Chemical Reaction Processes of Fuel Reformation by Diesel Engine Piston Compression of Rich Homogeneous Air-Fuel Mixture 2017-32-0120
To extend the operational range of premixed diesel combustion, fuel reformation by piston induced compression of rich homogeneous air-fuel mixtures was conducted in this study. Reformed gas compositions and chemical processes were first simulated with the chemistry dynamics simulation, CHEMKIN Pro, by changing the intake oxygen content, intake air temperature, and compression ratio. A single cylinder diesel engine was utilized to verify the simulation results. With the simulation and experiments, the characteristics of the reformed gas with respect to the reformer cylinder operating condition were obtained. Further, the thermal decomposition and partial oxidation reaction mechanisms of the fuel in extremely low oxygen concentrations were obtained with the characteristics of the gas production at the various reaction temperatures.
The main reformed products were hydrogen (H2), carbon monoxide (CO), carbon dioxide (CO2), methane (CH4), and ethylene (C2H4) and the results indicated that the reforming depends on the maximum temperature in the cylinder, however, the amount of reformed gas is lower than the values predicted by the CHEMKIN simulation.
Citation: Asai, G., Watanabe, Y., Ishiguro, S., Shibata, G. et al., "Chemical Reaction Processes of Fuel Reformation by Diesel Engine Piston Compression of Rich Homogeneous Air-Fuel Mixture," SAE Int. J. Engines 10(5):2624-2635, 2017. Download Citation
Go Asai, Yusuke Watanabe, Shuntaro Ishiguro, Gen Shibata, Hideyuki Ogawa, Yoshimitsu Kobashi
YANMAR Co., Ltd., Hokkaido University
JSAE/SAE Small Engine Technologies Conference & Exhibition
SAE International Journal of Engines-V126-3EJ