Sort By:
Viewing 41 to 60 of 81
  1. A process where the resulting output cannot be verified by subsequent monitoring or measurement and as a consequence, deficiencies become apparent only after the product is in use or has been delivered. [9116]
  2. Any processes for production and service provision where the resulting output cannot be verified by subsequent monitoring or measurement and, as a consequence, deficiencies become apparent only after the product is in use or the service has been delivered. (9102)
  3. production process in which control is particularly important to Product Quality, and for which the results cannot be fully verified by subsequent inspection or test. [IAQG-history]
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 23 Nov 2016
  1. Those requirements identified by the customer, or determined by the organization, which have high risks of not being met, thus requiring their inclusion in the operational risk management process. Factors used in the determination of special requirements include product or process complexity, past experience, and product or process maturity. Examples of special requirements include performance requirements imposed by the customer that are at the limit of the industry’s capability, or requirements determined by the organization to be at the limit of its technical or process capabilities. [9100]
  2. The definition in 9100 (see clause 3.5) applies with the following clarification for software. Examples of special requirements that may introduce high risk for software include: the introduction of a new compiler, new advanced modeling technique, qualification of tools, specific test equipment capabilities, introduction of a new type of interface, or specific customer technical requirements. These requirements are included in the risk management process. [9115]
  3. Those requirements identified by the customer, or determined by the organization, which have high risks of not being achieved, thus requiring their inclusion in the risk management process. Factors used in the determination of special requirements include product or process complexity, past experience, and product or process maturity. Examples of special requirements include performance requirements imposed by the customer that are at the limit of the industry’s capability, or requirements determined by the organization to be at the limit of its technical or process capabilities (reference 9100 and 9110 standards). [9145]

Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 19 Apr 2017
  1. document stating requirements.
    NOTE 1: A specification can be related to activities (e.g., procedure document, process specification and test specification), or products (e.g., product specification, performance specification and drawing). (ISO 9000:2005) [IAQG-history]
Chinese:
规范
Chinese Taiwan:
規範
Dutch:
Specificatie
French:
spécification
German:
Spezifikation
Hebrew:
מפרט
Indonesian:
spesifikasi
Italian:
specifica
Japanese:
仕様書
Korean:
시방서
Portuguese:
Especificação
Russian:
спецификация, технические требования
Spanish:
especificación
Turkish:
şartname
Created: 11 Jul 2013
Updated: 07 Aug 2013
  1. The division of product either physically or by batch quantity, without affecting the product characteristics or conformity. [9120]
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 14 Nov 2016
  1. See “Process Stability.” [9013]
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 11 Jul 2013
  1. A process which has operated within the established control metric criteria for an acceptable period of time, as established by the organization, and all assignable nonconformity causes have been eliminated via corrective action. [9162]
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 11 Jul 2013
  1. A defined segment of work.
    NOTE: A stage does not imply the use of any specific life cycle model. The term stage is synonymous here with the term phase used in ISO/IEC 12207. [9006]
  2. A defined segment of development. NOTE: A stage does not imply the use of any specific life cycle model. [9005]
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 11 Jul 2013
  1. A party having a right, share, or claim in a system or in its possession of characteristics that meet that party’s needs and expectations [ISO/IEC 15288]. NOTE: Stakeholders include, but are not limited to customers, suppliers, regulatory bodies, and functional organizations or groups involved in product realization. [9115]
  2. Individual or organization having a right, share, claim, or interest in a system or in its possession of characteristics that meet their needs and expectations. Stakeholders include, but are not limited to: customers, suppliers, regulatory bodies, and functional organizations or groups involved in product realization. [9145]

Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 21 Apr 2017
  1. identifying or characterizing mark or impression. Physical device or artifact used to imprint or press an image. Stamps should be unique in shape for each specific activity and should have unique identification for each individual. Can also be the tool to provide the mark or the act of marking. [SCMH Section 3.12]
Chinese:
印章
Chinese Taiwan:
印鑑章
Dutch:
Stempel
French:
tampon
German:
Stempel
Hebrew:
חותמת
Indonesian:
cap
Italian:
timbro
Japanese:
スタンプ
Korean:
인장
Portuguese:
Marcação
Russian:
штамп / клеймо
Spanish:
sello
Turkish:
mühür
Created: 11 Jul 2013
Updated: 14 Feb 2018
  1. process to control the issue and use of stamps. Usually one stamp is allocated to an authorised person who stamps the status of an item after verification. [IAQG-history]
Chinese:
印章控制
Chinese Taiwan:
印鑑章管制
Dutch:
stempelcontrole
French:
Maitrise des marques de contrôle
German:
Stempelüberwachung
Hebrew:
בקרת חותמות
Indonesian:
pengendalian cap
Italian:
controllo timbro
Japanese:
スタンプ管理
Korean:
인장관리
Portuguese:
Controle de marcação
Russian:
управление штампами / клеймами
Spanish:
sello de control
Turkish:
mühür kontrolü
Created: 11 Jul 2013
Updated: 11 Jul 2013
  1. document, established by consensus and approved by a recognized body, that provides rules, guidelines or characteristics for activities or their results, aimed at the achievement of the optimum degree of order for common and repeated use, in a given context.
    NOTE 1: Standards should be based on the consolidated results of science, technology and experience, and aimed at the promotion of optimum community benefits. (adapted from EN 45020:1998) [IAQG-history]
Chinese:
标准
Chinese Taiwan:
標準
Dutch:
Norm
French:
Norme
German:
Norm
Hebrew:
תקן
Indonesian:
standard/baku
Italian:
normale
Japanese:
標準
Korean:
표준
Portuguese:
Norma
Russian:
стандарт
Spanish:
normalización
Turkish:
standart
Created: 11 Jul 2013
Updated: 11 Jul 2013
  1. A part or material that conforms to an established industry or national authority published specification, having all characteristics identified by text description or industry/national/military standard drawing. [9102]
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 23 Nov 2016
  1. A measure of the spread (or dispersion) of the process output that has the same unit of measure as the original observations and the process mean. The square root of the variance in a population. [9013]
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 11 Jul 2013
  1. Parts for which the design, manufacturing, inspection data, and marking requirements necessary to demonstrate conformity to the part are in the public domain and published/established as part of the officially recognized standards. [9145]
  2. Parts for which the design, manufacturing, inspection data, and marking requirements necessary to demonstrate conformity of the part are in the public domain and published or established as part of officially recognized standards. [9107A]
  3. A part manufactured in compliance with an established government or industry-accepted specification that contains design, manufacturing, and uniform identification requirements. The specification must include all information necessary to produce and conform the part, and must be published so that any person/organization may manufacture the part.[9114]
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 14 Feb 2018
1. A product controlled by product standard definition produced by a SDO. The term can apply to hardware (e.g., fasteners, connectors, fittings), materials, coatings, sealants, and products that can have their key characteristics assessed for compliance by product qualification to this standard. This may also apply to products referred to as standard catalogue items, as defined by the 9102 standard. (9133A)
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 03 Jun 2016
Updated: 03 Jun 2016
1. A recognized national or international organization commissioned to develop standards and technical specifications for aerospace applications through the input of industry SMEs to achieve consensus agreement for the product standards developed. (9133A)
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 03 Jun 2016
Updated: 03 Jun 2016

1. The designated leader who manages the function to ensure the coordinated numbering, balloting, and publication of IAQG standards is in line with IAQG Procedure 105.3, "Standards Review, Ballot, and Publication Process". [105.1] [105.2]

Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 14 Feb 2018
Updated: 14 Feb 2018

Evidence provided by the supplier certifying the article conforms to approved data. (9114)

Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:
Ведомость соответствия Подтверждение соответствия одобренным данным, предоставленное поставщиком
Spanish:

Turkish:

Created: 23 Nov 2016
Updated: 18 Feb 2018
  1. Statistical control is achieved when all measurements are from the same probability distribution. Typically, plotted points lie within ±3 sigma control limits calculated from a minimum of 20 subgroups. For low risk applications, this model is used when a minimum of 15 to 20 subgroups plotted within ±3 sigma control limits. See
    “Process Stability.” [9013]
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 11 Jul 2013
  1. A method by which a process is monitored for patterns of variation. The resulting data are analyzed statistically to identify incidents of special causes of variation. [9013]
  2. use of statistically based methods to evaluate a process or its output to achieve or maintain a state of control. [IAQG-history]
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 11 Jul 2013
Viewing 41 to 60 of 81