mg 0.25cr (Cancelled Jan 1989) |
JAN 1989 / B |
| AMS4224B |
Aluminum Alloy, Castings, Sand, 4.0cu 2.1ni 2.0mg 0.30cr 0.30mn 0.13ti 0.13v (243.0), Stabilized |
OCT 1987 / B |
| AMS7223A |
Rivets, Aluminum Alloy, 4.5cu 1.5mg 0.6mn (Cancelled Jul 1987) |
JUL 1987 / A |
| MAM2205A |
Tolerances, Metric, Aluminum Alloy and Magnesium Alloy Extrusions (Cancelled Apr 1987, Superseded by ANSI H35.2(M)) |
APR 1987 / A |
| AMS4170 |
Aluminum Alloy, Impact Extrusions 5.6zn 2.5mg 1.6cu 0.25cr (75s-T6) (Cancelled Jan 1987) |
JAN 1987 |
| AMS7294A |
Labels, Aluminum Foil Etched and Enameled (Cancelled Jan 1987) |
JAN 1987 / A |
| AMS5036H |
Steel Sheet and Strip, Aluminum Coated Low Carbon (NONCURRENT) |
OCT 1985 / H |
| ARP1842 |
Surface Preparation for Structural Adhesive Bonding, Aluminum Alloy and Low Alloy Steel Parts |
JUL 1984 |
| AS90A |
Propeller Blades, Aluminum Alloy, Shank Dimensions For (NONCURRENT Feb 1984) |
FEB 1984 / A |
| AMS4061 |
Aluminum Alloy, Sheet and Plate, Alclad 4.5 Cu - 1.5 Mg - 0.60 Mn - (Alclad 2024-T36) Width Over 60 Inches (Cancelled Jul 1981) |
JUL 1981 |
| AMS4074 |
Aluminum Alloy, Sheet and Plate, Alclad 4.5 Cu - 1.5 Mg - 0.60 Mn - (Alclad 2024-T86) Width Over 30 to 48 In., Incl. (Cancelled Jul 1981) |
JUL 1981 |
| AMS4073 |
Aluminum Alloy, Sheet and Plate, Alclad 4.5 Cu - 1.5 Mg - 0.60 Mn - (Alclad 2024-T86) Width Over 30 to 48 In., Incl. (Cancelled Jul 1981) |
JUL 1981 |
| AMS4075 |
Aluminum Alloy, Sheet and Plate, Alclad 4.5 Cu - 1.5 Mg - 0.60 Mn - (Alclad 2024-T86) Width Over 60 In. (Cancelled Jul 1981) |
JUL 1981 |
| AMS4072 |
Aluminum Alloy, Sheet and Plate, Alclad 4.5cu 1.5mg 0.60mn (Alclad 2024-T86) Width 30 In. and Under (Cancelled Jul 1981) |
JUL 1981 |
| AS125251A |
Rivet - 100° Countersunk Head, Aluminum Alloy |
MAY 1974 / A |
| AS125701A |
Rivet - Universal Head, Aluminum Alloy |
MAY 1974 / A |
|
|
