SAE International Journal of Materials and Manufacturing

Aims and Scope
The SAE International Journal of Materials and Manufacturing publishes peer-reviewed, authoritative, and in-depth research in the areas of materials, design, and manufacturing. In addition to analytical findings, the Journal addresses integration and implementation of scientific and engineering practices that advance the state of the art and benefit society. The Journal is assembled to present and promote wide-ranging research of the following areas:

  • materials—such as materials development, analysis, modeling, and testing (including ferrous/non-ferrous materials, composites, nano-technologies and coatings)
  • design—such as design analysis, modeling, simulations, and optimization (including robust design, durability, reliability, quality, uncertainty, and sustainability)
  • manufacturing—such as manufacturing practices, process, simulations, and methodologies (including forming, joining, assembling, lean manufacturing, and supply chain)

Indexed in
ESCI (Emerging Sources Citation Index, Web of Science)
Engineering Village (Ei Compendex)
Scopus
JSTOR Sustainability Collection

Editor-in-Chief: Dr. Yung-Li Lee
FCA US LLC Technology Center

Dr. Yung-Li Lee is a Senior Technical Fellow in Durability Science & Technology at the FCA US LLC Technology Center in Auburn Hills, Michigan. He has been with Chrysler since 1988, and is responsible for facilitating the development and implementation of state-of-the-art durability technologies for product analysis, testing and designs. He has a BS in Civil Engineering from National Central University in Taiwan, and M.S. and Ph.D. degrees in Structural Engineering from University of Wisconsin-Madison. He is an Adjunct Professor in Mechanical Engineering of the Oakland University in Michigan, where he has been teaching the three different graduate-level fatigue courses since 1997.

Dr. Lee is an Associate Editor of International Journal of Reliability and Safety. He is a member of International Scientific Committee for International Conference on Fatigue Design 2015 and 2017 in Senlis, France. He was the SAE LSG Committee Chairman (2015-2016), the SAE Material Engineering Activities Chairperson (2013-2015), and the SAE Materials Modeling and Testing Committee Chairman (2009-2011). He also served in the SAE Fellow Selection Committee (2013-2016) and in the Speed Mentoring Program in 2016 SAE World Congress. Dr. Lee is a Fellow of Society of Automotive Engineers (SAE). He is also the recipient of 2017 SAE International Leader Citation Award for the recognition of his contributions to the success of SAE International initiatives, 2006 SAE Forrest McFarland award for outstanding service to SAE Engineering Board, and of the 2012 SAE Henry Ford II Distinguished Award for the extraordinary contribution to Automotive Engineering. He has co-authored two fatigue textbooks and published more than 100 peer-reviewed publications. He also received Design for Six Sigma (DFSS) Green Belt and Black Belt Certifications from ASI in 2008 and 2012, respectively.

 

Associate Editors
Beena Anand, DTE Energy, USA
Guofei Chen, United States Steel Automotive Center, USA
Anindya Deb, Indian Institute of Science, India
Yaomin Dong, Kettering University, USA
Ahmed Sherif El-Gizawy, University of Missouri, USA
Randy J. Gu, Oakland University, USA
Huairui (Harry) Guo, Fiat Chrysler Automobiles, USA
Hong-Tae Kang, Ph.D., The University of Michigan-Dearborn, USA
Chien-Shing Lee, Purdue University, USA
Yung-Li Lee, Chrysler Group LLC, USA
Dr. Fan Li, General Motors, USA
Kuang-Jen Liu, Fiat Chrysler Automotive, USA
Y. Charles Lu, University of Kentucky, USA
Aihua (Alan) Luo, The Ohio State University, USA
Behzad Mahmoudi, AISIN Technical Center of America, Inc., USA
Vijaykumar Mannari, Eastern Michigan University, USA
Zissimos Mourelatos, Oakland University, USA
Jwo Pan, University of Michigan, USA
Srikanth Pilla, Clemson University, USA
Steve Pitrof, Inteva Products LLC, USA
Prakash Sathe, Global Management Consultants, USA
Susan Sawyer-Beaulieu, University of Windsor, Canada
Guangtian (Gavin) Song, Ford Motor Company, USA
Herman Tang, Eastern Michigan University, USA
Darryl S. Taylor, Ph.D., The Boeing Company, USA
Ravi Thyagarajan, U.S. Army RDECOM-TARDEC, USA
Tau Tyan, Ford Motor Company, USA
Lianxiang Yang, Oakland University, USA
Ren-Jye Yang, Chung Yuan Christian University, China
Xiaobo Yang, Oshkosh Corp., USA
Jay Zhou, Ford Motor Company, USA
Qian (Beth) Zou, Ph.D., Oakland University, USA

SAE International's scholarly journals welcome authors from industry, academia, and government to submit original research for potential journal publication. Authors are invited to submit review-ready manuscripts featuring a detailed description of the research (including methodology, assumptions, hardware, observations, analysis, and a comparison of results with prior work). Papers that are deemed appropriate will undergo a comprehensive double-blind peer review for potential publication in the Journal.

Indexed in
ESCI (Emerging Sources Citation Index, Web of Science)
Engineering Village (Ei Compendex)
Scopus
JSTOR Sustainability Collection

Aims & Scope

The SAE International Journal of Materials and Manufacturing publishes authoritative and in-depth research in the areas of materials, design, and manufacturing. In addition to analytical findings, the Journal addresses integration and implementation of scientific and engineering practices that advance the state-of-the-art and benefit society. The Journal is assembled to present and promote wide-ranging research of the following areas:

  • Materials: such as materials development, analysis, modeling, testing (this includes ferrous/non-ferrous materials, composites, nano-technologies and coatings)
  • Design: such as design analysis, modeling, simulations, and optimization (includes robust design, durability, reliability, quality, uncertainty, and sustainability)
  • Manufacturing: such as manufacturing practices, process, simulations, and methodologies (including forming, joining, assembling, lean manufacturing, and supply chain)

SAE's scholarly journals are currently running open Calls for Papers which are not subject to deadlines. Submissions will be evaluated throughout the year. Being published in SAE's scholarly journals can raise an author's profile in the automotive, aerospace, or commercial vehicles fields, while contributing to the industry's body of technical knowledge.

Submissions can be uploaded online via Editorial Manager—SAE's submission and peer review system. When uploading your review-ready manuscript, please include paper title, corresponding author name, and contact information. The submission process for this journal Call for Papers is different from that of SAE's events in that SAE's journals are not considering abstracts by themselves, but rather our editors assess whether the complete paper is appropriate for a journal peer review.

Submit your work via Editorial Manager

Have questions about authoring a journal article, or need assistance to begin? Download author instructions and guidelines.

SAE International scholarly journals Mission Statement

Aligning with SAE International’s mission, SAE journals publish state-of-the-art research findings that advance vehicle and system knowledge in a neutral forum for the benefit of society. Each journal serves the needs of academic and industry authors, researchers, and readers in a medium tailored for the discovery, integration, and application of research. Reflecting SAE's commitment to the highest scientific publishing standards, all published articles are rigorously peer reviewed by at least three recognized experts prior to selection by a journal's Editorial Board, and the majority of SAE journals are indexed in the Web of Science, Emerging Sources Citation Index.

SAE MOBILUS

This product is available for a free two-week trial. Take the Free Trial »

Access SAE MOBILUS »

X