Search Results

1.1 This SAE Aerospace Standard (AS) aims at identifying the design criteria and testing methods adequate to guarantee the ultimate load and operational dependability of cargo restraint strap assemblies with a typical 22250 N (5000 lbf) rated ultimate tension load capability, as used by the airline industry in order to restrain cargo on board civil transport aircraft during flight:

There are many divergent-but-related ideas about how best to leverage simulation to ‘teach’ and test automated vehicles. Global AV simulation experts continue to attack the technology’s persistent obstacles.

This SAE Aerospace Standard (AS) establishes the dimensional and operational requirements for pallet extension devices. It provides support for items of cargo beyond either the short or the long sides of a pallet, allowing increased volume to be achieved in conjunction with pallets meeting the requirements of AS1491 plus additional pallet sizes usable with extensions.

This standard only defines interconnect, electrical and logical (functional) requirements for the interface between a Micro Munition and the Host. The physical and mechanical interface between the Micro Munition and Host is undefined. Individual programs will define the relevant requirements for physical and mechanical interfaces in the Interface Control Document (ICD) or system specifications. It is acknowledged that this does not guarantee full interoperability of Interface for Micro Munitions (IMM) interfaces until further standardization is achieved.

Abstract Reviewers

This document provides recommendations concerning the minimum knowledge and skill guidelines for a composite and metal bond repair inspector. Teaching levels have been assigned to this curriculum to define the knowledge, skills and abilities needed to inspect repairs. Minimum hours of instruction have been provided to ensure adequate lecture and laboratory coverage of all subject matter. These minimums may be exceeded, and may include an increase in the total number of training hours and/or increases in the teaching levels.

Abstract Reviewers

Abstract Letter from the Special Issue Editors

This SAE Standard provides a means for specifying or describing the pertinent properties of fiberboards for automotive applications. The materials normally specified by this standard are defined in SAE J947. The test methods commonly used for fiberboards are defined in SAE J315.

This document defines a set of standard application layer interfaces called JAUS Mobility Services. JAUS Services provide the means for software entities in an unmanned system or system of unmanned systems to communicate and coordinate their activities. The Mobility Services represent the vehicle platform-independent capabilities commonly found across all domains and types of unmanned systems (referred to as UxVs). At present, over 15 services are defined in this document many of which were updated in this revision to support Unmanned Underwater Vehicles (UUVs).

This SAE Recommended Practice pertains to liquid level determination for any fluid compartment of off-road work machines as defined in SAE J1116 and ISO 6165.

Abstract Vehicular automation in the form of a connected and automated vehicle platoon is demanding as it aims to increase traffic flow and driver safety. Controlling a vehicle platoon on a curved path is challenging, and most solutions in the existing literature demonstrate platooning on a straight path or curved paths at constant speeds. This article proposes an algorithmic solution with leader-following (LF) communication topology and constant distance (CD) spacing for platooning homogeneous position-controlled vehicles (PCVs) on a curved path, with each vehicle capable of cornering at variable speeds. The lead vehicle communicates its reference position and orientation to all the follower vehicles. A follower vehicle stores this information as a virtual trail of the lead vehicle for a specific period. An algorithm uses this trail to find the follower vehicle’s reference path by solving an optimization problem.

This specification covers a corrosion-resistant steel in the form of sheet, strip, and plate.

This specification covers a corrosion- and heat-resistant nickel alloy in the form of welding wire.

This specification covers elemental copper in the form of powder (see 8.5).

This document provides physical and environmental requirements for HVEDR on board devices.

This SAE Recommended Practice establishes the communication for the variety of potential functions for plug-in electric vehicle (PEV) customers. This includes features for use case items in SAE J2836/3 that may be PEV/customer optional equipment, such as AC vehicle-to-load (V2L) and AC vehicle-to-vehicle systems. These systems conform to SAE J1772 with variations required to identify to the PEV bidirectional onboard charger (OBC) the mode of operation changes and output requirements. SAE has published multiple documents relating to PEV and vehicle-to-grid (V2G) interfaces. The various document series are listed below, with a brief explanation of each. Figure 1 shows the sequencing of these documents and their primary function (e.g., the SAE J2836 and SAE J2847/1 documents start with smart charging, SAE J2836 and SAE J2847/2 then adds DC charging, etc.). The intent is to have subsequent slash sheets complement each other as more functions and features are included.

Abstract Research into efficient internal combustion (IC) engines need to continue as the majority of vehicles will still be powered by IC or hybrid powertrains in the foreseeable future. Recently, lean-burn gasoline compression ignition (GCI) with high-pressure direct injection has been receiving considerable attention among the research community due to its ability to improve thermal efficiency and reduce emissions. To maximize GCI benefits in engine efficiency and emissions tradeoff, co-optimization of the combustion system and fuel formation is required. Thus, it is essential to study the spray characteristics of different fuels under engine-like operating conditions. In this work, high-pressure spray characteristics are experimentally studied for three blends of gasoline, namely, Naphtha, E30, and research octane number (RON) 98. A single-hole custom-built injector was used to inject fuel into a constant volume chamber with injection pressure varying from 40 MPa to 100 MPa.