Flight Control Actuation System Considerations on Architecture Design and System Installation C1518

Topics: Quality, Safety & Maintenance

The purpose of this four hour short course is to provide information to understand how is established the basic architecture of a Flight Control Actuation System of a transport airplane, i.e. understanding the rationale for the distribution of the control surfaces, power sources, actuators and computers.

Learning Objectives

By attending this seminar, you will be able to:

  • Understand the Flight Control Actuation System main requirements
  • Identify technical alternatives covering various aspects of Flight Control Actuation System architecture
  • Identify the impact of some installation constraints on Control Actuation System architecture
  • Describe various examples of Flight Control Actuation System architectures

Who Should Attend

This seminar is designed for engineers, executives, and other key personnel with little or no previous flight control knowledge or experience.

You must complete all course contact hours and successfully pass the learning assessment to obtain CEUs.

  • Actuation System Architecture Driving Requirements
    • Certification
    • Particular Risk
    • MMEL requirements
    • Margin on failure probabilities
    • Arbitrary failure conditions to be covered
    • Dissimilarity
  • Actuation System Architecture Design Considerations
    • How many control surfaces
    • Balanced vs unbalanced surfaces
    • Mechanical vs powered system
    • How many power sources
    • Electric vs hydraulic power sources
    • How many actuators per surface
    • Active/active vs active/std-by & double activation
    • EMA vs EHA
    • EBHA vs EHA
    • How many computers
    • Centralized vs distributed electronics
    • COM/MON vs triplex voting
    • Dissimilarity (electronics, power sources, back-up system)
    • Back-up system
  • Pilot Controls
    • Side stick vs control column
    • Active vs passive side stick
  • Considerations On System Installation
    • UERF and System Routing
    • Bird strike and segregation
    • Electric actuator thermal management
    • Fire prevention
    • Lightning Strike
    • Actuator installation configurations
  • Actuation system architecture examples
    • System architecture analysis principle
    • Architecture examples
Dominique van den Bossche

Dominique van den Bossche is presently an independent consultant for European and US flight control actuation companies.  He retired from Airbus in 2009 as the Head of Department in charge of the Primary Flight Control Actuation and Hydraulics Department in the Systems and Integration Tests Center of Competence of the Airbus Engineering organization.  He was responsible for the management of R&T, design, development, validation and in-service engineering support of the Primary Flight Control Actuation, Hydraulic Generation and Hydraulic Distribution equipment, for all Airbus models from A300B to A380, A400M and A350.   Previously at Aerospatiale, Mr. van den Bossche was a development engineer in charge of A300B hydromechanical flight control equipment. He was also involved in the A310, A300-600, ATR42/72 and A320 flight control equipment developments. He was appointed as the Head of the Pilot Controls and Primary Flight Control Actuation Group prior to his appointment to Head of Department.  Holding four patents involving flight control actuation equipment design and application, Mr. van den Bossche has also been recognized with an award by the French Academy of Technology for his achievements on electrohydrostatic actuation technology.  In addition to actively serving on the SAE-A6 Fluid Power, Actuation & Control Technology as Vice-Chairman, his industry service also includes serving on the ISO TC20/ SC10/WG9 Hydraulics & Flight Control Actuation committee and the Mechanical Branch Committee and Hydraulic & Actuation working group of the French Bureau de Normalisation Aronautique. He currently teaches Flight Control Actuation Systems at the Institut Universitaire de Technologie (IUT) in Blagnac, France and on-demand courses for various companies and organizations. Mr. van den Bossche received a Master's Degree in Aeronautics at the French Ecole Nationale Suprieure d' Ingnieurs de Constructions Aronautiques.

Duration: .5 Day
CEUs: .4

Fees: $325.00

This seminar is available for Private Delivery Corporate Learning Engagements only. Request Information »

If paying by any other method or if you have general questions, please contact SAE Customer Service.

Powered by Froala Editor