Refine Your Search

Topic

Author

Search Results

Standard

A Guide for the Selection of Quick-Disconnect Couplings for Aerospace Fluid Systems

1969-02-01
HISTORICAL
AIR1047A
The factors involved in the selection of a quick-disconnect are grouped into the following classifications for the purpose of discussion: a. functional considerations; b. weight considerations; c. environmental performance factors; d. end fitting types; and e. additional considerations. A quick-disconnect coupling as used in this AIR is one that can be rapidly and repetitively connected and disconnected without excessive fluid loss. The relative importance of the design factors depends upon the fluid medium of the particular system in which quick-disconnect is to be used. The effect of the fluid media on each factor is discussed in this report where applicable. The purpose of this AIR is to guide users in the proper selection of quick-disconnect couplings for their specific application in fluid systems.
Standard

A Guide for the Damaging Effects of Tire and Wheel Failures

2018-04-19
WIP
AIR5699A
Consideration for the damaging effects to aircraft from the failure of wheels and tires should be evaluated. This document discusses the types of problems in-service aircraft have experienced and methodology in place to assist the designers when evaluating threats for new aircraft design. The purpose of this document is to provide a history of in-service problems, provide a historical summary of the design improvements made to wheels and tires during the past 40 years and to offer methodology which has been used to help designers assess the threat to ensure the functionality of systems and equipment located in and around the landing gear and in wheel wells.
Standard

A Guide for the Damaging Effects of Tire and Wheel Failures

2007-11-26
CURRENT
AIR5699
Consideration for the damaging effects to aircraft from the failure of wheels and tires should be evaluated. This document discusses the types of problems in-service aircraft have experienced and methodology in place to assist the designers when evaluating threats for new aircraft design. The purpose of this document is to provide a history of in-service problems, provide a historical summary of the design improvements made to wheels and tires during the past 40 years and to offer methodology which has been used to help designers assess the threat to ensure the functionality of systems and equipment located in and around the landing gear and in wheel wells.
Standard

A Guide for Application of Rf Photonics to Aerospace Platforms

2014-11-05
WIP
AIR5601A
This SAE Aerospace Information Report (AIR) is devoted to the challenges of applying optics to new advanced RF analog systems only; digital data link applications are covered elsewhere in protocol/architecture specific documents like Fibre Channel, ATM, Ethernet, Sonet, etc.
Standard

A Graphical Model for Interactive Distributed Control

1997-09-01
HISTORICAL
J2356_199709
The demonstrated architectural model and associated graphical techniques defined herein were developed to provide a simple method of visualizing the general functional operation or behavior of a Distributed Embedded System with a strong emphasis on representing system time characteristics.
Standard

A Graphical Model for Interactive Distributed Control

2007-07-19
CURRENT
J2356_200707
The demonstrated architectural model and associated graphical techniques defined herein were developed to provide a simple method of visualizing the general functional operation or behavior of a Distributed Embedded System with a strong emphasis on representing system time characteristics.
Standard

A GUIDE TO THE DEVELOPMENT OF A GROUND STATION FOR ENGINE CONDITION MONITORING

1994-02-01
HISTORICAL
AIR4175
An effective ground station is vital to the successful implementation of an EMS and is a fundamental part of the total monitoring system design. Unlike on-board processing systems which principally use data to indicate when engine maintenance is required, ground stations offer much greater processing power to analyse and manipulate EMS data more comprehensively for both maintenance and logistics purposes. This document reviews the main EMS functions and discusses the operating requirements which will determine the basic design of a ground station, including the interfaces with other maintenance or logistics systems. A brief discussion is also included on some of the more recent advances in EMS ground station technology which have been specifically developed to provide more effective diagnostic capabilities for gas turbine engines. Finally, this document addresses the program management requirements associated with the initial development and on-going support of a ground station.
Standard

A GUIDE TO AIRCRAFT TURBINE ENGINE VIBRATION MONITORING SYSTEMS

1992-03-10
HISTORICAL
AIR1839A
This Aerospace Information Report (AIR) is a general overview of typical airborne vibration monitoring (AVM) systems with an emphasis on system hardware design considerations. It describes AVM systems currently in use. The purpose of this AIR is to provide information and guidance for the selection, installation, and use of AVM systems and their elements. This AIR is not intended as a legal document but only as a technical guide.
Standard

