| Number |
Title |
Publication Date / Revision Num |
| J905_200909 |
Fuel Filter Test Methods |
SEP 2009 |
| J516_200909 |
Hydraulic Hose Fittings |
SEP 2009 |
| J1927_200903 |
Cumulative Damage Analysis for Hydraulic Hose Assemblies |
MAR 2009 |
| J1508_200903 |
Hose Clamp Specifications |
MAR 2009 |
| J1273_200902 |
Recommended Practices for Hydraulic Hose Assemblies |
FEB 2009 |
| J30_200812 |
Fuel and Oil Hoses |
DEC 2008 |
| J517_200811 |
Hydraulic Hose |
NOV 2008 |
| J1279_200801 |
Snowmobile Drive Mechanisms |
JAN 2008 |
| J1754/3_200710 |
Hose Assemblies, Hydraulic, J517 100R Series--Part 3: Procurement and Ordering Information |
OCT 2007 |
| J1754/2_200710 |
Hose Assemblies, Rubber, Hydraulic, Steel Wire Reinforced - Part 2: Ordering Information |
OCT 2007 |
| J1754/1_200710 |
Hose Assemblies, Rubber, Hydraulic, Steel Wire Reinforced--Part 1: Procurement Document |
OCT 2007 |
| J2405_200707 |
Low-Permeation Fuel Fill and Vent Tube |
JUL 2007 |
| J1946_200704 |
Companion Flanges, Type A (External Pilot) and Type S (Internal Pilot) |
APR 2007 |
| J2715_200703 |
Gasoline Fuel Injector Spray Measurement and Characterization |
MAR 2007 |
| J1069_200703 |
Oil Change System for Quick Service of Off-Road Self-Propelled Work Machines |
MAR 2007 |
| J1222_200703 |
Speed Control Assurance for Snowmobiles |
MAR 2007 |
| J1945_200608 |
Cross-Tooth Companion Flanges, Type T (Cancelled Aug 2006) |
AUG 2006 |
| J1985_200608 |
Fuel Filter - Initial Single-Pass Efficiency Test Method |
AUG 2006 |
| J20_200606 |
Coolant System Hoses |
JUN 2006 |
| J1468_200604 |
Application Testing of Oil-to-Air Oil Coolers for Heat Transfer Performance |
APR 2006 |
| J1986_200601 |
Balance Weight and Rim Flange Design Specifications, Test Procedures, and Performance Recommendations |
JAN 2006 |
| J1405_200511 |
Optional Test Procedures for Hydraulic Hose Assemblies |
NOV 2005 |
| J1684_200509 |
Test Method for Evaluating the Electrochemical Resistance of Coolant System Hoses and Materials |
SEP 2005 |
| J2414_200506 |
Application Testing of Oil-to-Water Oil Coolers for Heat Transfer Performance |
JUN 2005 |
| J1638_200411 |
Compression Set of Hoses or Solid Discs |
NOV 2004 |
| J1231_200408 |
Formed Tube Ends for Hose Connections and Hose Fittings |
AUG 2004 |
| J2383_200401 |
Air Dryer Installation Procedure |
JAN 2004 |
| J343_200401 |
Test and Test Procedures for SAE 100R Series Hydraulic Hose and Hose Assemblies |
JAN 2004 |
| J609_200307 |
Mounting Flanges and Power Take-Off Shafts for Small Engines |
JUL 2003 |
| J1418_200210 |
Fuel Injection Pumps--High Pressure Pipes (Tubing) for Testing |
OCT 2002 |
| J1669/2_200210 |
SAE Passenger Compartment Air Filter Test Code--Test Method for Gas Removing Filters (Cancelled Oct 2002, Superseded by ISO TR 11155-2) |
OCT 2002 |
| J2612_200201 |
Internal Combustion Engines -- Piston Vocabulary |
JAN 2002 |
| J637_200112 |
Automotive V-Belt Drives |
DEC 2001 |
| J636_200112 |
V-Belts and Pulleys |
DEC 2001 |
| J1459_200109 |
V-Ribbed Belts and Pulleys |
SEP 2001 |
| J624_200107 |
Tapped and Flanged Exhaust Connections for Small Engines (Cancelled Jul 2001) |
JUL 2001 |
| J1610_200106 |
Test Method for Evaluating the Sealing Capability of Hose Connectionswith a PVT Test Facility |
JUN 2001 |
| J548/2_200003 |
Spark Plug Installation Sockets |
MAR 2000 |
| J548/1_200003 |
Spark Plugs |
MAR 2000 |
| J1862_200002 |
Fuel Injection System Fuel Pressure Regulator and Pressure Damper |
FEB 2000 |
| J246_200002 |
Spherical and Flanged Sleeve (Compression) Tube Fittings |
FEB 2000 |
| J549_199911 |
Preignition Rating of Spark Plugs |
NOV 1999 |
| J2203_199911 |
SAE 17.6 Cubic Inch Spark Plug Rating Engine |
NOV 1999 |
| J830_199904 |
Fuel Injection Equipment Nomenclature |
APR 1999 |
| J1419_199904 |
Tapers for Shaft Ends and Hubs for Fuel Injection Pumps |
APR 1999 |
| USCAR6 |
Standard for D.C. Brush Motor - Hvac Blowers |
FEB 1999 |
| J2437_199812 |
Air Starter Motor Test Procedure |
DEC 1998 |
| J2162_199803 |
Spark Plug Heat Rating Classifications |
MAR 1998 |
| J2045_199802 |
Performance Requirements for Fuel System Tubing Assemblies |
FEB 1998 |
| J1696_199706 |
Standard Fuel Filter Test Fluid |
JUN 1997 |
| J962_199703 |
Formed Tube Ends for Hose Connections (Cancelled Mar 1997) |
MAR 1997 |
| J92_199505 |
Snowmobile Throttle Control Systems |
MAY 1995 |
| J1172_199305 |
Engine Flywheel Housings With Sealed Flanges |
MAY 1993 |
| J1313_199303 |
Automotive Synchronous Belt Drives |
MAR 1993 |
| J1278_199303 |
Si (Metric) Synchronous Belts and Pulleys |
MAR 1993 |
| J536_199201 |
Hose Clamps (Cancelled Jan 1992) |
JAN 1992 |
| J1596_198906 |
Automotive V-Ribbed Belt Drives and Test Methods |
JUN 1989 |
| J1949_198810 |
Road Vehicles-High Pressure Fuel Injection Pipe End-Connections With 60 Deg Female Cone |
OCT 1988 |
| J896_198305 |
Mounting Flanges for Engine Accessory Drives |
MAY 1983 |
