Search Results

Standard

Flight Director Equipment

2020-12-22

CURRENT

AS8008A

This Aerospace Standard covers Flight Director Equipments which display to the pilot a computed command for the operation of an aircraft in accordance with selected Mode(s). The term “Equipment” may include controls, displays, computers, etc. and may include sensors if furnished as a part of the Flight Director.

Standard

Human Interface Criteria for Flight Deck Surface Operations Displays

2020-12-22

CURRENT

ARP5898A

Following a number of high-visibility collisions between aircraft on the airport surface, overall taxi operations have been brought under greater scrutiny. In addition, observation of taxi operations and the results of associated research programs have revealed that the efficiency of taxi operations could be significantly improved with available technologies and by applying a human centered design approach. Surface operations displays have been tested in prototype form and a number of manufacturers are moving toward product definition. This document provides guidance on the design of elements, which may be part of surface operations displays whose objectives would be to enhance safety and to improve overall efficiency of aircraft operations on the airport surface. Such efficiency increases should be realized not only in day-to-day operations, but should also be manifested in training for surface operations.

Standard

House Noise-Reduction Measurements for Use in Studies of Aircraft Flyover Noise

2020-12-22

CURRENT

AIR1081A

Standard

Methods of Controlling Distortion of Inlet Airflow During Static Acoustical Tests of Turbofan Engines and Fan Rigs

2020-12-22

CURRENT

AIR1935A

This Aerospace Information Report provides guidelines for hardware design. Guidelines on such items as engine types, test arrangements, and test purposes that would benefit from the use of an inflow control device during static noise testing are outside the scope of this report.

Standard

BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL SHANK, AMS5643 (UNS S17400), 140 KSI, .5625-18 UNJF-3A

2020-12-22

CURRENT

AS3180B

Standard

Network End-to-End Data Link Evaluation System Transceiver Health Monitoring

2020-12-22

CURRENT

AIR6552/3

This document establishes methods to obtain, store, and access data about the health of a fiber optic network using commercial sensors located in or near the transceiver. This document is intended for: Managers, Engineers, Contracting Officers, Third Party Maintenance Agencies, and Quality Assurance.

Standard

CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, ENGINE APPLICATION, (FOR MIL-DTL-38999 SERIES I, III, AND IV CONNECTORS)

2020-12-22

CURRENT

AS39029/117

Standard

BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .2500-28 UNJF-3A

2020-12-22

CURRENT

AS9924C

Standard

Minimum Performance Standard Stall Warning Equipment

2020-12-22

CURRENT

AS8014A

This Aerospace Standard covers two basic Stall Warning Systems, one measures air flow and pressure distribution on the airfoil and the other measures the angle of airflow with respect to an arbitrary reference line. Each type of system includes, as a minimum, a sensor and the means for activating a device which warns the pilot of an impending stall.

Standard

CONTACTS, ELECTRICAL CONNECTOR, SOCKET REMOVABLE (FOR MIL-PRF-6106 AND MIL-DTL-12883/40 AND /41 RELAY SOCKETS)

2020-12-22

CURRENT

AS39029/92B

Standard

Flight Test Procedures for Static Pressure Systems Installed in Subsonic Transport Aircraft

2020-12-22

CURRENT

ARP921B

This SAE Aerospace Recommended Practice (ARP) covers the test procedures and equipment for performing flight testing on pitot-static systems installed in subsonic transport type aircraft.

Standard

WASHER, CUP, LOCK - EXPANDER NUT CORROSION AND HEAT RESISTANT STEEL, UNS S34700

2020-12-22

CURRENT

AS9952

Standard

CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, (FOR MIL-DTL-38999 SERIES I, III, IV, MIL-DTL-55302 AND AS29600 SERIES A CONNECTORS)

2020-12-22

CURRENT

AS39029/106C

Standard

CONTACTS, ELECTRICAL CONNECTOR SOCKET, CRIMP REMOVABLE (FOR AS81511 SERIES 3 CONNECTORS)

2020-12-22

CURRENT

AS39029/17C

Standard

Maximum-Allowable-Airspeed Instruments (Turbine Powered Subsonic Aircraft)

2020-12-22

CURRENT

AS437B

This SAE Aerospace Standard (AS) covers one type of maximum-allowable-airspeed instrument which gives a continuous indication of both indicated airspeed and maximum allowable airspeed not exceeding 650 knots.

Standard

Automatic Pilots (Turbine Powered Subsonic Aircraft)

2020-12-22

CURRENT

AS440B

This SAE Aerospace Standard (AS) covers automatic pilots intended for use on aircraft to automatically operate the primary and trim aerodynamic controls to maintain stable flight and/or to provide maneuvering about any of the three axes through servo control. Automatic control functions essential for primary or augmented flight control are excluded.

Standard

Rolling Resistance Measurement Procedure for Passenger Car, Light Truck, and Highway Truck and Bus Tires

2020-12-22

CURRENT

J1269_202012

This SAE Recommended Practice applies to the laboratory measurement of rolling resistance of pneumatic passenger car, light truck, and highway truck and bus tires. The procedure applies only to the steady-state operation of free-rolling tires at zero slip and inclination angles; it includes the following three basic methods:

Standard

Qualified Hoses for Marine Applications

2020-12-22

HISTORICAL

J1942/1_202012

The following list consists of hose data provided as of December, 2019, and is for convenience in determining acceptability of nonmetallic flexible hose assemblies intended for usage under 46 CFR 56.60-25. Where the maximum allowable working pressure (MAWP) or type of fitting is not specified, use the manufacturer's recommended MAWP or type of fitting. This list has been compiled by SAE staff from information provided by the manufacturers whose product listings appear in this document. Manufacturers wishing to list their products in this document shall: a Successfully test their hose to the requirements of SAE J1942, Table 1. b Submit a letter of certification to the SAE J1942 test requirements for each specific type of hose tested (see sample table, Table 1) along with the test results.

Standard

Hydraulic Cylinder Rod Corrosion Test

2020-12-22

CURRENT

J1333_202012

SAE J1333 applies to hydraulic cylinders which are components of self-propelled work machines defined in SAE J1116.

Standard

Human Engineering - Principles and Practices

2020-12-22

HISTORICAL

HEB1C

This Engineering Bulletin and its annexes provide guidance on the application of Human Engineering principles and practices to the analysis, design, development, testing, fielding, support, accident investigation, and training for military and commercial products throughout their intended life cycles.