Cycle-to-Cycle Control of a Dual-Fuel HCCI Engine

Petter Strandh; Johan Bengtsson; Rolf Johansson; Per Tunestål; Bengt Johansson

doi:10.4271/2004-01-0941

2004-03-08

Cycle-to-Cycle Control of a Dual-Fuel HCCI Engine 2004-01-0941

A known problem of the HCCI engine is its lack of direct control and its requirements of feedback control. Today there exists several different means to control an HCCI engine, such as dual fuels, variable valve actuation, inlet temperature and compression ratio. Independent of actuation method a sensor is needed. In this paper we perform closed-loop control based on two different sensors, pressure and ion current sensor. Results showing that they give similar control performance within their operating range are presented.

Also a comparison of two methods of designing HCCI timing controller, manual tuning and model based design is presented. A PID controller is used as an example of a manually tuned controller. A Linear Quadratic Gaussian controller exemplifies model based controller design. The models used in the design were estimated using system identification methods.

The system used in this paper performs control on cycle-to-cycle basis. This leads to fast and robust control. Dual fuels with different octane numbers were used to control the combustion timing.

The engine was a 12 liter 6 cylinder heavy-duty diesel engine modified with a port fuel injection system which has dual fuels connected.

SAE MOBILUS

Subscribers can view annotate, and download all of SAE's content. Learn More »

Access SAE MOBILUS »

Digital $35.00 Print $35.00

Preview Document

We also recommend:

Standards

SAE Mobilus®

Publications

News

Events

Professional Development

A World in Motion (PreK-12)

Participate with SAE

SAE Membership

Donate

Cycle-to-Cycle Control of a Dual-Fuel HCCI Engine 2004-01-0941

SAE MOBILUS