Search Results

This paper contains a brief description of the Entz electric transmission. Wiring connections are given of the several speeds, for electric braking, for starting the engine and for charging the battery. The statement is made that the electric transmission eliminates and does the work of the friction clutch, the clutch pedal, the transmission gears, the flywheel and separate starting and lighting systems.

The efficiency of the automobile engine, as operated on the Otto cycle, is thought by the author to be too low, and he therefore suggests a method of improving it. He considers the various losses by which heat is dissipated in internal-combustion engines and finds that the best opportunity for increasing thermal efficiency is by an increased expansion of the charge. The author suggests that this expansion be carried 50 per cent further than is ordinarily done. In order to obtain higher efficiency at part load, the suggestion is made that instead of throttling the mixture, the admission valves be closed earlier. In case the expansion is 50 per cent longer than the induction stroke and the cut-off takes place earlier as the load becomes lighter, it will be necessary to vary the fuel opening inversely with the air induced. It is suggested that the fuel valve and cut-off lever be connected together and operated by the accelerator pedal or hand lever on the steering wheel.

After a brief consideration of airplane-engine practice in France, England and Germany, the author outlines the problems encountered in designing a twelve-cylinder aviation engine. He explains at some length the difficulties in determining the connection between propeller and engine and shows why valve-in-head location was chosen. Such features of engine design as the mounting of carbureter and exhaust pipes, methods of fuel and lubricant supply and details involved in selecting the lighting, starting and ignition equipment are considered.

The paper gives the value of certain factors in engine design that are good practice and uses these values to calculate the horsepower of a four-cylinder engine. The author holds that the deciding factor in comparing four-cylinder engines with those of the same displacement but with a greater number of cylinders, is the thermal efficiency. Both the cooling medium and the mechanical losses increase in proportion to the number of cylinders. He suggests in closing, that the demand for power output beyond the possibilities of four cylinders must be met by the use of a greater number.

The author confines his discussion to engines used on pleasure cars, inasmuch as practically all commercial vehicles use the four-cylinder type. The performance expected of their cars by automobile owners is outlined, particularly as regards performance, durability and maintenance cost. In-asmuch as the horsepower required is often determined by the acceleration demanded, the argument in favor of four-cylinder engines is based mainly on a comparison of its acceleration performance with those of engines having a larger number of cylinders. A number of acceleration curves are given for these engines. The paper next considers smoothness of operation at low, medium and high running speeds, asserting that the decrease in inertia forces due to lighter reciprocating parts has made it possible to increase the speed and thus reduce remarkably the vibration of the four-cylinder engine.

The automobile of to-day has been developed mechanically to such a high point that the art of building them, according to the author, is gradually becoming a studio task. The paper outlines the rules of appeal in body design and shows how former types of bodies have lost their appeal because they were not based on correct principles. The author gives the ways in which power, body width, mass, comfort and other car qualities can be suggested by proportions of the body or by its color. He states that the automobile of the future will take every advantage of art knowledge to build up an appeal consistent with its mechanical performance.

The author describes a number of detailed developments that took place during the working out of a line of worm-driven trucks. The details of front axle and steering parts are dealt with at length, the reasons for the final constructions being clearly explained and the constructions themselves well illustrated. Details concerning difficulty with the Hotchkiss type of drive on heavy trucks, troubles with drive-shafts and lubrication of the worm wheel are all covered thoroughly; spring-shackle construction and lubrication, radiator and hood mounting come in for detailed attention and the question of governors is interestingly covered. Brief reference is made to the influence of unsprung weight, the differences between truck and pleasure car practice in this respect being pointed out.

Inasmuch as horses cannot meet the demand for increased farm power, the tractor must come at once. So far the supply of tractors has been entirely inadequate to meet the demand. The author specifiies some of the problems that confront designers of farm tractors. To make the tractor immediately available for farm work, it must be adaptable to practically all of the existing types of horse-drawn implements, besides furnishing belt power for a wide variety of present power-driven farm machinery. In designing tractors it must be remembered that the horse is a very flexible unit, capable of a wide variation in power output. Designing a tractor to furnish the necessary power for the majority of farm conditions, requires an intimate knowledge of crops, soils and farm management. These must be analyzed carefully so as to make the machine have as wide a range of usefulness as possible.

The paper opens with a number of quotations from publications issued by the Army War College and showing the bearing of motor transport on a proper military policy for the United States. The author then describes two experimental trips recently made by motor-truck owners near New York in an effort to determine proper motor-transport operating conditions. A statistical summary is given for these two experimental trips. The Army War College has issued in compliance with instructions of the Secretary of War a “Statement of a Proper Military Policy for the United States,” supplemented by a number of pamphlets dealing with particular features of this military policy in considerable detail. In many of these supplementary pamphlets there appears a considerable amount of material bearing upon the subject of motor transport and from them the brief quotations in the following paragraphs are taken.

The author outlines the constructions that have performed cially that four-cylinder engines carried under a hood are the most satisfactory. The defects revealed by war service are given in considerable detail, the author finding that all of the trucks used had developed some weak point. Radiators and springs are specified as a general source of trouble. The author outlines a number of operating troubles developed under the existing conditions of operation and gives examples of the way these have been remedied. Considerable attention is paid to the methods of operating trucks away from made roads. The methods of fitting chains to the wheels, and the use of caterpillar attachments are described. Dimensions are given for bodies and a number of suggestions made as to their proper construction.

The results are given of laboratory investigations made of a number of different types of carbureters, showing the relation between their gasoline and air consumptions over a wide range. This relation is plotted on so-called quality diagrams, on which is indicated the range between which high power and high efficiency can be expected. A description is given of a carbureter arranged in two stages, the first being used at light load and the second coming into action when the throttle is nearly open, thereby more than doubling the carbureter capacity. Engine performance curves are presented showing the result when only one or both stages of this carbureter are used.

The question as to whether a part should be made or bought is one that must be settled by the individual maker according to the value of his product, the nature of the part, his capital available for manufacturing purposes and the price at which his product is sold. The author describes the practice followed by some of the large companies, showing that in spite of their being quantity producers, they have found it desirable to buy a number of important parts. Certain parts are rarely made by automobile manufacturers, either because they can be bought more cheaply or because the machinery to produce them is intricate. The author sums up the problem by stating that a manufacturer makes the unit on account of not getting deliveries or because he does not get a fair price from the parts maker or an article good enough to satisfy his conditions. In order to give individuality to the product, the car maker often produces certain parts, such as the engine, himself.

Believing that a knowledge of definite, quantitative relations affecting the behavior of vehicle suspensions will lead to a better understanding of the problems of spring design, the author analyses the problem by considering it as a simple system (a single wheel supporting a weight by means of a frictionless spring), and by assuming that this system encounters certain elementary forms of irregularities. Analysis of this problem results in several expressions, the interpreting of which reveals the influence which the varying of specific factors has upon the action of the spring and its suspended load. These expressions take into account the effect of the ratio between sprung and unsprung weight, of speed, of size and kind of irregularity encountered by the wheel, tire inflation, flexibility of the spring, and wheel diameter. Other factors which are considered as a result of interpreting the curves presented are the effect of friction in the suspension, and of synchronism.