Refine Your Search

Topic

Search Results

Magazine

Momentum, the Magazine for Student Members of SAE International 2012-08-31

2012-08-31
ETS Baja parts failure analysis: Geared for success When the ETS Baja team had to withdraw from the Baja Auburn 2012 event due to abnormal gear failure, an extensive analysis was required to ensure that problems of this nature would not surface again. After some serious investigation, the conclusion of almost 30 hours of research was unexpected and proved surprisingly simple. Body and soul rule at 2012 Formula SAE Months before the Formula SAE Michigan competition in May, teams were hashing out product development decisions. The end-game was presenting a racecar that had the right stuff for earning high points in the challenge's vehicle design evaluation as well as the acceleration, skid pad, endurance, and autocross dynamic performance events.
Magazine

Momentum, the Magazine for Student Members of SAE International 2012-01-28

2012-01-28
Electrochemical reactions Students from the Department of Automotive Engineering at the NED University of Engineering and Technology build the first onboard fuel-cell vehicle of Pakistan. The Baja balance How to combine heavy homework load with your CDS team responsibilities. Embraer progresses on clean-sheet military program It has been over two years since Embraer announced that it would be developing the KC-390 military airlift and tanker jet under a contract with the Brazilian Air Force (FAB), which established the requirements for the aircraft as it did with other Embraer military programs. Calling all recruiters Lack of response to distributed resumes leaves many wondering, is anyone out there?
Magazine

Momentum, the Magazine for Student Members of SAE International 2011-08-29

2011-08-29
SAE Supermileage champ achieves 2158 mpg Teams of collegiate engineering students show pathways to amazing vehicle fuel efficiency inthe 32nd annual competition, making the top 10 meant beating 500 mpg! Engineer employment study reveals positive hiring trends A recent study from SAE analysts suggests that the future may be looking up for mobility engineers on the job hunt. Oklahoma's active Aero attack Students at the University of Oklahoma have spurred new ideas for aerodynamics development in Formula SAE with their newest wing package. SJSU grad, GM engineer receives Rumbaugh Award Rumbaugh Award recipient Randy Floresca says being involved with SAE was key to securing his current job. Electronics take the lead in the motorcycle race Bike-industry engineers are integrating electronic and electrical technologies in the quest for higher performance, more features-and zero emissions.
Magazine

Momentum, the Magazine for Student Members of SAE International 2010-09-01

2010-09-01
High-speed education @ formula hybrid event Annual competition provides a hands-on learning experience for undergraduate and graduate engineering students. Body-shaped for supermileage Six different single-occupant vehicles designed and built by teams of collegiate engineering students snared four-digit fuel economy at Eaton Corp.'s Marshall, MI, test track during the 31st annual SAE Supermileage competition in June. Mercedes-AMG goes with the current flow Opening the doors on new technology. First flight approaches for 'disruptive' new UAV engine An earlier iteration of UAS' Nightwind 2 in flight, powered by an off-the-shelf industrial engine. Three resume tips for college grads Employers often hire recent graduates to mold new hires to their own corporate culture and work philosophy, leading some employers to look more for potential than for specific experience.
Magazine

Momentum, the Magazine for Student Members of SAE International 2010-02-01

2010-02-01
Giving the blind the freedom to drive A Virginia Tech student team answers a call to action by the National Federation of the Blind's Jernigan Institute. 'Ultimate Youthmobile' of 2030 At the 2009 LA Auto Show, California designers envision the future. BMW's six-cylinder motorcycle Concept points to possible production bike. Modeling and simulation put emphasis on early planning The shift to model-based design and simulation is changing the way aircraft are designed, shifting the focus to the early phases of development. Early planning is critical for success, as is establishing techniques that ensure that files move freely between various work teams.
Magazine

Mobility Engineering: September 2015

2015-09-01
The advent of stop-start technology As environmental concerns grow for R&D teams, OEMs look to bring the strategy further into the mainstream. Recycling opportunities for hybrid/electric vehicle lithium-ion batteries With limited reserves and strict environmental regulations, re-cyclers look to established extraction means to reuse, recycle, and dispose of the used batteries. Cameras look to go the distance Automakers seek vision systems with greater distances, improved reliability, and more functionality, thanks to ruggedized complementary metal-oxide semiconductor technologies. Getting right with composites With composites now a mainstay in most new aircraft de-signs, the engineering emphasis has switched from understanding if they work to thinking through the most efficient way to manufacture them, such as using design-for-manufacturing software.
Magazine

