Mechanical-Thermal Simulation of Passenger-Loaded Vehicle Seat in Severe Winter Conditions

E.C. Chan; G. Karimi; D. Rose; J.R. Culham

doi:10.4271/2004-01-1507

2004-03-08

Mechanical-Thermal Simulation of Passenger-Loaded Vehicle Seat in Severe Winter Conditions 2004-01-1507

This paper presents a comprehensive steady-state numerical study for an occupant-loaded vehicle seat with internal heating under severe winter conditions. A participant-based postural study showed that the nominal peak occupant seat pressure was 6kPa on the seat cushion, and 2.5kPa on the backrest. Uni-axial compression tests also indicated non-linear stress-strain behaviors in seating. Using an internally developed 3-D numerical model, it was found that the thermal resistance from contact and clothing was uniform (h_c=144W·K⁻¹·m⁻²) throughout the occupied regions. Their contribution to the overall thermal resistance was relatively minor, however, compared to that of skin (h_overall=27.2W·K⁻¹·m⁻²).

The thermal-mechanical simulations were conducted at heat input levels between 20W and 80W, using I-DEAS 10 and the TMG package as the simulation platform. Comparisons was also made between occupied seat with deflected and non-deflected mesh. The occupant deflection helped reduce the thermal resistance in the occupied region, which resulted in a slight decrease in heater temperature, accompanied by an increase in the average surface temperature, compared to corresponding undeformed results.

SAE MOBILUS

Subscribers can view annotate, and download all of SAE's content. Learn More »

Access SAE MOBILUS »

Digital $37.00 Print $37.00

Preview Document

We also recommend:

Standards

SAE Mobilus®

Publications

News

Events

Professional Development

A World in Motion (PreK-12)

Participate with SAE

SAE Membership

Donate

Mechanical-Thermal Simulation of Passenger-Loaded Vehicle Seat in Severe Winter Conditions 2004-01-1507

SAE MOBILUS