Browse Publications Technical Papers 2005-01-3748

Acquisition of Corresponding Fuel Distribution and Emissions Measurements in HCCI Engines 2005-01-3748

Optical engines are often skip-fired to maintain optical components at acceptable temperatures and to reduce window fouling. Although many different skip-fired sequences are possible, if exhaust emissions data are required, the skip-firing sequence ought to consist of a single fired cycle followed by a series of motored cycles (referred to here as singleton skip-firing). This paper compares a singleton skip-firing sequence with continuous firing at the same inlet conditions, and shows that combustion performance trends with equivalence ratio are similar. However, as expected, reactant temperatures are lower with skip-firing, resulting in retarded combustion phasing, and lower pressures and combustion efficiency. LIF practitioners often employ a homogeneous charge of known composition to create calibration images for converting raw signal to equivalence ratio. Homogeneous in-cylinder mixtures are typically obtained by premixing fuel and air upstream of the engine; however, premixing usually precludes skip-firing. Data are presented demonstrating that using continuously-fired operation to calibrate skip-fired data leads to over-prediction of local equivalence ratio. This is due to a combination of lower reactant temperatures for skip- versus continuous-fired operation, and a fluorescence yield that decreases with temperature. It is further demonstrated that early direct injection can be used as an alternative approach to provide calibration images. The influence of hardware modifications made to optical engines on performance is also examined.


Subscribers can view annotate, and download all of SAE's content. Learn More »


Members save up to 16% off list price.
Login to see discount.
Special Offer: Download multiple Technical Papers each year? TechSelect is a cost-effective subscription option to select and download 12-100 full-text Technical Papers per year. Find more information here.
We also recommend:

Breakup Process of an Initial Spray Injected by a D.I. Gasoline Injector-Simultaneous Measurement of Droplet Size and Velocity by Laser Sheet Image Processing and Particle Tracking Technique


View Details


Optimisation of Image Processing Parameters for Flame Image Velocimetry (FIV) Measurement in a Single-Cylinder, Small-Bore Optical Diesel Engine


View Details


Quantitative Measurement of Droplets and Vapor Concentration Distributions in Diesel Sprays by Processing UV and Visible Images


View Details