Search Results

This specification provides establishes pyrometry exceptions and additions for HIP equipment to those identified in AMS2750.

This SAE Recommended Practice is part of the SAE J2534-2/X_0500 set of documents that extends the SAE J2534-1_0500 API (version 05.00) specification. It defines the common data structures and constants that will be used to implement the extension to the SAE J2534 API. This document will only include the items that are used by the V05.00 API and that are NOT included in SAE J2534-1_0500. It will not include items from older API versions unless they are used by the V05.00 API.

This SAE Recommended Practice is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances. This document establishes additional performance requirements and provides test methods and requirements to evaluate the suitability of plastic material or materials intended for optical applications in motor vehicles. The tests are intended to determine physical and optical characteristics of the material or materials only. Performance expectations of finished assemblies, including plastic components, are to be based on tests for lighting devices, as specified in SAE Standards and Recommended Practices for motor vehicle lighting equipment.

This SAE Recommended Practice describes a standardized interface that connects between a standard personal computer (PC) and vehicle.The purpose of this interface is to enable the reprogramming of emission-related control modules, in 2004 and later model year vehicles. The interface shall consist of the necessary hardware and/or software to support the requirements defined in this document. It is expected that vehicle manufacturers will provide the software application that will control the pass-thru interface, to perform the actual reprogramming. The goal of this document is to ensure that reprogramming software from any vehicle manufacturer is compatible with interface supplied by any tool manufacturer. A common interface for all vehicle manufacturers reduces the tool costs for aftermarket garages, while allowing each vehicle manufacturer to control the programming sequence for the electronic control units (ECUs) in their vehicles.

Ford battery materials sourcing

Dynisma vehicle simulation

Engine downsizing is one the most common methods of coping with strict emission regulations. However, it must be coupled with complementary systems so that the engine performance would meet the standards. That is why new efficient solutions can pave the way toward this goal. The electric forced-induction system (EFIS) is the emerging replacement for conventional forced-induction systems (FIS), namely, turbochargers and superchargers. The reason behind this replacement is the drawbacks associated with FIS, among them are turbo lag and inefficiency in exhaust gas energy recycling. Electrically split turbocharger (EST) is a form of EFIS which offers a great potential for engine downsizing. In this paper, a new approach to EST utilization for lowering the fuel consumption (FC) without compromising performance has been introduced, through which the augmented degree of freedom enabled by an EST is used to optimize the air-charge boosting.

This is a temporary WIP for the purposes of ASEC revising ARP7488.

This standard covers supplemental requirements for low tension primary cable intended for use as Fusible Links (Fuse Links) at a nominal system voltage of 60 V DC (25 V AC) or less in surface vehicle electrical systems. These supplemental requirements are intended to qualify cables for an extreme current overload.

This specification covers a zinc alloy in the form of die castings.

This specification covers the requirements for preparation of aluminum and aluminum alloys for soldering by zinc immersion pre-treatment followed by copper plating and tin or tin-zinc alloy plating.

This SAE Aerospace Recommended Practice (ARP) covers specification requirements for a rotary plow with carrier vehicle. The primary use is to cast heavy concentrations of snow approximately perpendicular to carrier vehicles across and away from airport operational areas, such as runways and taxiways. Rotary plows equipped with spot casting, or loading chutes are also used to cast snow in directions through approximately 100 degrees to the left or right of directly in front of the carrier vehicle, and also to load trucks or trailers used to haul snow away from removal area. The term “carrier vehicle” represents the various self-propelled prime movers that provide the power necessary to move snow and ice control equipment during winter operations.

This specification covers a corrosion-resistant steel in the form of bars, wire, forgings, mechanical tubing, flash welded rings 8.0 inches (200 mm) and under in in thickness, diameter or for hexagons least nominal cross-sectional dimension, and stock of any size for forging or flash welded rings.

This specification covers the engineering requirements for preparing surfaces of both virgin and filled polytetrafluoroethylene (PTFE) materials for bonding and the properties resulting from the treatment.

This specification covers a corrosion-resistant steel in the form of flat wire 0.005 to 0.095 inch (0.13 to 2.41 mm) thick, inclusive.

This specification covers a corrosion-resistant steel in the form of bars, wire, forgings, extrusions, flash welded rings, and stock for forging, extruding, or flash welded rings.

This specification covers the engineering requirements for electrodeposition of a hard nickel and the properties of the deposit.