Prediction of Material Removal Rate in Wire Electrical Discharge Machining of Aluminum Composites for Automotive Components 2020-28-0399
Wire Electrical Discharge Machining (WEDM) is a contemporary approach of material removal which is conceived from the concept of Electrical Discharge Machining process. Wire Spark Erosion Machining which is known as WEDM, predominantly employed for removing material from hard materials and also especially used for making intricate shapes on any electrically conductive work material with irrespective of the hardness. Composite materials offers improved mechanical properties depends upon the constituents to be added. Graphene is identified as outstanding reinforcing element which provide support to enhance the desired properties of aluminium metal matrix composites in a considerable manner. In this present exploration an analysis has been performed on WEDM of Al-GNP composites. Pulse on time (μs), pulse off time (μs) and servo voltage (V) are deemed as input process parameters in this present exploration. Taguchi’s design approach has been adopted for designing and analyzing the experimental runs. An L27 Orthogonal Arrays was employed adopted to conduct the experimental runs. Material removal rate is deemed as desired performance measure which is need to be improved. The influence of process variables on desired performance measures such as material removal rate were analyzed by Taguchi’s single response analysis. The significance of independent process variables on desired performance measure is examined by ANOVA analysis. Multiple regression analysis has been performed for correlating the relationship among the selected input process variable and desired performance measure. The comparison results proved that the values predicted from the developed regression model were closer with the experimental observations.
Citation: Natarajan, M., Joseph Selvi, B., Palampalle, B., and Katta Clement PhD, V., "Prediction of Material Removal Rate in Wire Electrical Discharge Machining of Aluminum Composites for Automotive Components," SAE Technical Paper 2020-28-0399, 2020, https://doi.org/10.4271/2020-28-0399. Download Citation
Manikandan Natarajan, Binoj Joseph Selvi, Bhanu Palampalle, Varaprasad Katta Clement PhD
Sree Vidyanikethan Engineering College
International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility