Refine Your Search

Topic

Author

Affiliation

Search Results

Standard

Fluid Systems—Connector Tubes—General Specification and Part Standard

2001-10-26
CURRENT
J24714_200110
This SAE Standard identifies the material and dimensional requirements for component connector tubes and related items for use in fluid power components. Connector tubes are also identified as quills, ferrules or transfer tubes. Connector tubes are used to connect fluid passages within a component or to connect one component to another; for example, connecting control valves to subplates. Related items include plugs, undrilled connector tubes and connector tubes for internal check valves and restrictors.
Standard

Exhaust Brake Dynamometer Test and Capability Rating Procedure

2012-07-02
CURRENT
J2458_201207
This SAE Recommended Practice has been adopted by SAE to specify: a A basis for net engine retarder power rating b Reference inlet air test conditions c A method for correcting observed engine retarder power to reference conditions d A method for determining net engine retarder power with a dynamometer
Standard

Truck Vehicle Identification Numbers

2009-10-29
CURRENT
J187_200910
This SAE Recommended Practice has been established to provide direction for the design and installation of a vehicle identification number assigned to a truck or truck-tractor. In adhering to these standards, facility of application in factory production and appearance are matters for manufacturer control.
Standard

Recommended Remanufacturing Procedures for Manual Transmission Clutch Assemblies

2017-08-22
CURRENT
J1915_201708
This SAE Recommended Practice is prepared as a guideline to improve and maintain the quality of remanufactured automotive products. Installation of remanufactured or rebuilt products is often an economical way to repair a vehicle even though they may not fully be equivalent to original equipment parts. Before processing any part, a remanufacturer should determine if the original design and present condition of the core are suitable for remanufacturing, so as to provide durable operation of the part as well as acceptable performance when installed in a vehicle. The remanufacturer should also carefully consider the safety aspects of the product and any recommendations of the original manufacturer related to remanufacturing or rebuilding their product.
Standard

Recommended Remanufacturing Procedures for Manual Transmission Clutch Assemblies

2000-08-28
HISTORICAL
J1915_200008
This SAE Recommended Practice is prepared as a guideline to improve and maintain the quality of remanufactured automotive products. Installation of remanufactured or rebuilt products is often an economical way to repair a vehicle even though they may not fully be equivalent to original equipment parts. Before processing any part, a remanufacturer should determine if the original design and present condition of the core are suitable for remanufacturing, so as to provide durable operation of the part as well as acceptable performance when installed in a vehicle. The remanufacturer should also carefully consider the safety aspects of the product and any recommendations of the original manufacturer related to remanufacturing or rebuilding their product.
Standard

Numbering System for Multiple Diameter Cutting Tools

1998-10-13
CURRENT
J2276_199810
This SAE Recommended Practice provides a systematic method for the identification of multiple diameter cutting tools. It is intended to assist in the cataloging and supplying of these tools. NOTE 1— Caution must be taken when assigning codes for designators to prevent specifying cutting tools that cannot be physically or economically manufactured. NOTE 2— In particular without limitation, SAE disclaims all responsibility for the accuracy or completeness of information contained within this report if the standards of this report are retrieved, combined, or used in connection with any software.
Standard

AIRFLOW REFERENCE STANDARDS

1995-04-01
CURRENT
J228_199504
The purpose of this SAE Recommended Practice is to establish reference standards for airflow measurements in the ranges required for testing automotive engine induction systems and to describe equipment that will facilitate the use of such standards to check the accuracy of various equipment and methods.
Standard

Performance Requirements for Sealed Beam Motor Vehicle Headlamps

2015-09-10
CURRENT
J2595_201509
This SAE Recommended Practice is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances. This document establishes performance requirements, material requirements, design requirements, and design guidelines for sealed beam headlamps.
Standard

Performance Requirements for Sealed Beam Motor Vehicle Headlamps

2006-05-04
HISTORICAL
J2595_200605
This SAE Recommended Practice is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances. This document establishes performance requirements, material requirements, design requirements, and design guidelines for sealed beam headlamps.
Standard

Heavy-Duty Starter Remanufacturing Procedures

2008-11-26
CURRENT
J2237_200811
These remanufacturing procedures are recommended minimum guidelines (with the understanding that more stringent procedures are acceptable) for use by remanufacturers of heavy-duty starters to promote consistent reliability, durability, and safety of remanufactured starters. Installation of remanufactured or rebuilt products is often an economical way to repair an application even though the products may not be identical to original equipment parts. Before processing any part, a remanufacturer should determine if the original design and present condition of the core are suitable for remanufacturing so as to provide durable operation of the part as well as acceptable performance when installed on the application. The remanufacturer should also consider the safety aspects of the product and any recommendations of the original manufacturers related to remanufacturing or rebuilding their product.
Standard

Automotive Starter Remanufacturing Procedures

2008-06-09
CURRENT
J2073_200806
These manufacturing procedures are recommended minimum guidelines for use by remanufacturers of light-duty automotive starters to promote consistent reliability, durability, and safety of remanufactured starters. Installation of remanufactured or rebuilt products is often an economical way to repair a vehicle even though the products may not be identical to original equipment parts. Before processing any part, a remanufacturer should determine if the original design and present condition of the core are suitable for remanufacturing so as to provide durable operation of the part as well as acceptable performance when installed on the vehicle. The remanufacturer should also consider the safety aspects of the product and any recommendations of the original manufacturers related to remanufacturing or rebuilding their product.
Standard

Alternator Remanufacturing/Rebuilding Procedures Includes Passenger Car, Heavy Duty, Industrial, Agricultural, and Marine

2008-05-13
CURRENT
J2075_200805
These remanufacturing procedures are recommended minimum guidelines (with theunderstanding that being more critical is acceptable) for use by remanufacturers/rebuilders of alternators to promote consistent reliability, durability, and safety of remanufactured alternators. Installation of remanufactured or rebuilt products is often an economical way to repair an application even though the products may not be identical to original equipment parts. Before processing any part, a remanufacturer/rebuilder should determine if the original design and present condition of the core are suitable for remanufacturing/rebuilding so as to provide durable operation of the part as well as acceptable performance when installed on the application. The remanufacturer/rebuilder should also consider the safety aspects of the product and any recommendations of the original manufacturers related to remanufacturing or rebuilding this product.
Standard

FILTER AND FILTER ELEMENT FOR HYDRAULIC SYSTEM(S) USED ON MANUFACTURING AND ASSEMBLY EQUIPMENT

1994-02-01
CURRENT
J2066_199402
This SAE Standard establishes a common specification and ordering code for hydraulic filter assemblies and hydraulic filter elements, and establishes minimum performance criteria and test methods. This document establishes two filter diameter sizes, five basic micron ratings, and two basic collapse ratings. These classifications will satisfy most hydraulic filter applications, and thereby can minimize inventory requirements for hydraulic filter elements.
Standard

Passenger Car Vehicle Identification Number System

1981-12-01
HISTORICAL
J273_198112
This SAE Recommended Practice provides direction for the design of a passenger car Vehicle Identification Number (VIN). This practice supplements SAE J272c. It applies to characteristics of passenger car descriptive and identifying information which are to be set forth in a uniform manner in the vehicle identification number.
Standard

Passenger Car Vehicle Identification Number System

1977-02-01
HISTORICAL
J273A_197702
This SAE Recommended Practice provides direction for the design of a passenger car Vehicle Identification Number (VIN). This practice supplements SAE J272c. It applies to characteristics of passenger car descriptive and identifying information which are to be set forth in a uniform manner in the vehicle identification number.
X