Catalytic Effects of Cr2O3 and PSZ on Gas-Phase Ignition Under Diesel Engine Combustion Conditions

Wonnam Lee; Domenic A. Santavicca

doi:10.4271/902084

1990-10-01

Catalytic Effects of Cr2O3 and PSZ on Gas-Phase Ignition Under Diesel Engine Combustion Conditions 902084

The effect of chromium oxide (Cr₂O₃) and partially stabilized zirconia (PSZ) surfaces on the gas-phase ignition of hydrocarbon fuels has been studied in a high pressure chemical flow reactor under low heat-loss Diesel engine simulated conditions. Results are presented for propane and n-hexane fuels at 6 and 10 atmospheres and are compared to previously reported results obtained under similar conditions with platinum surfaces.

Thermal enhancement of the gas-phase reactions, as evidenced by the catalytic production of CO and CO₂, was found to be negligible for both Cr₂O₃ and PSZ, where as significant thermal enhancement was observed with platinum.

Chemical enhancement of the gas-phase ignition reactions, as evidenced by an increase in the production of intermediate hydrocarbons, was observed under fuel rich conditions with both Cr₂O₃ and PSZ. Oxygen was shown to be essential in that no change in the intermediate hydrocarbon concentration was observed under pyrolysis conditions. The relative magnitude of the observed chemical enhancement increases in order from PSZ to Cr₂O₃ to platinum.

These results indicate that in-cylinder Cr₂O₃ and PSZ coatings may have a significant effect on the ignition characteristics of low heat-loss Diesel engines.

SAE MOBILUS

Subscribers can view annotate, and download all of SAE's content. Learn More »

Access SAE MOBILUS »

Digital $37.00 Print $37.00

Preview Document

We also recommend:

Standards

SAE Mobilus®

Publications

News

Events

Professional Development

A World in Motion (PreK-12)

Participate with SAE

SAE Membership

Donate

Catalytic Effects of Cr2O3 and PSZ on Gas-Phase Ignition Under Diesel Engine Combustion Conditions 902084

SAE MOBILUS