Refine Your Search

Search Results

Standard

Stationary Safety Glazing Replacement

2004-05-26
CURRENT
J1556_200405
The intent of this SAE Recommended Practice is to provide guidelines for automotive vehicle glass replacement shops and their personnel in the correct replacement practices, materials, and procedures for stationary safety glazing components. The design of today's automotive vehicles and the development of new technology can directly influence occupant safety and vehicle structural integrity. The correct installation of stationary safety glazing components can contribute directly to occupant safety and structural integrity of the vehicle.
Standard

Stationary Safety Glazing Replacement

1997-07-01
HISTORICAL
J1556_199707
The intent of this SAE Recommended Practice is to provide guidelines for automotive vehicle glass replacement shops and their personnel in the correct replacement practices, materials, and procedures for stationary safety glazing components. The design of today's automotive vehicles and the development of new technology can directly influence occupant safety and vehicle structural integrity. The correct installation of stationary safety glazing components can contribute directly to occupant safety and structural integrity of the vehicle.
Standard

Safety Glazing Materials - Motor Vehicles and Motor Vehicle Equipment

2013-09-23
CURRENT
J674_201309
All safety glazing materials used in motor vehicles and motor vehicle equipment operating on land highways should comply with the requirements of the American National Standard, ANSI/SAE Z-26.1. The American National Standard for Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways—Safety Standard, ANSI/SAE Z-26.1-1996 is the latest complete updated version and is referred to hereafter as “the safety standard.” This SAE Recommended Practice is not intended to preclude references to any governmental law, ordinance, or regulation which might apply to the glazing of motor vehicles and motor vehicle equipment operating on land highways.
Standard

Safety Glazing Materials - Motor Vehicles and Motor Vehicle Equipment

1976-06-01
HISTORICAL
J674A_197606
All glazing materials used in motor vehicles and motor vehicle equipment operating on land highways should comply with the requirements of the American National Standard, ANSI/SAE Z-26.1. The American National Standard for Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways—Safety Code, ANSI/SAE Z-26.1-1990 is the latest complete updated version and is referred to hereafter as "the safety code." This SAE Recommended Practice is not intended to preclude references to any governmental law, ordinance, or regulation which might apply to the glazing of motor vehicles and motor vehicle equipment operating on land highways.
Standard

Safety Glazing Materials-Motor Vehicles and Motor Vehicle Equipment

1997-07-01
HISTORICAL
J674_199707
All glazing materials used in motor vehicles and motor vehicle equipment operating on land highways should comply with the requirements of the American National Standard, ANSI/SAE Z-26.1. The American National Standard for Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways—Safety Code, ANSI/SAE Z-26.1-1990 is the latest complete updated version and is referred to hereafter as "the safety code." This SAE Recommended Practice is not intended to preclude references to any governmental law, ordinance, or regulation which might apply to the glazing of motor vehicles and motor vehicle equipment operating on land highways.
Standard

Safety Glazing Materials-Motor Vehicles and Motor Vehicle Equipment

2005-08-22
HISTORICAL
J674_200508
All glazing materials used in motor vehicles and motor vehicle equipment operating on land highways should comply with the requirements of the American National Standard, ANSI/SAE Z-26.1. The American National Standard for Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways—Safety Code, ANSI/SAE Z-26.1-1990 is the latest complete updated version and is referred to hereafter as "the safety code." This SAE Recommended Practice is not intended to preclude references to any governmental law, ordinance, or regulation which might apply to the glazing of motor vehicles and motor vehicle equipment operating on land highways.
Standard

Safety Glazing Materials-Motor Vehicles and Motor Vehicle Equipment

1990-11-26
HISTORICAL
J674_199011
All glazing materials used in motor vehicles operating on land highways should comply with the requirements of the American National Standard, ANSI/SAE Z-26.1. The American National Standard for Safety Glazing Materials for Glazing Motor Vehicle Equipment Operating on Land Highways—Safety Code, ANSI/SAE Z-26.1-1990 is the latest complete updated version and is referred to hereafter as "the safety code." This SAE Recommended Practice is not intended to preclude references to any governmental law, ordinance, or regulation which might apply to the glazing of motor vehicles operating on land highways.
Standard

