Simultaneous Control of Combustion Timing and Ignition Delay in Multi-Cylinder Partially Premixed Combustion 2015-24-2424
In low-temperature combustion concepts such as partially premixed combustion, the ignition delay should be large enough in order to ensure sufficient fuel and air mixing before the start of combustion. It is also necessary that the combustion timing is sufficiently well phased for high thermal efficiency.
Since the ignition delay and combustion timing are intimately coupled, the decoupling of these two quantities gives rise to an interesting multiple input, multiple output control problem where the control of the air system and the fuel injection system have to be combined. In a multi-cylinder engine this problem becomes underdetermined or uncontrollable with more outputs than inputs.
This article investigates model-based cycle-to-cycle cylinder-individual closed-loop control of the ignition delay and the combustion phasing in a multi-cylinder heavy-duty DI engine running on a gasoline fuel mixture. The controller design of choice was model predictive control (MPC) which is a suitable design for multiple input/output systems with actuator constraints. Ignition delay and combustion phasing were extracted from cooled in-cylinder pressure sensors and controlled by manipulating injection timings, the gas mixture temperature and exhaust-gas recirculation (EGR) ratio using a dual EGR-path system and a fast thermal-management (FTM) system.
Citation: Ingesson, G., Yin, L., Johansson, R., and Tunestal, P., "Simultaneous Control of Combustion Timing and Ignition Delay in Multi-Cylinder Partially Premixed Combustion," SAE Int. J. Engines 8(5):2089-2098, 2015, https://doi.org/10.4271/2015-24-2424. Download Citation
Gabriel Ingesson, Lianhao Yin, Rolf Johansson, Per Tunestal
12th International Conference on Engines & Vehicles
SAE International Journal of Engines-V124-3, SAE International Journal of Engines-V124-3EJ
Combustion and combustion processes
Subscribers can view annotate, and download all of SAE's content.
Learn More »