Certifying an aircraft, part or appliance can be a challenge. The FAA/EASA procedures can be frustrating and a maze of rules, policy and guidance. Understanding the process and procedures can provide you with a competitive edge and reduce your time obtaining a Certification approval. This course provides an overview of the Federal Aviation Administration (FAA) and European Aviation Safety Agency (EASA) policies, guidelines and requirements leading to Type and Supplemental Type airworthiness approvals. This course has a focus on 29.801 Ditching and EASA 29.802 Emergency Flotation.
By attending this seminar, you will be able to:
This course is designed for engineering and certification managers, design engineers, airworthiness and certification engineers, quality assurance inspectors and engineers, program managers, and consultants The course will help newcomers to aircraft certification as well as experienced attendees better understand the certification process and be able to present and negotiate certification matters with the Federal Aviation Administration Aircraft Certification Office.
David Downey is a consultant and trainer in the aviation and defense sectors for Downey Aviation Services. Mr. Downey previously served as President, North America, at Aerosafe Risk Management. Prior to that role he was a Vice President at Bell Helicopter where he was responsible for Systems Engineering, Engineering Operations, Flight Test Operations, Flight Safety, the Bell Organization Delegation Authorization and the Product Safety Board. Prior to joining Bell, Mr. Downey was a member of the FAA Senior Executive Service where he served as the Manager, FAA Rotorcraft Directorate in Fort Worth, Texas. He provided strategic direction on all aspects of rotorcraft and tilt-rotor policy/certification. In this position he was also responsible for all FAA experimental flight test policy, training and administration. He was a Team Leader on the FAA Safer Skies Commercial Aviation safety program. As Co-Chair of the International Helicopter Safety Team, Mr. Downey achieved a 33% reduction in the number of U. S. fatal helicopter accidents. He has FAA engineering and manufacturing experience with engines, propellers, APUs, UAVs and airplanes. He is an FAA DER. He has also worked closely with the NTSB and international Aviation Authorities such as TCCA, EASA, CAAC and ICAO. Mr. Downey began his career as a U. S. Army Pilot. His aviation experience includes over 4000 hours of fixed and rotary wing accident-free flying on 125 different models. He holds an FAA Airline Transport Pilot rating as well as single/multi engine land/seaplane and helicopter commercial pilot, and CFI ground. Mr. Downey is the 2010 Society of Experimental Test Pilots Tony LaVier Flight Safety Award for life time achievement in Flight Safety. A published author and international public speaker on aviation and leadership, Mr. Downey graduated from the University of Tennessee Space Institute with an MS and earned his BS from Embry Riddle Aeronautical University. He is also a graduate of the US Navy Test Pilot School.
SAE Members: $1346.00 - $1346.00
You must complete all course contact hours and successfully pass the learning assessment to obtain CEUs.
For additional information, contact SAE Customer Service 1-877-606-7323 (724-776-4970 outside the U.S. and Canada) or at CustomerService@sae.org.
Private training your team needs – delivered to your location.Request Information »