Safety Glazing Materials-Motor Vehicles and Motor Vehicle Equipment

1983-11-01
HISTORICAL
J674_198311
All glazing materials used in motor vehicles operating on land highways should comply with the requirements of the American National Standard, ANSI Z-26.1-1977. Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways including its supplement ANSI Z-26.1a-1990 or subsequent revisions. This is referred to hereafter as "the safety code."
Standard

Intrusion Resistance of Safety Glazing Systems for Road Vehicles

2017-12-11
WIP
J2568
This SAE Recommended Practice specifies an intrusion resistance test method for glazing systems installed in motor vehicles. Intrusion resistance performance is determined not solely by the glazing but also by the glazing attachment to the vehicle and by the vehicle structure. Therefore, the glazing/ attachment/vehicle structure must be tested as a single unit. This test determines intrusion resistance only. The test applies to those materials that meet the requirements for use as safety glazing materials as specified in Safety Standard ANSI/SAE Z26.1 or other applicable standards. The test applies to all installation locations.
Standard

Intrusion Resistance of Safety Glazing Systems for Road Vehicles

2003-02-12
HISTORICAL
J2568_200302
This SAE Recommended Practice specifies an intrusion resistance test method for glazing systems installed in motor vehicles. Intrusion resistance performance is determined not solely by the glazing but also by the glazing attachment to the vehicle and by the vehicle structure. Therefore, the glazing/ attachment /vehicle structure must be tested as a single unit. This test determines intrusion resistance only. The test applies to those materials that meet the requirements for use as safety glazing materials as specified in Safety Standard ANSI/SAE Z26.1 or other applicable standards. The test applies to all installation locations.
Standard

Instrusion Resistance of Safety Glazing Systems for Road Vehicles

2001-04-24
HISTORICAL
J2568_200104
This SAE Recommended Practice specifies an intrusion resistance test method for glazing systems installed in motor vehicles. Intrusion resistance performance is determined not solely by the glazing but also by the glazing attachment to the vehicle and by the vehicle structure. Therefore, the glazing/ attachment /vehicle structure must be tested as a single unit. This test determines intrusion resistance only. The test applies to those materials that meet the requirements for use as safety glazing materials as specified in Safety Standard ANSI/SAE Z26.1 or other applicable standards. The test applies to all installation locations.
Standard

Intrusion Resistance of Safety Glazing Systems for Road Vehicles

2011-06-30
CURRENT
J2568_201106
This SAE Recommended Practice specifies an intrusion resistance test method for glazing systems installed in motor vehicles. Intrusion resistance performance is determined not solely by the glazing but also by the glazing attachment to the vehicle and by the vehicle structure. Therefore, the glazing/ attachment/vehicle structure must be tested as a single unit. This test determines intrusion resistance only. The test applies to those materials that meet the requirements for use as safety glazing materials as specified in Safety Standard ANSI/SAE Z26.1 or other applicable standards. The test applies to all installation locations.
Standard

Plastic Motor Vehicle Safety Glazing - Tolerances and Fabrication Details

2019-04-11
CURRENT
J1691_201904
This SAE Recommended Practice is intended to cover plastic safety glazing for use in motor vehicles and motor vehicle equipment. Nominal specifications for thickness, flatness, curvature, size, and fabrication details are presented principally for the guidance of body engineers and designers. For additional information on plastic safety glazing materials for use in motor vehicles and motor vehicle equipment, please refer to SAE J673.
Standard

Plast Motor Vehicle Safety Glazing--Tolerances and Fabrication Details

1997-04-01
HISTORICAL
J1691_199704
This SAE Recommended Practice is intended to cover plastic safety glazing for use in motor vehicles and motor vehicle equipment. Nominal specifications for thickness, flatness, curvature, size, and fabrication details are presented principally for the guidance of body engineers and designers. For additional information on plastic safety glazing materials for use in motor vehicles and motor vehicle equipment, please see SAE J674.
Standard

Plastic Motor Vehicle Safety Glazing—Tolerances and Fabrication Details

2007-02-07
HISTORICAL
J1691_200702
This SAE Recommended Practice is intended to cover plastic safety glazing for use in motor vehicles and motor vehicle equipment. Nominal specifications for thickness, flatness, curvature, size, and fabrication details are presented principally for the guidance of body engineers and designers. For additional information on plastic safety glazing materials for use in motor vehicles and motor vehicle equipment, please see SAE J674.
X