Optimizing the Natural Gas Engine for CO2 reduction 2016-01-0875

With alternative fuels having moved more into market in light of their reduction of emissions of CO2 and other air pollutants, the spark ignited internal combustion engine design has only been affected to small extent. The development of combustion engines running on natural gas or Biogas have been focused to maintain driveability on gasoline, creating a multi fuel platform which does not fully utilise the alternative fuels’ potential. However, optimising these concepts on a fundamental level for gas operation shows a great potential to increase the level of utilisation and effectiveness of the engine and thereby meeting the emissions legislation. The project described in this paper has focused on optimising a combustion concept for CNG combustion on a single cylinder research engine. The ICE’s efficiency at full load and the fuels characteristics, including its knock resistance, is of primary interest - together with part load performance and overall fuel consumption. In the process of increasing the efficiency of the engine the following areas have been of primary interest, increased compression ratio, thermal load at high cylinder pressure and the use of EGR to further increase efficiency. The overall goal in the project was to reduce the CO₂-emissions while maintaining the performance and characteristics of the engine. The ambition is to reduce specific tail-pipe CO₂-emissions in g/kWh by 50% compared to a modern gasoline engine. The goal was close to being reached at 45% reduction at full load and 25-34% on part load. This was done by theoretically downsizing the engine and increasing the specific performance of the engine.