Development of Combustion Solution Meeting CPCB II Emission Norms for Medium Duty Diesel Engines with Mechanical Fuel Injection System 2015-26-0030
Indian emission norms for stationary Gensets are upgraded from CPCB I to CPCB II. These new emission norms call for a significant change in emission limits. CPCB II emission norms call for 62% reduction in NOx+HC and 33% reduction in particulates for engines above 75 kW up to 800 kW power range compared to existing CPCB I norms. CPCB II norms are more stringent as compared to European Stage IIIA and CEV BS III.
To meet equivalent emission norms in US and Europe most of the engine manufacturers have used Common Rail Direct Injection (CRDI) or electronic unit injection as the fuel injection technology.
This paper describes mechanical fuel injection solution for meeting CPCB II emission norms on engines between 93 kW up to 552 kW with acceptable fuel consumption values.
The paper presents simulation and experimentation work carried out to achieve the norms for the said power ratings. It describes the optimization strategy for controlling combustion related parameters viz. fuel injection system, air supply system i.e. turbocharger, Piston cavity, Swirl, Valve timing etc. to have a better tradeoff between NOx-PM and NOx-BSFC. With the given solution it is also observed that the part load fuel consumption values obtained are better when compared to the CRDI system.
Citation: Gandhi, N., Gokhale, N., Aghav, Y., and Kumar, M., "Development of Combustion Solution Meeting CPCB II Emission Norms for Medium Duty Diesel Engines with Mechanical Fuel Injection System," SAE Technical Paper 2015-26-0030, 2015, https://doi.org/10.4271/2015-26-0030. Download Citation
Naresh G. Gandhi, Nitin Gokhale, Yogesh Aghav, M N Kumar
Kirloskar Oil Engines Ltd
Symposium on International Automotive Technology 2015