MOBILITY ENGINEERING: Sept 2016

2016-09-01
Types of aircraft passenger-escape systems An overview of existing and potential new methods for assuring aircraft occupant safety. SAE Skill India Initiative: S2I2 A new SAEINDIA collaboration aims to help young engineers acquire "industry-ready" skills. A technology-driven sustainable-agriculture solution Pumping more air into the cylinder is key to solving the CAFE puzzle, and engineers are hard at work figuring out the best ways to do it with turbocharger and supercharger innovation. Rotorcraft icing computational tool development 3D printing machines can't be built fast enough In the additive-manufacturing world, the costs of components are dropping, the technology is becoming more reliable and parts are fabricated faster, allowing industries beyond aerospace to adopt additive technologies, says Oak Ridge Lab's Ryan Dehoff.
Magazine

MOBILITY ENGINEERING: March 2016

2016-03-01
Autonomous vehicles: impact on society Self-driving technology offers plenty of promise, but not everything about autonomous vehicles will be a panacea. Crankshaft reliability by integrated design, simulation, and testing This testing method is proven and beneficial for the design and development of the crankshaft and could be applied to other critical engine components, thereby extending to system reliability. New Engines 2016 Highlighting the design, engineering, and technologies inside some of the most competitive gasoline and light-duty diesel ICEs. Touch and go Avionics developments are changing life in the cockpit and at airborne work stations. Improving heavy-duty engine component efficiencies Cylinder deactivation can improve fuel economy by using a reduced number of cylinders that operate at higher loads and thermal efficiency, while other cylinders are turned off, when the engine operates at partial load conditions.
Magazine

MOBILITY ENGINEERING: June 2017

2017-06-01
Alternative fuels and challenges Automotive powertrain development: virtually-connected hardware co-simulation Functional Safety-progressing towards safer mobility Electric rockets and the future of satellite propulsion Achates powers toward production A potential ICE game-changer, the Achates OP engine is being tooled up for production at one OEM while a new 2.7-L triple for light-truck demonstrations enters the build phase. Engineering with simulation and data Companies are discovering new simulation techniques, especially optimization; the next step is to combine simulation with sensor data and predictive analytics to create even more robust off-highway equipment.
Magazine

MOBILITY ENGINEERING: December 2017

2017-12-01
Rockets re-engineered-a step further into the cosmos Powertrain design for reliability Ice breaker Mazda's Skyactiv-X beats the big companies to market with a promising new engine that marries Otto and Diesel attributes. Advances for off-highway engine design As manufacturers continue to drive out cost and meet a worldwide patchwork of regulatory frameworks, the tools for developing those engines are advancing. From showcase prototypes to advanced analytical techniques, suppliers are helping the cause. Aeroacoustic simulation delivers breakthroughs in aircraft noise reduction Autonomy testing: Simulation to the rescue Autonomous technology development injects new rigors on vehicle-development testing.
Magazine

MOBILITY ENGINEERING

2016-12-01
Focus on advanced safety systems and human-factor interventions The impact of REACH on the aviation sector Considered the most comprehensive chemical-regulation legislation to date, REACH presents serious ramifications for the aircraft industry. Lightweighting: What's Next? Experts weigh in on the challenges and future enablers in the battle to reduce vehicle mass. The best of COMVEC 2016 Autonomous vehicles and improved fuel efficiency via advanced powertrain solutions are pressing topics detailed in this select group of technical papers from the SAE Commercial Vehicle Engineering Congress. Optimizing waste heat recovery for long-haul trucks Autonomous solutions in agriculture Downsizing a HD diesel engine for off-highway applications Zero-emissions electric aircraft: Theory vs. reality
Magazine

Autonomous Vehicle Engineering: September 2019

2019-09-05
Editorial The new 'face' of privacy The Navigator No trust in AI systems without data protection Innovation Nation In the mobility space, Israel is rivaling Silicon Valley for smarts and start-ups - and beats it in chutzpah. Autonomy in your Face Biometric technology is deemed essential to ensuring AV driving safety and advancing the user experience-if privacy issues don't derail its deployment. About Face! To win acceptance, deployment of facial-recognition technology needs to fit within a picture-perfect consumer and legal framework that balances benefits with privacy protection. The Vehicle as Gaming Device Audi spin-off Holoride uses VR to turn the back seat into an entertainment platform. BlackBerry Tech Duo Sees Emergence of Vehicle-based Platforms Though likely to provide the OS of autonomy, BlackBerry also anticipates a larger shift to automobiles as software platforms.
Magazine

Automotive Engineering: December 2, 2014

2014-12-02
2015 Hot Technologies Our annual year-end review of new and significant technology applications for the upcoming model year's vehicles. Can Toyota's Mirai be the next Prius? Toyota's first fuel-cell car has a range of 300 miles, fills up in 5 minutes, and accelerates from 0 to 60 mph in about 9 seconds. Integrated automotive gateway can enable connected cars One of the biggest challenges connected cars pose is the integration of information and consumer electronics into the car and ensuring connectivity among them.
Magazine

