Effect of Octane Number Obtained with Different Oxygenated Components on the Engine Performance and Emissions of a Small GDI Engine 2014-32-0038
Great efforts have been paid to improve engine efficiency as well as to reduce the pollutant emissions. The direct injection allows to improve the engine efficiency; on the other hand, the GDI combustion produces larger particle emissions. The properties of fuels play an important role both on engine performance and pollutant emissions. In particular, great attention was paid to the octane number. Oxygenated compounds allow increasing gasoline's octane number and play an important role in PM emission reduction. In this study was analyzed the effect of fuels with different RON and with ethanol and ethers content. The analysis was performed on a small GDI engine. Two operating conditions, representative of the typical EUDC cycle, were investigated. Both the engine performance and the exhaust emissions were evaluated. The gaseous emissions and particle concentration were measured at the exhaust by means of conventional instruments. Particle size distribution function was measured in the range from 5.6 nm to 560 nm by means of an Engine Exhaust Particle Sizer (EEPS). The results point out that the better result in terms of performance and emission reduction was observed for the high RON fuel. The fuels with ethanol as additive show a large fuel consumption and a not valuable effect on exhaust emissions.
Citation: Di Iorio, S., Catapano, F., Sementa, P., Vaglieco, B. et al., "Effect of Octane Number Obtained with Different Oxygenated Components on the Engine Performance and Emissions of a Small GDI Engine," SAE Technical Paper 2014-32-0038, 2014, https://doi.org/10.4271/2014-32-0038. Download Citation
Silvana Di Iorio, Francesco Catapano, Paolo Sementa, Bianca Maria Vaglieco, Salvatore Florio, Elena Rebesco, Pietro Scorletti, Daniele Terna
Istituto Motori CNR, ENI Div. R&M
SAE/JSAE 2014 Small Engine Technology Conference & Exhibition