Composite Components for Vehicle Lightweight: Springs, Wishbones, Low-Cost Hydrogen Tanks, Demise of Astronautic Composite Overwrapped Pressure Vessel 2019-01-1276

SARDOU SAS has invented in 1992 composite “C” springs (patented in 1993), these springs where offering a high energy density of 1350 joules per kilogram (compared to 300 for steel springs). This huge energy density means a potential 78% weight savings! But in the last century, weight saving was less important and platform managers were reluctant to use anything other than coil springs. So, in 2002, in order to comply with their wishes, SARDOU SAS invented composite coils springs. Easy to fit in standard suspensions, Composite coils springs are the optimum choice for McPherson-strut suspensions. As weight saving is now mandatory, composite springs, are the best choice for automotive suspensions, offering a 50% weight saving compared to steel. A Joint Venture, between SARDOU and SOGEFI Suspensions SA called S.ARA, was created in 2008 in order to mass produce composite coils springs; the official Start Of Production happen in 2014 for AUDI. This SOP has demonstrated the viability of producing composite springs. This paper describes the benefits of composite springs including the so called ‘C’ springs, it also describes composite wishbone light weighting potential and low-cost mass-produced high-pressure hydrogen tanks.