Sort By:
Viewing 21 to 40 of 556
  1. A documented link between a DO and PO that describes the required co-ordination necessary to ensure airworthiness data and continuing airworthiness matters is satisfactory and meets regulatory authority requirements. [9107A]
Chinese:
特定方案
Chinese Taiwan:
Intentionally Blank
Dutch:
Geschikte/Passende regeling
French:
Agencement approprié
German:
Org. Vereinbarung bzgl. der Übergabe der Entwicklungs- und Herstellverantwortung
Hebrew:
הקשר מתועד
Indonesian:
pengaturan yang memadai
Italian:
accordo appropriato
Japanese:
Intentionally Blank
Korean:
적절한 협약서
Portuguese:
Disposição adequada
Russian:
Соглашение по летной годности
Spanish:
acuerdo apropiado/acuerdo válido
Turkish:
uygun düzen
Created: 11 Jul 2013
Updated: 14 Feb 2018
  1. Designation of the product, part, appliance, etc having design and airworthiness data approval by a regulatory authority for which an article is eligible for installation. [9107A]
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 14 Feb 2018

1. After issuance of the Type Certificate (TC), Supplemental Type Certificate (STC), Parts Manufacturer Approval (PMA), Technical Standard Order (TSO)/Joint Technical Standard Order (JTSO)/European Technical Standard Order (ETSO) Authorization or equivalent by the regulatory authority, design and airworthiness data is defined as "approved". Items manufactured in conformity to this data are eligible to be released using Authorized Release Certificates (ARCs) certifying airworthiness. [9107A]

Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 14 Feb 2018
Updated: 14 Feb 2018
  1. After issue of the TC, STC, PMA, or TSO/JTSO/ETSO Authorization, or equivalent, by the regulatory authority, design data is defined as ‘approved’. Items manufactured in conformity to this data are eligible to be released using authorized release certificates certifying airworthiness. (The Approved Design/Airworthiness Data typically consists of drawings, material specifications, dimensional data, processes, surface treatments, shipping conditions, quality requirements, etc.) [9107]
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 11 Jul 2013
  1. A manufacturer that is responsible for the quality of an article and has obtained the right to use a design from the design approval holder (may be the same entity). This is the holder of a Production Certificate (PC), Approved Production Inspection System (APIS), Parts Manufacturer Approval (PMA), Technical Standard Order (TSO) authorization, Production Organisation Approval (POA), European Technical Standard Order (ETSO) authorisation or other production approval issued by any National Airworthiness Authority. [9114]
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 11 Jul 2013
  1. A package of information in an archive system, consisting of the content information and the associated preservation metadata. [OASIS] [9034]
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 14 Feb 2018
  1. The long-term storage to assure that the software, documents, and life cycle data
    associated with the software product are retrievable. [9005]
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 11 Jul 2013
  1. Infrequently accessed data that is stored on long-term storage media. [9034]
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 11 Jul 2013
  1. Material, part, product, component, assembly, or appliance which is listed by the DO as eligible for installation in a type certificated product or included in the design and airworthiness data approved by the regulatory authority; not inclusive of standard parts. [9107A]
  2. Material, part, product, component, assembly, or appliance which is listed by the Approved Manufacturer as eligible for installation in a type certificated product or included in the design data approved by the regulatory authority, not inclusive of standard parts. [9114]
  3. Material, part, component, assembly, or appliance which is listed by the design organization as eligible for installation in/on the product or included in the design data approved by the authority. (9110) (9120)
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 14 Feb 2018
  1. A systematic process to assess the competence of an AB or a conformity assessment body (e.g., AB, CB, AAB, TPAB) based on defined assessment criteria (see ISO/IEC 17011). (9104/1)(9104/2)
Chinese:
评审
Chinese Taiwan:
評估
Dutch:
Beoordeling/Schatting
French:
processus d' évaluation
German:
Bewertungsprozess
Hebrew:
הערכה/מבדק
Indonesian:
penilaian
Italian:
valutazione
Japanese:
評価
Korean:
심사
Portuguese:
Avaliação
Russian:
оценка
Spanish:
evaluación
Turkish:
değerlendirme
Created: 11 Jul 2013
Updated: 23 Nov 2016
  1. A result from a characteristic or property that is appraised only as to whether it does or does not conform to a given requirement (for example, go/no-go, accept/reject, pass/fail, etc.). [9102]
  2. Qualitative data that counts the presence or absence of a characteristic evaluated to a specified criterion, rather than data from a continuous measurement scale. 
    NOTE: Attribute data is typically measured on a go/no-go, pass/fail, or yes/no basis. [9138]
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 15 Feb 2018
  1. A systematic, independent, and documented process for obtaining audit evidence and evaluating it objectively to determine the extent to which audit criteria are fulfilled. [9104/1] [9104/2]
  2. A periodic review of the repository to verify that the data is secure, uncorrupted, and under configuration control. Audits are performed by an independent party (see definition for “Independence”). [9034]
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 14 Feb 2018
  1. An auditor shall refer to a person that has met the requirements set forth in 9104/1 and this document. [9104/3]
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 17 Jul 2015
  1. A body approved by the IAQG sector that has the primary responsibility for authenticating AQMS auditors, in accordance with specific requirements. [9104/1]
  2. A body recognized by an IAQG sector that has the primary responsibility for certifying or approving persons (i.e., auditors) against specific requirements. [9104/2][9104/3]
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 14 Feb 2018
  1. Document attesting that a product is released for use (e.g., release or return to service) and certifying that the activities performed, and the results achieved, conform to established organization, regulatory, and customer requirements. [9120]
  2. A document whose purpose is to detail an aeronautical product which has been manufactured or maintained, the data to which it conforms or was maintained to, and who manufactured or performed the maintenance on it. In Canada, this document is known as the Transport Canada Authorized Release Certificate - Form One; in the EASA system, it is known as the EASA Form 1; and the Federal Aviation Administration (FAA) equivalent is the FAA Form 8130-3. [9107A]
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 14 Feb 2018
  1. The criteria and conditions for approval holders (applicant, manufacturer, etc.) to maintain revise and make accessible the data for the life span of the product. This includes making available, on a routine basis, data the FAA and NTSB need to accomplish activities such as production inspection, surveillance, design changes, incident investigation, and so forth. [9034]
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 14 Feb 2018
  1. The average quality of outgoing product, after sampling inspection, for a given steady value of incoming product quality. [9138]
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 15 Feb 2018
  1. Maximum AOQ over all possible values of incoming product quality level for a given acceptance sampling plan. [9138]
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 15 Feb 2018
  1. The average number of plotted points on a control chart or the average number of items inspected before a shift in process level can be expected to be signaled (e.g., a point plotting outside the control limits). [9138]
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 15 Feb 2018
  1. A part, an assembly, installation equipment, launch equipment, recovery equipment, or support equipment for an aircraft or aviation weapon system that contains a characteristic which failure, malfunction, or absence of could cause a
    catastrophic or critical failure resulting in the loss of or serious damage to the aircraft or weapon system, an unacceptable risk of personal injury or loss of life, or an un-commanded engine shutdown that jeopardizes safety. [9017]
Chinese:

Chinese Taiwan:

Dutch:

French:

German:

Hebrew:

Indonesian:

Italian:

Japanese:

Korean:

Portuguese:

Russian:

Spanish:

Turkish:

Created: 11 Jul 2013
Updated: 11 Jul 2013
Viewing 21 to 40 of 556