1992-02-01

Observation of High Pressure Fuel Spray with Laser Light Sheet Method 920459

To clarify the detailed structure of high pressure fuel spray, 2-D sectional images of non-evaporating fuel sprays in a high pressure vessel were observed by using the laser light sheet of a copper vapor laser. By this system, many sectional and continuous photographs of the same spray were obtained, and were very effective for the detailed observation of the spray inner structure and its developing process. The spray inner structure was very complicated, and its fuel density distribution was very heterogeneous. And for its developing process, the spray advances straight immediately after injected, then meanders, and deforms into a branch-like structure. Advancing downstream, these branches distribute complicatedly and heterogeneously with low density droplets. The heterogeneity is owing to these branches. And, the developing process is divided into four regions.
Further, the effects of some parameters on this process were investigated. Selected parameters were injection pressure, ambient pressure and nozzle configurations. By changing parameters, the positions of each region and inner behavior scale were changed. And these changed the inner structure considerably. The effects of each parameter were as follows: By increasing injection pressure, the fuel density distribution became more homogeneous even though fine heterogeneity remained. And from the result of image analysis using cross-correlation coefficient of the photographic light intensity, the turbulence intensity in the spray became higher. By decreasing the hole length or diameter of the nozzle, the density distribution became more homogeneous.

SAE MOBILUS

Subscribers can view annotate, and download all of SAE's content. Learn More »

Access SAE MOBILUS »

Members save up to 18% off list price.
Login to see discount.
Special Offer: Download multiple Technical Papers each year? TechSelect is a cost-effective subscription option to select and download 12-100 full-text Technical Papers per year. Find more information here.
We also recommend:
TECHNICAL PAPER

Fuel Distribution and Mixture Formation Inside a Direct Injection SI Engine Investigated by 2D Mie and LIEF Techniques

1999-01-3659

View Details

TECHNICAL PAPER

Investigation of Spray Penetration and Fuel Distribution Inside the Piston Bowl of a 1.9 l DI Diesel Engine Using Two-Dimensional Mie Scattering

922204

View Details

TECHNICAL PAPER

Visualization of the Qualitative Fuel Distribution and Mixture Formation Inside a Transparent GDI Engine with 2D Mie and LIEF Techniques and Comparison to Quantitative Measurements of the Air/Fuel Ratio with 1D Raman Spectroscopy

2000-01-1793

View Details

X