Validation of a Seamless Development Process for Real-time ECUs using OSEK-OS Based SILS/RCP 2008-01-0803
An efficient development environments such as Software-in-the-Loop Simulation (SILS) and Rapid Control Prototyping (RCP) have been widely used to reduce the development time and cost of real-time ECUs. However, conventional SILS does not consider temporal behaviors caused by computation time, task scheduling, network-induced delays, and so on. As a result, the control performance of ECU is likely to be degraded after implementation. To overcome this problem, SILS/RCP which considers the temporal behaviors was suggested in the previous research. In this study, we validated the proposed SILS/RCP environments which are used to design an Electronic Stability Control (ESC) system which is one of the hard real-time control systems. The proposed SILS/RCP environments make it possible to realize ECUs in the early design phase by considering temporal behaviors.
Citation: Lee, M., Han, J., Ma, J., Youn, J. et al., "Validation of a Seamless Development Process for Real-time ECUs using OSEK-OS Based SILS/RCP," SAE Int. J. Passeng. Cars - Electron. Electr. Syst. 1(1):288-295, 2009, https://doi.org/10.4271/2008-01-0803. Download Citation
Distributed Embedded Systems Engineering, 2008-SP-2194, SAE International Journal of Passenger Cars - Electronic and Electrical Systems-V117-7EJ, SAE International Journal of Passenger Cars - Electronic and Electrical Systems-V117-7