Browse Publications Technical Papers 2002-01-2503
2002-07-15

Capillary Limit in a Loop Heat Pipe with Dual Evaporators 2002-01-2503

This paper describes a study on the capillary limit of a loop heat pipe (LHP) with two evaporators and two condensers. Both theoretical analysis and experimental investigation are performed. Experimental tests conducted include heat load to one evaporator only, even heat loads to both evaporators, and uneven heat loads to both evaporators. Test results show that after the capillary limit is exceeded, vapor will penetrate through the wick of the weaker evaporator, and the compensation chamber (CC) of that evaporator will control the loop operating temperature regardless of which CC has been in control prior to the event. Because the evaporator can tolerate vapor bubbles, the loop can continue to work after vapor penetration. As the loop operating temperature increases, the system pressure drop actually decreases due to a decrease in liquid and vapor viscosities. Thus, the loop may reach a new steady state at a higher operating temperature after vapor penetration. Furthermore, this process can be repeated with a modest increase in the heat load each time the capillary limit is exceeded until the evaporator temperature exceeds the maximum allowable value. When the heat load is applied to only one of the evaporators, the capillary limit can be identified by a rapid increase in the operating temperature and in the temperature difference between the evaporator and the CC. However, it is more difficult to identify when the capillary limit is exceeded if the heat load is applied to both evaporators. In all cases, the loop can recover by reducing the heat load to the loop.

SAE MOBILUS

Subscribers can view annotate, and download all of SAE's content. Learn More »

Access SAE MOBILUS »

Members save up to 18% off list price.
Login to see discount.
Special Offer: Download multiple Technical Papers each year? TechSelect is a cost-effective subscription option to select and download 12-100 full-text Technical Papers per year. Find more information here.
We also recommend:
TECHNICAL PAPER

Thin Copper-Water Heat Pipe Plate for Electronic Cooling

1999-01-2529

View Details

TECHNICAL PAPER

Wick Characterization by Image Analysis

2001-01-2238

View Details

TECHNICAL PAPER

Modeling of a Miniature Loop Heat Pipe with a Flat Evaporator

2002-01-2506

View Details

X