Browse Publications Technical Papers 2017-01-1529

Complete Body Aerodynamic Study of three Vehicles 2017-01-1529

Cooling drag, typically known as the difference in drag coefficient between open and closed cooling configurations, has traditionally proven to be a difficult flow phenomenon to predict using computational fluid dynamics. It was seen as an academic yardstick before the advent of grille shutter systems. However, their introduction has increased the need to accurately predict the drag of a vehicle in a variety of different cooling configurations during vehicle development. This currently represents one of the greatest predictive challenges to the automotive industry due to being the net effect of many flow field changes around the vehicle.
A comprehensive study is presented in the paper to discuss the notion of defining cooling drag as a number and to explore its effect on three automotive models with different cooling drag deltas using the commercial CFD solvers; STARCCM+ and Exa PowerFLOW. The notchback DrivAer model with under-hood cooling provides a popular academic benchmark alongside two fully-engineered production cars; a large saloon (Jaguar XJ) and an SUV (Land Rover Range Rover). Initially three levels of spatial discretization were used with three steady-state RANS solvers (k-ε realizable, k-ω SST and Spalart-Allmaras) to ascertain whether previous work using RANS on the large saloon studying cooling flows could be replicated on other vehicle shapes.
For both the full-production vehicles, all three turbulence models were capable of predicting the cooling drag delta within 5 counts (0.005 Cd). However, the DrivAer model was much more sensitive to both changes in turbulence models and mesh sizes. For the SA turbulence model only the drag coefficient was well predicted, for the other two RANS models no amount of grid refinement allowed the models to correctly predict the flow field. It was seen when comparing the k-ε realizable and SA turbulence models the difference in cooling drag was attributed to the rear of the vehicle. This highlighted that despite similar drag values from the cooling package, the cooling deltas were very different, suggesting that cooling drag cannot be thought of as open-closed drag with the addition of drag due to the cooling package.
Further work on the DrivAer model expanded on the RANS simulations utilizing the eddy-resolving methods, IDDES and LBM, as validation cases. Oscillations which were seen in the SA and k-ω SST RANS turbulence models were shown to be of similar levels to those in the transient methods indicating a pseudo-unsteadiness present in the steady-state solvers and the importance of resolving it. Drag and lift coefficient absolute values were compared showing that only the IDDES method with sliding wheels and LBM method could obtain physical results for the majority of the tested criteria.


Subscribers can view annotate, and download all of SAE's content. Learn More »


Members save up to 16% off list price.
Login to see discount.
Special Offer: Download multiple Technical Papers each year? TechSelect is a cost-effective subscription option to select and download 12-100 full-text Technical Papers per year. Find more information here.
We also recommend:

Aerodynamic Investigation of Cooling Drag of a Production Sedan Part 2: CFD Results


View Details


Aerodynamic Investigation of Cooling Drag of a Production Sedan Part 1: Test Results


View Details


On Blockage Effects in Wind Tunnels – A CFD Study


View Details