| Number |
Title |
Publication Date / Revision Num |
| J1611_200903 |
Operator Controls--Horizontal Earthboring Machines |
MAR 2009 |
| J430_200707 |
Mechanical and Chemical Requirements for Nonthreaded Fasteners Carbon Steel Solid Rivets - Inch Series |
JUL 2007 |
| J482_200604 |
Hexagon High Nuts |
APR 2006 |
| J483_200603 |
High and Low Crown (Blind, Acorn) Hex Nuts |
MAR 2006 |
| J1545_200507 |
Instrumental Color Difference Measurement for Exterior Finishes, Textiles and Colored Trim |
JUL 2005 |
| J492_200506 |
Guide for Rivet Selection and Design Consideration |
JUN 2005 |
| USCAR1-1 |
Salt Spray Testing and Evaluation of Fastener Finishes |
MAR 2005 |
| J2596_200410 |
Fastener Part Standard--Tapping Screws and Metallic Drive Screws (Inch Dimensioned) |
OCT 2004 |
| J495_200405 |
Straight Pins (Solid) (Cancelled May 2004) |
MAY 2004 |
| J497_200405 |
Unhardened Ground Dowel Pins (Cancelled May 2004) |
MAY 2004 |
| J496_200404 |
Spring Type Straight Pins (Cancelled Apr 2004) |
APR 2004 |
| J2656_200309 |
Fastener Part Standard - Hexagon Socket, Square Head, and Slotted Headless Set Screws - Inch Dimensioned |
SEP 2003 |
| J2655_200309 |
Fastener Part Standard-Washers and Lock Washers (Inch Dimensioned) |
SEP 2003 |
| J1382_200306 |
Classification, Nomenclature, and Specification Definitionsfor Trenching Machines (Cancelled Jun 2003, Superseded by ISO 13539) |
JUN 2003 |
| J1199_200103 |
Mechanical and Material Requirements for Metric Externally Threaded Steel Fasteners |
MAR 2001 |
| J1102M_200103 |
Mechanical and Material Requirements for Metric Wheel Bolts |
MAR 2001 |
| J1237_200103 |
Metric Thread Rolling Screws |
MAR 2001 |
| J995_199907 |
Mechanical and Material Requirements for Steel Nuts |
JUL 1999 |
| J1262_199907 |
Sound Measurement--Trenching Machines (Cancelled Jul 1999) |
JUL 1999 |
| J1216_199907 |
Test Methods for Metric Threaded Fasteners (Cancelled Jul 1999) |
JUL 1999 |
| J1701_199903 |
Torque-Tension Tightening for Inch Series Fasteners |
MAR 1999 |
| J1200_199805 |
Blind Rivets--Break Mandrel Type |
MAY 1998 |
| J485_199805 |
Holes in Bolt and Screw Shanks and Slots in Nuts for Cotter Pins |
MAY 1998 |
| J238_199805 |
Nut and Conical Spring Washer Assemblies |
MAY 1998 |
| J122_199805 |
Surface Discontinuities on Nuts |
MAY 1998 |
| J174_199805 |
Torque-Tension Test Procedure for Steel Threaded Fasteners--Inch Series |
MAY 1998 |
| J174M_199805 |
Torque-Tension Test Procedure for Steel Threaded Fasteners--Metric Series |
MAY 1998 |
| J2371_199708 |
Clamping Force Test Procedure |
AUG 1997 |
| J121M_199704 |
Decarburization in Hardened and Tempered Metric Threaded Fasteners |
APR 1997 |
| J121_199704 |
Decarburization in Hardened and Tempered Unified Threaded Fasteners |
APR 1997 |
| J1648_199608 |
Protective Coatings for Fasteners |
AUG 1996 |
| J892_199608 |
Push-On Spring Nuts Inch Series-General Specifications |
AUG 1996 |
| J892M_199608 |
Push-On Spring Nuts Metric Series-General Specifications |
AUG 1996 |
| J1053_199608 |
Steel Stamped Nuts of One Pitch Thread Design--Inch Series |
AUG 1996 |
| J1053M_199608 |
Steel Stamped Nuts of One Pitch Thread Design--Metric Series |
AUG 1996 |
| J1701M_199607 |
Torque-Tension Tightening for Metric Series Fasteners |
JUL 1996 |
| J1086_199507 |
Numbering Metals and Alloys |
JUL 1995 |
| J1102_199502 |
Mechanical and Material Requirements for Wheel Bolts |
FEB 1995 |
| J123_199403 |
Surface Discontinuities on Bolts, Screws, and Studs in Fatigue Applications |
MAR 1994 |
| J1033_199304 |
Procedure for Measuring Bore and Face Runout of Flywheels, Flywheel Housings and Flywheel Housing Adapters |
APR 1993 |
| J536_199201 |
Hose Clamps (Cancelled Jan 1992) |
JAN 1992 |
| J811_198108 |
Surface Rolling and Other Methods for Mechanical Prestressing of Metals |
AUG 1981 |
| J499_197510 |
Parallel Side Splines for Soft Broached Holes in Fittings |
OCT 1975 |
| J476_196106 |
Dryseal Pipe Threads |
JUN 1961 |
| J493_196106 |
Rod Ends and Clevis Pins |
JUN 1961 |
