Implementing Detailed Chemistry and In-Cylinder Stratification into 0/1-D IC Engine Cycle Simulation Tools 2011-01-0849
Employing detailed chemistry into modern engine simulation technologies has potential to enhance the robustness and predictive power of such tools. Specifically this means significant advancements in the ability to compute the onset of ignition, low and high temperature heat release, local extinction, knocking, exhaust gas emissions formation etc. resulting in a set of tools which can be employed to carry out virtual engineering studies and add additional insight into common IC engine development activities such as computing IMEP, identifying safe/feasible operating ranges, minimizing exhaust gas emissions and optimizing operating strategy. However the adoption of detailed chemistry comes at a greater computational cost, this paper investigates the means to retain computational robustness and ease of use whist reducing computational timescales.
This paper focuses upon a PDF (Probability Density Function) based model based on the Stochastic Reactor Model (SRM), which has gained increasing attention from academics and industry for its capabilities to account for in-cylinder processes such as chemical kinetics, fuel injection, turbulent mixing, heat transfer etc. whilst retaining in-cylinder stratification of mixture composition (i.e. fuel equivalence ratio) and temperature. Among the techniques considered here are: a standard KIVA 3V simulation, down-sampling from 3D CFD composition-space to stochastic particles using sequential coupling of KIVA 3V and SRM, the use of detailed chemical kinetics within SRM, chemical mechanism reduction, down-sampling of a chemical mixture space within the SRM, and parallelization of chemistry solution within SRM. The experimental engine setup studied is that used by Cao et. al. , employing Premixed Charge Compression Ignition (PCCI), which is a Low Temperature Combustion (LTC) strategy for diesel engines. This paper demonstrates how equivalent results can be achieved with a reduction in computational time from 28 days to 10 minutes. In order to enable engineers to more easily exploit SRM's capabilities in the IC engine development process, it has been coupled with an industry-standard 1D engine cycle simulation tool (Ricardo WAVE) and a working example is presented.
Citation: Coble, A., Smallbone, A., Bhave, A., Mosbach, S. et al., "Implementing Detailed Chemistry and In-Cylinder Stratification into 0/1-D IC Engine Cycle Simulation Tools," SAE Technical Paper 2011-01-0849, 2011, https://doi.org/10.4271/2011-01-0849. Download Citation
Aaron R. Coble, Andrew Smallbone, Amit Bhave, Sebastian Mosbach, Markus Kraft, Patrick Niven, Steven Amphlett
cmcl innovations, Univ. of Cambridge, Ricardo, Inc., Ricardo UK Ltd.
SAE 2011 World Congress & Exhibition
Modeling of SI and Diesel Engines, 2011-SP-2314