Refine Your Search

Topic

Search Results

Standard

HANDHELD MICROPHONE AND BOOM MICROPHONE

2014-01-15
CURRENT
ARINC538C
This document describes the aircraft industry recommendations for a handheld microphone and boom microphone for use with airborne radio installations. This document, ARINC Characteristic 538C, is in addition to and does not supersede the older ARINC Characteristic 538B: Hand-Held Microphone, dated February 16, 1983.
Standard

HEADING AND ATTITUDE SENSOR

1969-10-15
CURRENT
ARINC569
This standard sets forth the basic requirements for a HAS, introduced as a successor to vertical and directional gyros. Provides roll, pitch and stabilized heading outputs that can serve as primary references for the purpose of both guidance and display.
Standard

MARK 2 AIRCRAFT INTEGRATED DATA SYSTEM (AIDS MARK 2)

1974-12-02
CURRENT
ARINC573-7
This standard provides design guidance for the development and installation of an expandable Flight Data Acquisition and Recording System. The functions defined include flight data acquisition through suitable electrical interfaces, conversion of analog input signals into a standard serial data output and the capability for expansion to permit increased data handling capacity.
Standard

TERRAIN AWARENESS AND WARNING SYSTEM ((TAWS) - ANALOG

2001-12-12
CURRENT
ARINC562
Terrain Awareness and Warning System (TAWS)ý Analog addresses the need for standard TAWS installations in older aircraft that have analog equipment interfaces. The analog unit is intended as a replacement for ARINC Characteristic 594: Ground Proximity Warning System (GPWS) equipment. The document is intended to compliment ARINC Characteristic 762: Terrain Awareness and Warning System (TAWS) for later model aircraft having digital equipment interfaces.
Standard

MARK 3 VHF COMMUNICATIONS TRANSCEIVER

1998-01-30
CURRENT
ARINC566A-9
This standard defines the characteristics of a VHF Communications Transceiver unit capable of providing voice or data communications capability with the ground. Supplement 8 introduces 8.33 kHz channel spacing.
Standard

NAVIGATION SYSTEMS DATABASE

2005-11-23
CURRENT
ARINC424-18
THE CURRENT VERSION OF THIS DOCUMENT IS 424-21. THIS PREVIOUS VERSION IS AVAILABLE FOR YOUR CONVENIENCE. This standard provides a data base comprising standards used for the preparation of a navigation system data base. This data may be used with the operational flight software in a wide range of navigational equipment.
Standard

NAVIGATION SYSTEMS DATABASE

2011-12-05
CURRENT
ARINC424-20
THE CURRENT VERSION OF THIS DOCUMENT IS 424-21. THIS PREVIOUS VERSION IS AVAILABLE FOR YOUR CONVENIENCE. This standard provides a data base comprising standards used for the preparation of a navigation system data base. This data may be used with the operational flight software in a wide range of navigational equipment.
Standard

NAVIGATION SYSTEMS DATABASE

2008-12-19
CURRENT
ARINC424-19
THE CURRENT VERSION OF THIS DOCUMENT IS 424-21. THIS PREVIOUS VERSION IS AVAILABLE FOR YOUR CONVENIENCE. This standard provides a data base comprising standards used for the preparation of a navigation system data base. This data may be used with the operational flight software in a wide range of navigational equipment.
Standard

DIGITAL INFORMATION TRANSFER SYSTEM(DITS) PART1 FUNCTIONAL DESCRIPTION, ELECTRICAL INTERFACES, LABEL ASSIGNMENTS AND WORD FORMATS

1995-10-09
CURRENT
ARINC429P1-18
ARINC 429 defines the most-widely used data transfer method used within and among avionics systems. It specifies the physical data bus, the electrical characteristics, and the data word formats. Supplement is 18 is a routine update that assigns new ARINC 429 labels, equipment IDs, and System Address Labels (SAL). The document is a re-mastering to bring it up-to-date with the latest ARINC Standard formats and styles.
Standard

HEAD-UP DISPLAY (HUD) SYSTEM

2005-07-08
CURRENT
ARINC764
This document defines a Head-Up Display (HUD) system intended for installation in all types of aircraft. It describes the physical form factors, fit dimensions, electrical interface definition and typical HUD functions, including the display of navigation and guidance information in the flight crew's forward field of view. The HUD accomplishes this by projecting images onto a combiner with symbology that conforms to the outside world view. Guidance for HUD architectures include single, twin, dual and HUD integrated with Primary Flight Display (PFD). This document is an practical guide for the design of federated equipment and integrated modular avionics.
Standard