Automotive Engineering: April 2018

2018-04-01
Engineering the Motivo Way Broad capabilities, unparalleled project diversity and an innovative culture have put this thriving California "idea factory" in high demand. Steering toward lower NVH Systems-based analysis at Saint-Gobain shows how a small part can make a big difference to steering, and to overall vehicle quality. Not dead yet: The resilient ICE looks to 2050 The mobility industry will need to keep evolving the combustion engine for many years, says Dr. John Heywood. Technology time-warp The road to autonomous driving has been under construction for decades, as showcased by SAE's Mobility History Committee at the 2018 WCX in Detroit.
Magazine

Automotive Engineering: October 6, 2015

2015-10-06
2016 Malibu sheds 300 lb, adds new hybrid system More wheelbase, style, fuel economy, and comfort aim to move GM's volume midsize sedan from the sidelines to the fast lane. Lighter, more powerful 2016 Honda Pilot The third-generation SUV gets a sleek new look and plenty of slick technology for enhanced performance and safety. 2016 Mazda MX-5 stays true to its roots Mazda engineers give the industry a lesson in getting more from less. 2016 Land Rover Discovery Sport spearheads more efficient Land Rovers JLR's space-efficient, flexible SUV moves to JLR's new Ingenium modular engines. Audi chooses high technology, cautious design evolution for new A4 In addition to lighter weight and significant improvements in efficiency, the new car employs plenty of technology and driver support.
Magazine

Automotive Engineering: November 3, 2016

2016-11-03
SAE Convergence 2016 Talk of the healthy aspects of disruption mingles with SAE's renowned technical emphasis to foster the auto industry's continuing evolution toward electrification and autonomy. The Battery Man Speaks The speed of progress in automotive lithium batteries has impressed AABC's Dr. Menahem Anderman. So has silicon-graphite anode technology development from Tesla and Panasonic. Industry 4.0: The smart factory arrives The plants that produce automotive systems and vehicles are increasingly employing intelligent systems, Big Data and advanced analytics to improve quality, safety and efficiency. Editorial: Promise of 48 volts is no shock Nissan unveils variable-compression-ratio ICE for 2018 Infiniti production model Optimizing engine oil warm-up strategies for 'real-world' driving In search of higher-energy-content batteries Making Multiphysics fast and convenient I.D.
Magazine

Automotive Engineering: July/August 2019

2019-07-25
Extending the ICE age Future vehicle propulsion is not a single-solution challenge. Top engineers take Automotive Engineering into the next combustion-engine frontier. FCA's Micky Bly amping up electrification New powertrain boss Micky Bly and his team are building an advanced propulsion-strategy roadmap that includes at least one more ICE development cycle. Ford's Dave Filipe has some powerful choices to make These are interesting days for those managing global propulsion portfolios, but Ford's powertrain lead says a smart team has him relishing the challenges. GM's Ken Morris lives the pace of the powertrain revolution The purview of GM's VP of global product integrity includes the rapidly-shifting landscape of powertrain engineering. Hyundai's John Juriga optimizing ICE and fuels Hyundai is building on its lean-combustion knowledge in a DoE-sponsored collaborative program with MTU and Phillips 66.
Magazine

Automotive Engineering: December 1, 2015

2015-12-01
Hot-stamping process Hot-stamping process from Schuler employs flexible 'pressure controlled hardening' Fuel cell futures no longer a dream Fuel cell technology is catching up with the hype as fuel cell vehicles become reality. Hot Technologies 2016 Our annual review of significant, innovative, and just plain cool technology applications for the new model year.
Magazine

Automotive Engineering: August 2017

2017-08-03
Hacked! Is automotive ready for the inevitable? Cybersecurity experts talk defense strategies. Active Aero takes flight Reconfigurable "smart" aerodynamic aids are stretching performance-car envelopes in every direction. The motorcycle's balanced future With its Ride Assist technology, Honda R&D moves two-wheelers toward autonomous capability. Honoring lightweight innovation Chrysler, Toyota, Faurecia and AP&T recognized with the 2017 Altair Enlighten Award for their efforts to reduce vehicle weight.
Magazine

Automotive Engineering: April 2017

2017-04-01
Thought leadership at WCX17 Proliferating electrification and performance. Clarity of purpose Honda's 2017 Clarity Fuel Cell has impressive performance, zero emissions and zero range anxiety. Clarity is ready for the mainstream, but is hydrogen fuel? Lightweighting hinges on the details Multi-material design approaches require careful integration of all adjacent constituents. Haptic feedback for gesture-control HMI Mid-air gesture controls rely on sophisticated sensing to aid the human-machine interface and help keep drivers' eyes on the road. Road-efficient mud machine Jeep's new Compass benefits from a trick AWD system co-developed with GKN. Past as prelude to the future SAE's Mobility History Committee brings a trove of knowledge- and cool technology. The new Fellow from Ricardo Prof. Neville Jackson will be recognized as an SAE Fellow at WCX17.
X