Browse Publications Technical Papers 2010-01-0342
2010-04-12

Study of Air Entrainment of Multi-hole Diesel Injection by Particle Image Velocimetry - Effect of Neighboring Jets Interaction and Transient Behavior After End of Injection. 2010-01-0342

The air entrainment of multi-hole diesel injection is investigated by high speed Particle Image Velocimetry (PIV) using a multi-hole common rail injector with an injection pressure of 100 MPa. The sprays are observed in a high pressure, high temperature cell that reproduces the thermodynamic conditions which exist in the combustion chamber of a diesel engine during injection. Typical ambient temperature of 800K and ambient density of 25 kg/m3 are chosen. The air entrainment is studied with the PIV technique, giving access to the velocity fields in the surrounding air and/or in the interior of two neighboring jets. High acquisition rate of 5000 Hz, corresponding to 200 μs between two consecutive image pairs is obtained by a high-speed camera coupled with a high-speed Nd:YLF laser. The effect of neighboring jets interaction is studied by comparing four injectors with different numbers of holes (4, 6, 8 and 12) with similar static mass flow rate per hole. The results show that both the maximum air entrainment level and the total mass of entrained air are similar for all the injectors, and therefore are not affected by neighboring jets in the conditions studied. However the transient behavior of the air entrainment process is affected when the number of holes is high, hence when two neighboring jets are near (12 holes nozzle): the air entrainment reaches a maximum at later timings compared to the other nozzles. An analysis of the velocity fields between the two jets shows that this result is due to the air flow inertia generated when the two jets are near. The transient behavior after the End Of Injection (EOI) is also studied using the 4-holes injector. The results show a very rapid decrease of the mean axial velocity near the nozzle after the EOI. The air entrainment becomes maximum at a given position and this position propagates downstream towards the jet tip.

SAE MOBILUS

Subscribers can view annotate, and download all of SAE's content. Learn More »

Access SAE MOBILUS »

Members save up to 18% off list price.
Login to see discount.
We also recommend:
TECHNICAL PAPER

Characterization of Methanol and Ethanol Sprays from Different DI Injectors by Using Mie-scattering and Laser Induced Fluorescence at Potential Engine Cold-start Conditions

2010-01-0602

View Details

TECHNICAL PAPER

An Analysis of Droplets and Ambient Air Interaction in a D.I. Gasoline Spray Using LIF-PIV Technique

2002-01-0743

View Details

JOURNAL ARTICLE

Dilution and Injection Pressure Effects on Ignition and Onset of Soot at Threshold-Sooting Conditions by Simultaneous PAH-PLIF and Soot-PLII Imaging in a Heavy Duty Optical Diesel Engine

2019-01-0553

View Details

X