Stall Mitigation and Lift Enhancement of NACA 0012 with Triangle-Shaped Surface Protrusion at a Reynolds Number of 10 ⁵ 01-12-02-0007

Transient numerical simulations are conducted over a NACA 0012 airfoil with triangular protrusions at a Reynolds number (Re) of 100000 using the γ-Re_θ transition Shear Stress Transport (SST) turbulence model. Protrusions of heights 0.5%c, 1%c, and 2%c are placed at one of the three locations, viz, the leading edge (LE), 5%c on the suction surface, and 5%c on the pressure surface, while the angle of attack (AOA) is varied between 0° and 20°. Results obtained from the time-averaged solution of the unsteady Navier-Stokes equation indicate that the smaller protrusion placed at 5%c on the suction surface improves the post-stall lift coefficient by up to 59%, without altering the pre-stall characteristics. The improvement in time-averaged lift coefficients comes with enhanced flow unsteadiness due to vigorous vortex shedding. For a given protrusion height, the vortex shedding frequency decreases as the AOA is increased, while the amplitude of fluctuations in lift coefficient increases as the protrusion height is increased or as the AOA is increased. Nevertheless, mitigation of static stall phenomena is observed for most configurations investigated, and this finding can be beneficial for the design of Unmanned Aerial Vehicles (UAVs) and Micro Aerial Vehicles (MAVs). The enhancement in the vortex shedding frequencies due to triangular protrusion can be utilized for Vortex-Induced Vibrations (VIVs)-based energy generators.