Factors Affecting the Friction Coefficients Between Wooden and Plastic Pallets and the Wooden Floor of a Van-Type Semi-Trailer

Mark G. Strauss; James V. Carnahan; Louis V. Inendino; Rashmi Jayswal; C. Adam Senalik; Ericka J. Southcombe

doi:10.4271/2002-01-3104

2002-11-18

Factors Affecting the Friction Coefficients Between Wooden and Plastic Pallets and the Wooden Floor of a Van-Type Semi-Trailer 2002-01-3104

This paper investigates the coefficients of static and kinetic friction between the hardwood flooring of a used van-type semi-trailer and the bottom surfaces of pallets fabricated from: high-density polyethylene (HDPE), linear low-density polyethylene (LLDPE), oak, or hickory. Tests to determine static and kinetic coefficients of friction (COF) were performed with the pallets moving longitudinally or transversely across the cargo trailer floor, and with varying loads.

Using a general linear model to analyze the data collected, the best estimates of the COF (static, kinetic) for each pallet were found to be: HDPE (0.31, 0.20), LLDPE (0.29, 0.24), hickory (0.32, 0.21), oak (0.35, 0.25). The analysis also showed that pallet load had a small but statistically significant effect on the friction coefficients.

SAE MOBILUS

Subscribers can view annotate, and download all of SAE's content. Learn More »

Access SAE MOBILUS »

Digital $37.00 Print $37.00

Preview Document

We also recommend:

Standards

SAE Mobilus®

Publications

News

Events

Professional Development

A World in Motion (PreK-12)

Participate with SAE

SAE Membership

Donate

Factors Affecting the Friction Coefficients Between Wooden and Plastic Pallets and the Wooden Floor of a Van-Type Semi-Trailer 2002-01-3104

SAE MOBILUS