Temperature Oscillations in the Wall of a Cooled Multi Pulsejet Propeller for Aeronautic Propulsion 2016-01-1998
Environmental and economic issues related to the aeronautic transport, with particular reference to the high-speed one are opening new perspectives to pulsejets and derived pulse detonation engines. Their importance relates to high thrust to weight ratio and low cost of manufacturing with very low energy efficiency. This papers presents a preliminary evaluation in the direction of a new family of pulsejets which can be coupled with both an air compression system which is currently in pre-patenting study and a more efficient and enduring valve systems with respect to today ones. This new pulsejet has bee specifically studied to reach three objectives: a better thermodynamic efficiency, a substantial reduction of vibrations by a multi-chamber cooled architecture, a much longer operative life by more affordable valves. Another objective of this research connects directly to the possibility of feeding the pulsejet with hydrogen. This paper after a preliminary analysis of the pulsejet takes into account two necessary stages of this activity with the initial definition of the starting point of this activity, which aim to define an initial thermodynamic balance of a Lenoir cycle and a preliminary but effective estimation of the thermal problem. It analyses the heat transfer process through the wall of the combustion chamber of a pulsejet for aeronautic propulsion. The inside wall is exposed to burning gases with an average temperature of 1500 K, which oscillates with an amplitude 500 k and a frequency of 50 Hz. It has been considered the possibility of using Hydrogen injection to reduce the environmental impacts at the price of introducing a cooling water envelope at an average temperature of 80 °c. The water mass flow to ensure this condition has been evaluated and it has been evaluated both the average temperature profile within the wall and the effects of the oscillations of gas temperature inside the combustion chamber. Obtained results have allowed starting an effective activity through a radically new pulsejet architecture, which is expected to outclass any former pulsejet in term of operative life and of compression ratio with a consequent step increase in terms of thermodynamic efficiency.