A Study on Engine Valve and Seat Insert Wearing Depending on Speed Change

Keyoung Jin Chun; Jae Soo Hong; Ho Jung Lee; Deog Yeong Kim; Jeoung Kiu IM

doi:10.4271/2004-01-1655

2004-03-08

A Study on Engine Valve and Seat Insert Wearing Depending on Speed Change 2004-01-1655

The minimization of valve and seat insert wear is a critical factor in the pursuit of engine performance improvement. In order to achieve this goal, we have developed a new simulator, which can generate and control high temperatures up to 900°C and various speeds up to 80Hz during motion, just like an actual engine. The wear simulator is considered to be a valid simulation of the engine valve and seat insert wear process with various speeds during engine activity.

The objective of this work focuses on the different degrees of wear from two different test speeds (10Hz & 25Hz). For this study, the temperature of the outer surface of the seat insert was controlled at 3 50°C, the cycle number was 2.1×10⁶, and the test load was 1960N. The wear depth and surface roughness were measured before and after the testing using a confocal laser scanner. It was found that a higher speed (25Hz) causes more wear than a lower speed (10Hz) under identical test conditions (temperature, cycle number and test load). In the wear mechanism, adhesive wear, shear strain and abrasive wear could be observed.

SAE MOBILUS

Subscribers can view annotate, and download all of SAE's content. Learn More »

Access SAE MOBILUS »

Digital $33.00 Print $33.00

Preview Document

We also recommend:

Standards

SAE Mobilus®

Publications

News

Events

Professional Development

A World in Motion (PreK-12)

Participate with SAE

SAE Membership

Donate

A Study on Engine Valve and Seat Insert Wearing Depending on Speed Change 2004-01-1655

SAE MOBILUS