Refine Your Search

Topic

Search Results

Standard

Ethylene Propylene (EPM) Rubber, Phosphate Ester Resistant, 55-65

2019-05-07
WIP
AMS3248D
This specification covers an ethylene propylene (EPM) rubber in the form of sheet, strip, tubing, molded shapes, and extrusions. Primarily for parts, such as gaskets, grommets, and seals requiring resistance to phosphate esters and/or to ozone. Not suitable for use in contact with petroleum base fluids due to excessive swell.
Standard

Silicone Rubber, 1000 Psi (6.89 Mpa) Minimum Tensile Strength, 55-65 Durometer

2019-05-07
WIP
AMS3346H
This specification covers a silicone rubber material that can be used to manufacture product in the form of sheet, strip, tubing, molded shapes, and extrusions. This specification should not be used to address products such as O-rings, compression seals, O-ring cord, and molded-in-place gaskets.
Standard

Elastomer: Silicone Rubber, (VMQ) General Purpose 75 – 85 Durometer Type ‘A’ Hardness

2019-04-05
CURRENT
AMS3305K
This specification covers a silicone (MQ/VMQ) elastomer that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes. This specification should not be used for molded rings, compression seals, O-ring cord, and molded in place gaskets for aeronautical and aerospace applications without complete consideration of the end use prior to the selection of this material.
Standard

Elastomer: Silicone, Rubber (MQ/VMQ) General Purpose 65 – 75 Durometer Type ‘A’ Hardness

2019-04-05
CURRENT
AMS3304J
This specification covers a silicone (MQ/VMQ) elastomer that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes. This specification should not be used for molded rings, compression seals, O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications, AMS7268 should be used.
Standard

Elastomer: Fluorosilicone Rubber (FVMQ) Fuel and Oil Resistant 75 - 85 Durometer Type “A” Hardness For Products in Fuel Systems/Lubricating Oils

2019-02-28
CURRENT
AMS3741
This specification covers a fluorosilicone (FVMQ) elastomer that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes. This specification should not be used for molded rings, compression seals, O-ring cord, and molded in place gaskets for aeronautical and aerospace applications without complete consideration of the end use prior to the selection of this material.
Standard

Elastomer: Silicone Rubber (MQ/VMQ) General Purpose 45 - 55 Durometer Type “A” Hardness

2019-02-28
CURRENT
AMS3302J
This specification covers a silicone (MQ/VMQ) elastomer that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes. This specification should not be used for molded rings, compression seals, O-ring cord, and molded in place gaskets for aeronautical and aerospace applications without complete consideration of the end use prior to the selection of this material.
Standard

Elastomer: Fluorosilicone Rubber (FVMQ) High Temperature, High Modulus, Fuel and Oil Resistant 70 - 80 Shore A Hardness For Products in Fuel Systems/Lubricating Oils

2019-02-27
CURRENT
AMS3327E
This specification covers a fluorosilicone (FVMQ) elastomer that can be used to manufacture product in the form of sheet, strip, and molded shapes. This specification should not be used for molded rings, compression seals, O-ring cord, and molded in place gaskets for aeronautical and aerospace applications without complete consideration of the end use prior to the selection of this material.
Standard

Elastomer: Silicone, Rubber (MQ/VMQ) General Purpose 55 - 65 Durometer Type "A" Hardness

2019-02-27
CURRENT
AMS3303L
This specification covers a silicone (MQ/VMQ) elastomer that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes. This specification should not be used for molded rings, compression seals, O-ring cord, and molded in place gaskets for aeronautical and aerospace applications without complete consideration of the end use prior to the selection of this material.
Standard

Rings, Sealing, Butadiene-Acrylonitrile (Nbr) Rubber Synthetic Lubricant Resistant 67-75

2018-10-09
WIP
AMS7272H
This specification covers a butadiene-acrylonitrile (NBR) rubber in the form of molded rings. These rings have been used typically as sealing rings in contact with diester synthetic lubricants in service up 150 degrees C (302 degrees F), but usage is not limited to such applications. The cross-section of such rings is usually not over 0.275 inch (6.98 mm) in diameter or thickness.
Standard

Rubber: Flourocarbon (FKM), High Temperature/Fluid Resistant, Low Compression Set/ 85 to 95 Hardness, For Seals in Fuel Systems and Specific Engine Oil Systems

2018-10-09
WIP
AMS7259F
This specification covers a fluorocarbon (FKM) rubber in the form of O-rings, O-ring cord, compression seals, and molded-in-place gaskets for aeronautical and aerospace applications. These products have been used typically as sealing rings, compression seals, O-ring cord, and molded-in-place gaskets in contact with air and a wide variety of fuels, lubricants, and specific hydraulic fluids but usage is not limited to such applications. Each application should be considered individually. This class of fluoroelastomers is not recommended for use in high temperature stabilized, “HTS”, engine oils. Each “HTS” oil should be evaluated separately. This fluorocarbon rubber has a typical service temperature range of -20 to +400 °F (-29 to +204 °C) in air.
X