A Discussion of M85 (85% Methanol) Fuel Specifications and Their Significance

1992-05-01
CURRENT
CRP-002
This report is the result of a Cooperative Research Project undertaken by representatives from GM, Chrysler, Ford, BP Oil, Arco, and Sun Refining and Marketing Co. An information-packed guide, the report includes background information, describes M85 specifications, details the physical properties of M85 vs. gasoline, and examines the effect of M85 on various aspects of vehicle performance and safety. Issued September 1991.
Standard

A Dictionary of Terms for the Dynamics and Handling of Single Track Vehicles (Motorcycles, Mopeds, and Bicycles)

2014-11-19
WIP
J1451
This dictionary of terms was prepared for use by those with a need to describe and understand the dynamics and handling of two-wheeled, single track vehicles. It is intended to span the gap between vehicle dynamics specialists and those with a more general interest. This report is pertinent to such areas as vehicle design and development, the description of two-wheeler properties, rider training and education, and the preparation of standards and regulations. This report was prepared by the SAE Motorcycle Committee, which solicits suggestions for improvements and additions to be considered in future revisions. Comments should be directed to SAE Headquarters.
Standard

A Dictionary of Terms for the Dynamics and Handling of Single Track Vehicles (Motorcycles, Mopeds, and Bicycles)

2007-08-16
CURRENT
J1451_200708
This dictionary of terms was prepared for use by those with a need to describe and understand the dynamics and handling of two-wheeled, single track vehicles. It is intended to span the gap between vehicle dynamics specialists and those with a more general interest. This report is pertinent to such areas as vehicle design and development, the description of two-wheeler properties, rider training and education, and the preparation of standards and regulations. This report was prepared by the SAE Motorcycle Committee, which solicits suggestions for improvements and additions to be considered in future revisions. Comments should be directed to SAE Headquarters.
Standard

A Dictionary of Terms for the Dynamics and Handling of Single Track Vehicles (Motorcycles, Mopeds, and Bicycles)

2000-01-13
HISTORICAL
J1451_200001
This dictionary of terms was prepared for use by those with a need to describe and understand the dynamics and handling of two-wheeled, single track vehicles. It is intended to span the gap between vehicle dynamics specialists and those with a more general interest. This report is pertinent to such areas as vehicle design and development, the description of two-wheeler properties, rider training and education, and the preparation of standards and regulations. This report was prepared by the SAE Motorcycle Committee, which solicits suggestions for improvements and additions to be considered in future revisions. Comments should be directed to SAE Headquarters.
Standard

A Current Assessment of Combining Distortion Types

2019-07-22
WIP
AIR9975
This document will address techniques or methods that have been used within the industry to address the problem of engine stability margin accounting when combinations of distortion types exist in an aircraft installation. Its focus is combining temperature, planar wave, and swirl distortion with time-variant spatial total pressure distortion. Example methodologies will be presented along with example cases where co-existing distortions have been evaluated. It will also address the areas where the industries' knowledge base is lacking (experimental data or computational methods) and the future work that is needed for methodology development in these areas. This document is viewed to be updated every five years as more information (data either experimentally or analytically) becomes available.
Standard

A Conceptual Its Architecture: An Atis Perspective

2003-05-05
CURRENT
J1763_200304
This SAE Information Report represents an information report on a conceptual ITS architecture and its accompanying protocols from the perspective of Advanced Traveller Information Systems providers and users. While a specific logical and physical architecture for ITS is still in the development stages, this conceptual architecture provides a robust general view of ITS functions and interfaces.
Standard

A Conceptual Its Architecture: An Atis Perspective

1995-07-01
HISTORICAL
J1763_199507
This SAE Information Report represents an information report on a conceptual ITS architecture and its accompanying protocols from the perspective of Advanced Traveller Information Systems providers and users. While a specific logical and physical architecture for ITS is still in the development stages, this conceptual architecture provides a robust general view of ITS functions and interfaces.
X