Search Results

Standard

Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 73Ni - 7.0Cr - 16.5Mo Solution Heat Treated

2019-01-04

HISTORICAL

AMS5607F

This specification covers a corrosion and heat-resistant nickel alloy in the form of sheet, strip, and plate.

Standard

Carbon Steel Tubing for General Use Understanding Nondestructive Testing for Carbon Steel Tubing

2019-01-04

CURRENT

J2592_201901

This Information Report describes eddy current testing, flux leakage testing, ultrasonic testing, and magnetic particle testing of steel tubing. The purpose of these testing methods is to expose flaws in the tube material or weld zone, such as discontinuities, seams, cracks, holes, voids, and other imperfections characteristic to the specific construction of the tubing. When agreed upon between the producer and purchaser, nondestructive testing is used in lieu of destructive hydrostatic pressure proof testing. Aircraft and Aerospace applications were not considered during the preparation of this document.

Standard

Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 55 ksi (379 MPa) Yield Strength

2019-01-04

HISTORICAL

AMS4900R

This specification covers one grade of commercially-pure titanium in the form of sheet, strip, and plate 1.000 inch (25.40 mm) and under in nominal thickness.

Standard

Rotary Flap Peening of Metal Parts

2019-01-04

HISTORICAL

AMS2590B

This specification covers procedures and requirements for peening of metal parts with portable, bonded-shot, rotary flap assemblies in accordance with AS2592. The principles of rotary flap peening are similar to conventional shot peening, except conversion of arc height values using the magnetic Almen test strip holder is required for intensity determination.

Standard

Plating, Zinc

2019-01-04

HISTORICAL

AMS2402L

This specification covers the requirements for electrodeposited zinc plating.

Standard

Peening Media Conditioned Carbon Steel Cut Wire Shot, Regular Hardness (45 to 52 HRC) (AWCR)

2019-01-04

HISTORICAL

AMS2431/3E

The complete requirements for procuring the product shall consist of this document and the latest issue of the basic specification, AMS2431.

Standard

Peening Media Conditioned Carbon Steel Cut Wire Shot, High Hardness (55 to 62 HRC) (AWCH)

2019-01-04

HISTORICAL

AMS2431/8C

This specification, in conjunction with the general requirements for peening media covered in AMS2431, establishes the requirements for the procurement of conditioned carbon steel cut wire shot with a hardness of 55 to 62 HRC.

Standard

Peening Media Conditioned Stainless Steel Cut Wire Shot (AWS)

2019-01-04

HISTORICAL

AMS2431/4D

The complete requirements for procuring the product shall consist of this document and the latest issue of the basic specification, AMS2431.

Standard

Nickel Alloy, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and Rings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1975 °F (1079 °C) Solution Heat Treated

2019-01-04

HISTORICAL

AMS5708M

This specification covers a corrosion and heat-resistant nickel alloy in the form of bars, wire, forgings, flash welded rings, and stock for forging, flash welded rings, or heading.

Article

Centre for Modelling & Simulation to develop digital twins for GKN Aerospace additive, composite, and industry 4.0 technologies

2019-01-04

The collaborative development of digital twins will inform additive manufacturing (also known as 3D printing), advanced composites, assembly, and industry 4.0 processes at GKN Aerospace's Global Technology Centre in order to enable the high rate production of aircraft structures.

Standard

Qualification of Hydraulic Tube Joints to Specified Flexure Fatigue Requirements

2019-01-03

WIP

ARP1258C

This SAE Aerospace Recommended Practice (ARP) establishes the method for qualification testing of tube joints and fitting attachments, using the flexure test method described in ARP1185. This qualification test method allows the determination of S-N type stress versus cycles or D-N type deflection versus cycles curves, as illustrated in AIR1418 as an alternate to flexure testing to a minimum endurance stress level.

Standard

INSERT - CRES HELICAL COIL FINE THREAD, STRAIGHT STUD LOCKING, 2.5 DIA NOM LENGTH

2019-01-03

CURRENT

AS3082A

Standard

Ignition Cable Assemblies

2019-01-03

HISTORICAL

J2032_201901

This SAE Standard specifies the general requirements and test methods for non-shielded, high-voltage ignition cable assemblies.

Standard

Ring, Retaining, Spiral, Minimum Distortion, Dimensional and Acceptance Standard for

2019-01-03

CURRENT

AS3219B

This standard establishes dimensional limits and acceptance requirements for uniform cross section spiral retaining rings which have been processed to minimize the amount of distortion and burrs.

Standard

Nickel Alloy, Corrosion and Heat-Resistant, Powder for Additive Manufacturing, 60Ni - 22Cr - 2.0Mo - 14W - 0.35Al - 0.03La

2019-01-03

CURRENT

AMS7013

The intended upper bound of this specification is that the particle size distribution (PSD) of powders supplied shall be <60 mesh (250 µm) and that no powder (0.0 wt.%) greater than 40 mesh (425 µm) is allowed.

Standard

RIVET, UNIVERSAL HEAD, HIGH TEMPREATURE, 347 CRES UNS S34700

2019-01-03

CURRENT

AS123151B

Standard

RIVET, SOLID - UNIVERSAL HEAD, MONEL UNS N04400

2019-01-03

CURRENT

AS9319B

Standard

MOUNTING HARDWARE, CUSHION CLAMP, METAL FOR CABLE HARNESS TYING AND SUPPORT, TYPE V, CLASS 1

2019-01-03

HISTORICAL

AS23190/4C

Standard

SHAFTS FOR BALL BEARING RETAINING SPANNER NUTS AND KEY WASHERS

2019-01-03

CURRENT

AS462A

Standard

FITTING, ADAPTER, PORT, REDUCER

2019-01-03

HISTORICAL

AS5172D