Measuring and Comparing Frequency Response Functions of Torque Converter Turbines Submerged in Transmission Fluid 2011-01-1662
When testing dynamic structures, it is important to note that the dynamic system in question may be submerged into a fluid during operation and to properly test the structure under the same condition in order to understand the true dynamic parameters of the system. In this way, the mass and stiffness coupling to the particular fluid, for the case of this study, automatic transmission fluid, may be taken into account. This is especially important in light structures where the coupling between the fluid mass and the structural mass may be great. A structure was tested with a laser vibrometer using several impact methods in open air to determine which impact method would be most suitable for submerged testing. The structure was then submerged in transmission fluid with an accelerometer attached and subsequently tested and compared to the previous results. In addition, two novel means of excitation, by use of a ball bearing impact and by use of a weighted impact rod, will also be discussed and compared.
Citation: Walber, C., Blough, J., Johnson, M., and Anderson, C., "Measuring and Comparing Frequency Response Functions of Torque Converter Turbines Submerged in Transmission Fluid," SAE Technical Paper 2011-01-1662, 2011, https://doi.org/10.4271/2011-01-1662. Download Citation
Chad Walber, Jason R. Blough, Mark Johnson, Carl Anderson