Refine Your Search

Topic

Search Results

Standard

Full-Format Printer

2012-07-31
CURRENT
ARP4102/14C
This document recommends criteria for the installation and operation of a printer intended for use by flight crew members on the flight deck. The printer is used to supply the flight crew with hard copies of information that originates from data sources such as FMS, EDMS, ACMS, CMS, and data link. These criteria are in addition to the specifications of the referenced ARINC Characteristic 744A.
Standard

Automatic Braking System (ABS)

2012-07-31
CURRENT
ARP4102/2A
This document recommends design criteria for an Automatic Braking System. The ABS shall enhance braking performance under most aircraft configurations and all runway conditions.
Standard

Flight Deck Environment

2012-07-31
CURRENT
ARP4101/4A
This document is intended to specify the environmental conditions for transport aircraft necessary to permit the crew to perform their duties and functions in comfort, with minimum fatigue and no distraction. Environmental conditions should cause no short or long-term effects deleterious to health or physical well-being, nor significantly impair ability to perform normal or abnormal crew functions.
Standard

Mitigation for Loss-of-Control Accidents in Transport Airplanes

2010-08-12
WIP
ARP6149
Prevention of catastrophic upset mishaps cannot depend solely on recovery training. The proposed document should complement the training initiatives already in place. As a committee dealing with transport human factors and handling qualities, the output must consider both issues. At the same time, we cannot ignore initial and recurrent training issues and the widespread use of ground-based simulators. The plan would follow the approach taken in the 2003 S-7 white paper but would extend the scope to all forms of LOC, not just repeated rudder reversals. As with the white pa-per, the new document would have sections on transport handling qualities, flight control modes, aircraft displays, simulator requirements, and approval for IFR test evaluations as well as covering training issues. This new document would complement, not replace documents such as the Airplane Upset Recovery Training Aid.
Standard

Final Approach Spacing System (FASS)

2005-11-28
CURRENT
ARP5628
This document recommends criteria and requirements for a Final Approach Spacing System (FASS) for transport aircraft. This is an Aerospace Recommended Practice to support the development of a Final Approach Spacing System (FASS) for Approach Spacing for Instrument Approaches (ASIA) operations.
Standard

Airborne Windshear Systems

2002-10-21
CURRENT
ARP4102/11C
This document recommends criteria for Airborne Windshear Systems, including operational objectives, characteristics, and functional requirements. The recommendations in this document apply to transport aircraft, and describe the operational objectives of windshear alerting systems, situational displays, guidance systems, and avoidance/ detection systems.
Standard

Electronic Data Management System (EDMS)

2000-07-01
CURRENT
ARP4102/15A
This SAE Aerospace Recommended Practice (ARP) recommends criteria for an Electronic Data Management System (EDMS) for use on the flight deck of transport aircraft. The EDMS may be the primary, and in some cases sole, on board source of documentation and information for flight operations, engineering, aircraft maintenance, cabin services, and training. This document addresses flight operations applications only. It addresses the requirements for the flight deck characteristics of airborne equipment elements for an Electronic Data Management System (EDMS), but not the ground support system requirements. Development of ground support systems for EDMS will be a significant task, which must take account of the end-user information handing requirements specified here. An Electronic Library System (ELS) is a partial implementation of EDMS, which incorporates only the data storage, retrieval and display functions.
Standard

Airborne Landing Guidance System for Transport Aircraft

2000-06-01
CURRENT
ARP4102/12A
This document specifies requirements for an Airborne Landing Guidance System (ALGS) electronic device. This equipment shall derive relative aircraft position and situation information for flight along precision three-dimensional paths within the appropriate coverage area. The precision three-dimensional path may be an ILS straight-in look-alike path or a complex, curved path. The requirements are applicable to electronic devices capable of receiving signals or other information from one or more sources, including but not limited to ILS, MLS, GNSS, or IRU inputs.
Standard

Full-Format Printer

1998-10-01
HISTORICAL
ARP4102/14A
This document recommends criteria for the installation and operation of a printer on the flight deck, to supply the flight crew with hard copies of information that originates from data sources such as FMS, ELS/EDMS, ACMS, CMS, and Data Link. These criteria are in addition to the specifications of the referenced ARINC Characteristic 744A.
Standard

FLIGHT MANAGEMENT SYSTEM (FMS)

1995-05-01
HISTORICAL
ARP4102/9
This document recommends criteria and requirements for a Flight Management System (FMS) for transport aircraft.
Standard

INTEGRATION PROCEDURES FOR THE INTRODUCTION OF NEW SYSTEMS TO THE COCKPIT

1995-03-01
CURRENT
ARP4927
This SAE Aerospace Recommended Practice (ARP) provides guidance to achieve the optimum integration of new aircraft systems which have an impact on the cockpit layout or crew operating procedures. This process may also be used for modification of existing cockpits.
Standard

Airborne Windshear Systems

1993-06-29
HISTORICAL
ARP4102/11B
This document recommends criteria for Airborne Windshear Systems, including operational objectives, characteristics, and functional requirements. The recommendations of the document apply to transport aircraft, and describe the operational objectives of windshear alerting systems, situational displays, guidance systems, and avoidance/detection systems.
Standard

Flight Envelope Awareness/Protection

1993-06-01
CURRENT
ARP4104/1
This annex recommends additional design objectives applicable when control laws or control characteristics are modified for the purpose of Flight Envelope Awareness/Protection. While only manually controlled flight is addressed, it is assumed that Autoflight, Autothrottle, or Autothrust performance is compatible.
Standard

Crew Rest Facilities

1992-02-28
HISTORICAL
ARP4101/3
This document recommends criteria for the design and installation of flight crew rest facilities on commercial transport aircraft capable of ultra long-range operations with augmented/enlarged crew complement.
Standard

Seats and Restraint Systems for the Flight Deck

1990-03-01
CURRENT
ARP4101/1
This document establishes the minimum requirements for seats and restraint systems for the flight deck. Due to limitations that it would place upon basic aircraft design, it is not considered practical for these requirements to apply fully to the observer seat. However, it is emphasized that every effort should be made to provide the observer seat position with an equivalent level of comfort and safety. This document is also intended to make recommendations for flight crew restraint systems. A properly designed crew restraint system will minimize injury or debilitation during a survivable crash and enable post crash assistance to occupants and escape from the aircraft. Crew member safety is the primary objective, with appropriate provisions for crew comfort taken into consideration. The criteria established herein are designed to standardize restraint systems without hindering the development of new, improved systems.
Standard

AIRBORNE WINDSHEAR SYSTEMS

1989-11-01
HISTORICAL
ARP4102/11A
This document recommends criteria for Airborne Windshear Systems, including operational objectives, characteristics, and functional requirements. The recommendations of this document apply to transport aircraft, and describe the operational objectives of windshear alerting systems, situational displays, guidance systems, and detection/avoidance systems.
X