AVIONICS APPLICATION SOFTWARE STANDARD INTERFACE PART 4-SUBSET SERVICES

2012-06-28
CURRENT
ARINC653P4
ARINC Specification 653 Part 4 was prepared to support controllers and relatively simple avionics. Part 4 is true subset of services specified in ARINC 653 Part 1. In the Subset Services, partition scheduling is restricted to only one partition time window within the partition's period. This simplifies the management of process release points. Process management uses a dual-process model with at most two processes within a partition, for example, foreground and background.
Standard

NAVIGATION SYSTEM DATA BASE

2002-08-30
CURRENT
ARINC424-16
THE CURRENT VERSION OF THIS DOCUMENT IS 424-21. THIS PREVIOUS VERSION IS AVAILABLE FOR YOUR CONVENIENCE. This standard provides a data base comprising standards used for the preparation of a navigation system data base. This data may be used with the operational flight software in a wide range of navigational equipment.
Standard

NAVIGATION SYSTEM DATA BASE

2004-08-31
CURRENT
ARINC424-17
THE CURRENT VERSION OF THIS DOCUMENT IS 424-21. THIS PREVIOUS VERSION IS AVAILABLE FOR YOUR CONVENIENCE. This standard provides a data base comprising standards used for the preparation of a navigation system data base. This data may be used with the operational flight software in a wide range of navigational equipment.
Standard

NAVIGATION SYSTEM DATABASE

2018-07-23
CURRENT
ARINC424-22
This standard provides a data base comprising standards used for the preparation of a navigation system data base. This data may be used with the operational flight software in a wide range of navigational equipment.
Standard

NAVIGATION SYSTEMS DATABASE

2016-07-25
CURRENT
ARINC424-21
This standard provides a data base comprising standards used for the preparation of a navigation system data base. This data may be used with the operational flight software in a wide range of navigational equipment.
Standard

CONSIDERATIONS FOR AVIONICS NETWORK DESIGN

1995-10-09
CURRENT
ARINC428
This standard provides the framework for developing a set of requirements for an avionics data bus network. This standard is intended to provide system-level considerations for the development of such a network, which may include a mix of standard data buses and private data buses.
Standard

CABIN EQUIPMENT INTERFACES PART 3 IN-FLIGHT ENTERTAINMENT SYSTEM (IFES) TO AIRCRACT SYSTEM INTERFACES

2010-11-12
CURRENT
ARINC628P3-2
This standard consolidates and defines various interface parameters, except for power, that may be required to support the operation of an IFES on any airplane model. Supplement 2 adds an Ethernet interface between the aircraft Cabin Services System (CSS) and In-Flight Entertainment System. This interface may be used to exchange information between the CSS and The Passenger Service System (PSS), passenger address/entertainment, airplane mode, navigation, and operational data.
Standard

CABIN EQUIPMENT INTERFACES PART 2 CABIN MANAGEMENT AND ENTERTAINMENT SYSTEM - SEAT INTERFACES

2017-07-10
CURRENT
ARINC628P2-9
This document defines standard electrical and mechanical interfaces of the In-Flight Entertainment System (IFES) equipment associated with the seat (including the headphones, passenger control unit, seat video display, personal video player, telephone hand set, and seat electronics box). Supplement 9 updates applicable interfaces for USB 3.1 outlets in passenger seats.
Standard

CABIN EQUIPMENT INTERFACES PART 1 CABIN MANAGEMENT AND ENTERTAINMENT SYSTEM - PERIPHERALS

2005-08-14
CURRENT
ARINC628P1-7
This document defines general system architectural philosophy and specific design guidance for the design and interface of various cabin related equipment. System performance parameters are described for connectors, electrical interfaces, operational mode control/protocols, BITE reporting, reliability, environmental conditions, and software data loading. Supplement 7 defines an IEEE 802.11n compliant Cabin Wireless Access Point (CWAP) suitable for installation a wide variety of cabins. It also provides an update to the digital overhead monitor mounting provisions and connectors for compatibility with the CWAP definition.
Standard

CABIN EQUIPMENT INTERFACES PART 0 CABIN MANAGEMENT AND ENTERTAINMENT SYSTEM - OVERVIEW

2018-08-28
CURRENT
ARINC628P0-4
The purpose of this document is to provide an introduction and overview of the ARINC 628 series of Specifications. ARINC 628 defines equipment and installation standards for cabin equipment, which is generally defined as communication and entertainment equipment designed for passenger use. Part 0 provides the concepts and overview of ARINC 628 and descriptions of each individual part. Appendix B is written in briefing chart format to facilitate the understanding of high-level objectives. Supplement 4 represents a summary of recent changes to Parts 1 through 9 of ARINC Specification 628.
X