Measurement of Reference Dynamic Pressure in Open-Jet Automotive Wind Tunnels

Rudi Kuenstner; Klaus-Rainer Deutenbach; Jorg-Dieter Vagt

doi:10.4271/920344

1992-02-01

Measurement of Reference Dynamic Pressure in Open-Jet Automotive Wind Tunnels 920344

In automotive open-jet wind tunnels reference velocity is usually measured in terms of a static pressure difference between two different cross-sectional areas of the tunnel. Most commonly used are two sections within the nozzle (Method 1: ΔP-Nozzle). Sometimes, the reference velocity is deduced from the static pressure difference between settling chamber and plenum (Method 2: ΔP-Plenum).

Investigations in three full-scale open-jet automotive wind tunnels have clearly shown that determination of reference dynamic pressure according to ΔP-Plenum is physically incorrect. Basically, all aerodynamic coefficients, including drag coefficient, obtained by this method are too low. For test objects like cars and vans it was found that the error Δc_D depends on the test object's drag blockage in an open-jet wind tunnel. On the other hand, correct determination of dynamic pressure according to ΔP-Nozzle for car and van testing requires at least a certain minimum distance from balance center to reference-tap location upstream of the nozzle exit.

SAE MOBILUS

Subscribers can view annotate, and download all of SAE's content. Learn More »

Access SAE MOBILUS »

Digital $35.00 Print $35.00

Preview Document

We also recommend:

Standards

SAE Mobilus®

Publications

News

Events

Professional Development

A World in Motion (PreK-12)

Participate with SAE

SAE Membership

Donate

Measurement of Reference Dynamic Pressure in Open-Jet Automotive Wind Tunnels 920344

SAE MOBILUS