Refine Your Search

Search Results

Standard

Rubber Boots for Drum-Type Hydraulic Brake Wheel Cylinders

2015-12-17
CURRENT
J1604_201512
This SAE Standard covers molded rubber boots used as end closures on drum-type wheel brake actuating cylinders to prevent the entrance of dirt and moisture, which could cause corrosion and otherwise impair wheel brake operation. The document includes performance tests of brake cylinder boots of both plain and insert types under specified conditions and does not include requirements relating to chemical composition, tensile strength, or elongation of the rubber compound. Further, it does not cover the strength of the adhesion of rubber to the insert material where an insert is used. The rubber material used in these boots is classified as suitable for operation in a temperature range of −40 to +120 °C ± 2 °C (−40 to + 248 °F ± 3.6 °F).
Standard

RUBBER BOOTS FOR DRUM-TYPE HYDRAULIC BRAKE WHEEL CYLINDERS

1995-01-01
HISTORICAL
J1604_199501
This SAE Standard covers molded rubber boots used as end closures on drum-type wheel brake actuating cylinders to prevent the entrance of dirt and moisture, which could cause corrosion and otherwise impair wheel brake operation. The document includes performance tests of brake cylinder boots of both plain and insert types under specified conditions and does not include requirements relating to chemical composition, tensile strength, or elongation of the rubber compound. Further, it does not cover the strength of the adhesion of rubber to the insert material where an insert is used. The rubber material used in these boots is classified as suitable for operation in a temperature range of -40 to +120 °C ± 2 °C (-40 to + 248 °F ± 3.6 °F).
Standard

Brake Master Cylinder Reservoir Diaphragm Gasket

2014-11-26
CURRENT
J1605_201411
This SAE Standard covers performance requirements and methods of test for master cylinder reservoir diaphragm gaskets that will provide a functional seal and protection from outside dirt and water.
Standard

Structural Testing of Passenger Car and Truck Disc Brakes

1998-01-01
HISTORICAL
J1713_199801
This SAE Recommended Practice specifies a procedure for determining structural strength and fatigue life of disc-brake caliper assemblies which are satisfactory for vehicle usage. It is applicable to new caliper assemblies which are employed in passenger car and truck brake systems utilizing hydraulic brake fluids. Brake design and vehicle performance requirements are not included. Specification limits are left to the discretion of the responsible manufacturer. This procedure was developed for base brake operation and does not consider some unusual effects of ABS (anti-lock brake system) or traction control systems which may have a significant effect on the caliper. Careful analysis of the particular type ABS and/or traction control should be made and additional tests may be required which are not included in this document.
Standard

Structural Testing of Passenger Car and Truck Disc Brakes

2013-02-13
HISTORICAL
J1713_201302
This SAE Recommended Practices specifies a procedure for determining structural strength and fatigue life of disc-brake caliper assemblies which are satisfactory for vehicle usage. It is applicable to new caliper assemblies which are employed in passenger car and truck brake systems utilizing hydraulic brake fluids. Brake design and vehicle performance requirements are not included. Specification limits are left to the discretion of the responsible manufacturer. This procedure was developed for base brake operation and does not consider some unusual effects of ABS (Anti-Lock-Brake System) or Traction Control systems which may have a significant effect on the caliper. Careful analysis of the particular type ABS and/or Traction Control should be made and additional tests may be required which are not included in this document.
Standard

Structural Testing of Passenger Car and Truck Disc Brakes

2014-11-15
CURRENT
J1713_201411
This SAE Recommended Practices specifies a procedure for determining structural strength and fatigue life of disc-brake caliper assemblies which are satisfactory for vehicle usage. It is applicable to new caliper assemblies which are employed in passenger car and truck brake systems utilizing hydraulic brake fluids. Brake design and vehicle performance requirements are not included. Specification limits are left to the discretion of the responsible manufacturer. This procedure was developed for base brake operation and does not consider some unusual effects of ABS (Anti-Lock-Brake System) or Traction Control systems which may have a significant effect on the caliper. Careful analysis of the particular type ABS and/or Traction Control should be made and additional tests may be required which are not included in this document.
Standard

Structural Testing of Passenger Car and Truck Disc Brakes

2004-06-07
HISTORICAL
J1713_200406
This SAE Recommended Practice specifies a procedure for determining structural strength and fatigue life of disc-brake caliper assemblies which are satisfactory for vehicle usage. It is applicable to new caliper assemblies which are employed in passenger car and truck brake systems utilizing hydraulic brake fluids. Brake design and vehicle performance requirements are not included. Specification limits are left to the discretion of the responsible manufacturer. This procedure was developed for base brake operation and does not consider some unusual effects of ABS (anti-lock brake system) or traction control systems which may have a significant effect on the caliper. Careful analysis of the particular type ABS and/or traction control should be made and additional tests may be required which are not included in this document.
Standard

Vacuum Power Assist Brake Booster Test Procedure

2015-06-30
CURRENT
J1808_201506
This document applies to direct acting vacuum power assist brake boosters only, exclusive of the master cylinder or other brake system prime mover devices for passenger cars and light trucks [4500 kg GVW (10 000 lb)]. It specifies the test procedure to determine minimum performance and durability characteristics.
Standard

Strength and Durability Testing for Automotive Hydraulic Brake Components

2017-03-13
CURRENT
J2995_201703
To assess the strength and durability for hydraulic brake components as a function of test conditions. These conditions may include: braking torque, hill-holding, braking forces, hydraulic pressure, brake temperatures, environmental and corrosion effects, vibration, and time. This RP includes a systematic reference to other test methods and provides new test methods for durability life prediction based on the VDA 311 for operating strength for brake calipers. When using AK load collectives from vehicle testing for life prediction, the nominal vehicle life corresponds to 300000 km. Braking torques and forces take into account inputs from non-ABS, ABS, EPB, and ESC systems. It also applies to gasoline, diesel, hybrid, and electric vehicles. This RP applies to vehicles below 4540 kg of GVWR.
Standard

Materials for Plastic Pistons for Hydraulic Disc Brake Cylinders

2001-05-14
HISTORICAL
J1568_200105
The materials defined by this SAE Standard are glass-fiber-reinforced, mineral-filled phenolic molding compounds suitable for compression molding. Preforms may be radio frequency preheated or screw preheated slugs. Compound for use in hydraulic disc brake caliper pistons.
Standard

Rubber Seals for Hydraulic Disc Brake Cylinders

2008-05-13
HISTORICAL
J1603_200805
This SAE Standard describes the performance and part requirements for elastomeric seals used in highway vehicle disc brake calipers. Seals covered by this specification may be the solid section type (square, rectangular, O-ring, etc.) mounted stationary in the cylinder bore or on the movable piston.
X