Browse Learn C1877

AS13002: Qualifying an Alternate Inspection Frequency Plan C1877


AS13002 defines the process for qualifying an Alternate Inspection Frequency Plan for suppliers within the aero-engine sector.  This two-day course will provide common requirements for developing and qualifying an alternate inspection plan, other than 100% inspection of all features.  This course is designed to cover the basic elements of the process to be applied to design characteristics (as defined in AS9102), and parts or inspection processes as defined by the purchaser. Beginning with documentation requisites, it will also cover characteristics and controls definition, data pack preparation, purchaser evaluation and approval, planning execution and monitoring, reaction planning, change control and control types.


Learning Objectives
By attending this seminar, you will be able to identify and explain:
  • Inspection frequency plan terminology
  • Training requirements
  • Inspection frequency requirements
  • Inspection frequency process
  • Control types
  • Required documentation
  • Example plans

Who Should Attend

This course is intended, as stated in AS13002, to meet requirements for personnel developing, qualifying and Implementing Inspection Frequency Plans where characteristics are not 100% inspected.

 



DAY ONE
  • Introduction
    • Scope & purpose of the AS13002 Standard
  • Quality control methods
    • Measurement system analysis (MSA)
    • Inspection plans
    • Characteristics
    • Statistical process control
    • Sampling plans
    • AS9100:2016 Rev. D requirements for release of products and services
  • AS9102 aerospace first article inspection requirements
    • Requirements
    • First article inspection planning
    • Nonconformance handling
    • Evaluation activities
    • Partial/full FAI
    • Documentation
    • Characteristics accountability
    • Record results
DAY TWO
  • Process flow to implement inspection frequency requirements
    • Process flow
    • Pre-requisites
    • Define characteristics and controls
  • Statistical process control
    • Requirements for sampling of variable data
    • Major characteristics
    • Minor features
    • Reduced inspection of variables
  • Software numerical control
  • Die/mold and form tool control
  • Die/mold and form tool control - complex structural castings
  • Process parameter control
    • Prepare data pack
    • Purchaser evaluation and approval
    • Execute plan and monitor
    • Reaction plan
    • Change control
  • Example plan
    • Cast and machined part
Dario Yamamoto

Dario Dario Yamamoto has over 10 years’ experience in the Aerospace and Aviation Industries as a Plant, Engineering and Quality Manager in Aerospace Manufacturing and Aviation Companies. He also has 11 years’ experience in Education as Engineering Program Coordinator, University Professor and Certified Bombardier Aerospace Structural Assemblies Instructor. 

He is a Worldwide AS9100 Lead Aerospace Industry Experience Auditor and a SAE International Instructor for the courses: C1501 Common Training for DPRV Personnel, C1713 Implementation of an Internal Audit Program, C1877 Developing and Qualifying an Alternate Inspection Plan per AS13002, C1878 MSA Requirements for the Aero Engine Supply Chain per AS13003 and C1917 Requirements for APQP and PPAP per AS9145.

Following experiences with AS9110 Maintenance and AS9100 Manufacturing Aerospace Standards in companies such as Alpha Star Aviation Services (Saudi Arabia), Turborreactores ITR, Ketema Aerospace Mexico and the Aeronautical University in Queretaro (UNAQ), Dario started working as an Auditor conducting 3rd party audits according to the Aerospace Manufacturing Standard; AS9100, Consulting and Instruction while providing services of Gap Analysis; Internal & External Audits; Development and Implementation of Quality Management Systems according to AS9100, AS9110, OHSAS 18001, ISO9001; Development and Implementation of NADCAP Special and Manufacturing Processes; Process Mapping; Root Cause Analysis; 8 Ds and 5 Whys Problem Solution Techniques; Risk Assessment and Quality, Manufacturing, Auditing and Operation Staff Training and Certification.

Dario holds a B.S degree in Metallurgical Chemical Engineering from the National Autonomous University of Mexico (UNAM), is an AS9100:2016 Rev. C Aerospace Industry experienced auditor certified by Probitas Authentication, and an ISO9001:2015 QMS Lead Auditor certified by Exemplar Global.

Hotel & Travel Information

Fees: $1415.00
SAE Members: $1274.00 - $1274.00

1.3 CEUs
You must complete all course contact hours and successfully pass the learning assessment to obtain CEUs.

For additional information, contact SAE Customer Service 1-877-606-7323 (724-776-4970 outside the U.S. and Canada) or at CustomerService@sae.org.

Duration: 2 Days
Upcoming open enrollment dates being scheduled. Please check back.

Corporate Learning Solutions

Private training your team needs – delivered to your location.

Request Information »
X