Rolling Contact Fatigue Test with Large-Sized Specimen

K. Maeda; H. Nakashima; H. Kashimura; N. Tsushima; S. Ito

doi:10.4271/850763

1985-04-01

Rolling Contact Fatigue Test with Large-Sized Specimen 850763

Rolling contact fatigue lives of various steels used for medium- and large-sized bearings were investigated, using Φ60×ι90 specimen. Through hardened steels and induction hardened steels have nearly the same life, while carburized steels have lives about 3 times as long as that of through hardened steels. Since rolling contact fatigue life is affected by the cleanliness most significantly, it is most important to use clean steels for good bearing life. The influence of chemical compositions upon rolling contact fatigue life varied with cooling speed during quenching of the specimen.

Using a steel which has excessively high hardenability for a small-sized bearing leads to a poor rolling contact fatigue life. For a medium or large-sized bearing we have to use a steel which has high hardenability necessary for the thickness of the bearing, but it seems unnecessary to pay close attention to the steel type.

SAE MOBILUS

Subscribers can view annotate, and download all of SAE's content. Learn More »

Access SAE MOBILUS »

Digital $33.00 Print $33.00

Preview Document

We also recommend:

Standards

SAE Mobilus®

Publications

News

Events

Professional Development

A World in Motion (PreK-12)

Participate with SAE

SAE Membership

Donate

Rolling Contact Fatigue Test with Large-Sized Specimen 850763

SAE MOBILUS