Compressive Behavior of Representative Volume Element Specimens of Lithium-Ion Battery Cells under Different Constrained Conditions 2014-01-1987
The compressive behavior of lithium-iron phosphate battery cells is investigated by conducting in-plane constrained compression tests and out-of-plane compression tests of representative volume element (RVE) specimens. The results for cell RVE specimens under in-plane constrained compression tests without pre-strains and with pre-strains in the out-of-plane direction indicate that the load carrying capacity is characterized by the buckling of cell specimens. As the pre-strain increases, the nominal compressive stress-strain curve becomes higher. The nominal stress-strain curves in the out-of-plane direction were also obtained and used to determine the elastic moduli for the elastic buckling analyses of the cell components in the cell RVE specimens with different pre-strains. Based on the elastic buckling analyses for a beam with different lateral constraints due to different pre-strains in the out-of-plane direction, the number of half waves and the buckling stresses were obtained. The results indicate that the number of half waves and the buckling stress increase as the pre-strain increases. The general trends of the numbers of half waves and the buckling stresses are in agreement with those obtained from experiments.
Citation: Sung, S., Lai, W., Ali, M., Pan, J. et al., "Compressive Behavior of Representative Volume Element Specimens of Lithium-Ion Battery Cells under Different Constrained Conditions," SAE Int. J. Mater. Manf. 7(2):480-487, 2014, https://doi.org/10.4271/2014-01-1987. Download Citation
Shin-Jang Sung, Wei-Jen Lai, Mohammed Yusuf Ali, Jwo Pan, Saeed Barbat
Univ. of Michigan, Ford Motor Co.
SAE 2014 World Congress & Exhibition
SAE International Journal of Materials and Manufacturing-V123-5, SAE International Journal of Materials and Manufacturing-V123-5EJ