Real-Time Pass-by Noise Source Identification Using A Beam-Forming Approach

Alun Crewe; Florent Perrin; Vincent Benoit; Karim Haddad

doi:10.4271/2003-01-1537

2003-05-05

Real-Time Pass-by Noise Source Identification Using A Beam-Forming Approach 2003-01-1537

Noise source identification is becoming a key issue in the dimensioning and troubleshooting steps of the design process. In the automotive industry, OEM's and suppliers need to assess the entire description of vehicle noise emission, both for interior comfort and exterior radiation concerns. The resolution of pass-by noise issues pose one of the most significant problems to vehicle designers. While many commercially available systems allow the evaluation of the overall noise emission at any speed and position during the test the task of identifying specific sources is still mainly performed using component masking.

A new measurement technique has been developed using a microphone array (typically 2m × 2m with 64 transducers or more) and acoustic beamforming techniques that allows visual source identification at any point during the test. Typically, the entire side of a vehicle can be evaluated with one single measurement run. This paper describes the method employed and presents results obtained from a high-speed pass-by test on a minivan.

SAE MOBILUS

Subscribers can view annotate, and download all of SAE's content. Learn More »

Access SAE MOBILUS »

Digital $35.00 Print $35.00

Preview Document

We also recommend:

Standards

SAE Mobilus®

Publications

News

Events

Professional Development

A World in Motion (PreK-12)

Participate with SAE

SAE Membership

Donate

Real-Time Pass-by Noise Source Identification Using A Beam-Forming Approach 2003-01-1537

SAE MOBILUS